Nissan Pathfinder 2003

• Recall 142820 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Nissan north america, inc. (nissan) is recalling certain 2001-2003 maxima, 2002-2006 sentra, 2002-2004 pathfinder, 2007-2011 versa sedan and versa hatchback, 2001-2004 infiniti i30 and i35, 2002-2003 inifiniti qx4, 2003-2008 infiniti fx35 and fx45 and 2006-2010 m35 and m45 vehicles. The vehicles are equipped with non-desiccated, frontal passenger air bag inflators containing phase stabilized ammonium nitrate (psan) propellant that were used as interim remedy parts for previous takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
  nissan will notify owners, and dealers will replace the front passenger air bag inflators with alternate desiccated inflators, free of charge. The recall began february 12, 2020. Owners may contact nissan customer service at 888-737-9511 or infiniti customer service at 888-810-3715.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 112489 [USA]: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
  Nissan north america, inc. (nissan) is recalling certain model year 2001-2003 nissan maxima, 2002-2004 pathfinder, 2002-2006 sentra, 2002-2003 infiniti qx4 and i35, 2003 fx35 and fx45, and 2001 i30 vehicles. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
  nissan will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on june 15, 2015. Owners may contact nissan customer service at 1-800-647-7261. Note: on december 18, 2015 nissan informed nhtsa of an amendment of this recall to remove 2004-2005 infiniti fx35 and fx45 vehicles.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 71285 [USA]: The strut housing may crack and pull away from the inner hood ledge assembly. this may lead to grinding noises, increased steering effort, and possibly the steering column to break, resulting in the loss of steering control, which could result in a crash.
  Nissan is recalling certain model year 1996-2004 pathfinder and model year 1997-2003 infiniti qx4 vehicles originally sold, or currently registered in, connecticut, delaware, iowa, illinois, indiana, massachusetts, maine, maryland, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, washington d.C., west virginia and wisconsin. In areas of the country in which heavy concentrations of road salt are used, a mixture of snow/water and salt may enter an assembly location hole in the upper strut housing, causing water to collect at the mating surface of the strut housing panel and the inner hood ledge assembly. Over time, this snow/water and salt intrusion may result in corrosion of the strut tower housing in some subject vehicles.
  nissan will inspect the strut housing and repair the vehicles as necessary, free of charge. An interim notification letter was sent out in may 2011. The second notice was mailed on july 25, 2011. Owners may contact nissan at 1-800-647-7261.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 85680 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by dope, inc.The list can be found under "document search" located at the bottom of your screen. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 51161 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  ck motorsport will notify owners and replace the noncompliant lamps free of charge. The recall began on july 1, 2006. Owners may contact ck motorsport at 1-909-610-7211.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles manufactured by the vehicle manufacturers.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall R/2020/004 [UK]: Passenger air bag may not deploy correctly
  Passenger air bag may not deploy correctly..
  replace passenger air bag inflator

  Show Content

• Recall 2020003 [Canada]: Airbag
  Issue: this recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety risk: if the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective actions: owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag inflator. The passenger-front airbag module or inflator will be replaced as necessary. Note: the canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

  Show Content

• Recall 2014566 [Canada]: Airbag
  On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: this is an expansion of recalls 2013117 and 2014272. Vehicles that were repaired under the previous campaign are not affected because that remedy would have corrected the subject condition.

  Show Content

• Recall 2014272 [Canada]: Airbag
  On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: this recall supersedes recall 2013117. Vehicles corrected as part of the previous campaign will require re-inspection and/or repair.

  Show Content

• Recall 2013117 [Canada]: Airbag
  On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will inspect and, if necessary, replace the passenger airbag inflator.

  Show Content

• Recall 2011165 [Canada]: Structure
  On certain vehicles operated in areas of heavy road salt usage during winter months, a mixture of snow/water and salt may enter an assembly location hole in the upper strut housing, causing water to collect at the mating surface of the strut housing panel and the inner hood ledge assembly. Over time, this snow/water and salt intrusion may result in corrosion of the strut tower housing structure. If the vehicle continues to be driven in this condition, the strut housing may crack and pull away from the inner hood ledge assembly. Should the strut housing separate and contact the steering column upper shaft, the steering shaft could break. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: dealers will inspect the strut housing and, if no corrosion or only minor surface corrosion is present, an anti-corrosion seal will be applied. If moderate corrosion is present, resin patches will be applied in addition to the sealant. If there is evidence of more significant corrosion, a metal reinforcement plate will be used to reinforce the strut housing assembly. In instances where it is impossible to repair the vehicle, nissan will provide an appropriate remedy.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Air bag inflator rupture investigation # EA15001

  The office of defects investigation (odi) opened pe14-016 in june 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in florida or puerto rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by takata, a tier-one supplier of automotive air bag systems.During the course of pe14-016, odi determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at odis insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included florida, puerto rico, hawaii, and the u.S. Virgin islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to takata for testing.Takatas initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from florida.Accordingly odi requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the gulf states and other coastal areas.Takatas testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During pe14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during pe14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically california and north carolina.Accordingly, odi requested all five of the affected vehicle manufacturers currently using the subject takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.Odis investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five odi reports cited above can be reviewed online at http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
  

  Show Content

• Frame/body structure corrosion investigation # PE11004

  In their defect information report (dir) of april 20, 2011, nissan north america, inc. (nissan) notified nhtsa that it would conduct a safety recall of certain 1996-2004 nissan pathfinder and 1997-2003 infinity qx4 vehicles to repair corrosion damage to the drivers side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including connecticut, delaware, iowa, illinois, indiana, massachusetts, maine, maryland, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia.The dir states in part, "...The strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft."contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealers will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.E., brake master cylinder, left front brake line, abs wire harness, etc.) will also be inspected.
  

  Show Content

Nissan is claiming that nhtsa campaign number: 11v244000 was already addressed on my vehicle. I took my car into the dealership several years ago for a recall but they never fixed this recall because they were too busy. When i call nissan right now they are claiming it was fixed already. This was never fixed and my vehicle is exhibiting the exact issues outlined in the recall. My vin# [xxx]. I am requesting nissan to fix this issue per the recall. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

Nissan is claiming that nhtsa campaign number: 11v244000 was already addressed on my vehicle. I took my car into the dealership several years ago for a recall but they never fixed this recall because they were too busy. When i call nissan right now they are claiming it was fixed already. This was never fixed and my vehicle is exhibiting the exact issues outlined in the recall. My vin# [xxx]. I am requesting nissan to fix this issue per the recall. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

Fuel gauge is not reading correctly repeatedly have to top off my tank that costs me more money than it should to get back and forth to work because i ran out of gas and it costed me $200 to figure out that i need something done about the gas gauge there's so many complaints about this why has it nissan done something about it they should not be able to just let this problem go on and stick the customers that pay thousands of dollars for the vehicles. I was going down the highway after being at the hospital all night with my mother-in-law and me and my wife had to walk several miles just to get cell service to get picked up and my car towed.

Fuel gauge is not reading correctly repeatedly have to top off my tank that costs me more money than it should to get back and forth to work because i ran out of gas and it costed me $200 to figure out that i need something done about the gas gauge there's so many complaints about this why has it nissan done something about it they should not be able to just let this problem go on and stick the customers that pay thousands of dollars for the vehicles. I was going down the highway after being at the hospital all night with my mother-in-law and me and my wife had to walk several miles just to get cell service to get picked up and my car towed.

The gas gauge stopped working a few months ago. Had an appointment to have the fuel sensor replaced. The fuel sensor is fine. The mechanic said it was most likely the gauge. In researching over the past several months, this appears to be a huge problem with the 2003 pathfinder. This should be recalled. I'm not sure why it it isn't since it is a wide spread issue.

Tl* the contact owns a 2003 nissan pathfinder. The contact stated that both mufflers were rusted out. While the vehicle was in reverse, the rear muffler and rear tail pipe were detached due to the rust. In addition, fluid was leaking from the front passenger side of the vehicle to the rear. The vehicle was not diagnosed or repaired. The manufacturer and dealer were not made aware of the failures. The failure mileage was approximately 100,000.

My nissan pathfinders air bag dash light is flashing. I have had it reset and it starts flashing again after a few hours of operation.

My nissan pathfinders air bag dash light is flashing. I have had it reset and it starts flashing again after a few hours of operation.

At speeds over 50 mph the car begins to wobble, have been told this is a common problem involing faulty trailing arm bushing/ rear arm bushing and bearing need to be replaced causing what is coommonly known as the death wobble. But lets up when you let up off the gas? To me this a major safety issue! That many have had this problem, that i have found on on line forums.. Why hasn't nissan recalled this issue?

Common OBD-II Error Codes

• U1000 [1] CAN bus network code
• U1010 [1] SCP (J1850) Invalid or Missing Data for Engine Air Intake