Prevost H3-45 Vip 2006

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2006 PREVOST H3-45 Vip.

ManufacturerKnown WMI(s)Fuel Type
PREVOST
PREVOST VIN Decoder

Use the box here to look up VINs from PREVOST as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2006 PREVOST H3-45 Vip?
     - There are 6 recall(s) for the 2006 PREVOST H3-45 Vip, additional information is below.
NHTSA Mandated Recalls
  • Recall 101806 [USA]: Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.

  • Recall 96569 [USA]: In the event of a crash, the incorrect label may result in difficulty opening the emergency windows. this could increase the risk of personal injury.

  • Recall 72388 [USA]: This interference can cause the transmission to not operate or cause improper shifting, as forward gear can be engaged from neutral only, if the vehicle has been stopped, and if the brake pedal has been depressed. if the malfunction occurs while 'r' (reverse) is being selected, the shifter may possibly change to 'd' (drive), increasing the risk of a crash.

  • Recall 88942 [USA]: This could cause delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.

  • Recall 51743 [USA]: The delayed parking brake application can occur without warning, leading to unintended vehicle rollaway increasing the risk of a crash.

  • Recall 56817 [USA]: Depending on the occurrence and weather situation, driver visibility could be reduced, which could result in a crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • IS-23019 - SUSPENSION: Sway bar collars improvement
  • IS-22106 - EQUIPMENT: H3 lavatory fan retrofit kit
  • IS-21072B - ELECTRICAL SYSTEM: Steering gateway. Revision b - pin 2 and 10 were inverted on connector a139
  • MI22-12B - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: b - general update
  • MI22-12A - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: a - erroneous secondary & accessory tanks location.
  • MI22-12 - SERVICE BRAKES, AIR: Air tanks draining sequence
  • IS-17151C - EXTERIOR LIGHTING: Halogen to led fog light replacement kit. Revision: c - advanced kits canceled
  • IS20-925A - VISIBILITY: Central hvac merv filters installation
  • MI20-08C - STRUCTURE: Storage and startup guidelines: periodically, circumstances arise requiring operators to temporarily park a coach in storage. Whether it is a few weeks or several months, sporadic out of service times or a full stop, prevost recommends foll
  • IS-20925A - POWER TRAIN: Central hvac merv filters installation reva
  • IS-18091A - STEERING: Tie rod 610052 first installation instructions: use these instructions when replacing the drop joint tie rod on s82, s84 / s84u i-beam axles. The new tie rod will be adjusted to the length of the original; however, a steering alignment ne
  • MI20-19A - ENGINE AND ENGINE COOLING: Rev a: mention added concerning ddc series 60 engine sca requirement
  • MI20-19 - EQUIPMENT: Introducing a new engine coolant into service
  • MI02-17A - EQUIPMENT ADAPTIVE/MOBILITY: Revision : a torque value reduced
  • IS-19165A - ELECTRICAL SYSTEM: Lavatory fan retrofit kit applicable for h3 series coaches from r-1012 (1994) revision a: added installation detail at step 8
  • SCi20-16 - ENGINE AND ENGINE COOLING: Fan clutch plate bolts re-torquing
  • IS-20923 - EQUIPMENT: H3 driver⿿s partition lite installation
  • P040200 - ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL: Engine exhaust gas recirculation differential pressure - mechanical system not responding properly us13 ⿿ us20 emissions
  • MI20-08B - EQUIPMENT: Storage and startup guidelines revision: b parts added to suggested material 08-10-2020
  • IS-20922 - EQUIPMENT ADAPTIVE/MOBILITY: Sigma passenger seats partition kit
  • MI20-12 - STEERING: Jerky, noisy or hard to turn steering gearbox. Hydraulic end limiter adjustment. All models ⿿ equipped with rb bosch/zf servocom or servocomtronic steering gearbox
  • MI20-08A - EQUIPMENT: Storage and startup guidelines: rev a: 21516229 replaced by 23381562 20523393 replaced by 21454749 800383 removed 611471 replaced by 611360 70376808 replaced by 21036050 21396642 replaced by 20967831
  • MI20-09 - EQUIPMENT:OTHER:LABELS: Prevost vehicle disinfection procedure
  • MI20-08 - UNKNOWN OR OTHER: Storage and startup guidelines - all prevost vehicles & volvo 9700
  • IS-20905 - EQUIPMENT: Hand sanitizer dispenser installation
  • IS-19064 - STRUCTURE: Baggage door seal replacement
  • MI15-24 - EQUIPMENT ADAPTIVE/MOBILITY: Added: power cables for l.H. Side alternator & fan drive breaker box
  • IS-14076 - EQUIPMENT: This instruction sheets explains how to replace the fuel tank on h-series vehicles. (replacing older series tanks by newer model)
  • SCI19-30 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: The intent of this procedure is to guide you through the steps required to program a mcm especially for the control of the hvac module as described in instruction sheets is-19923.
  • MI19-32 - ELECTRICAL SYSTEM: This maintenance information explains how to install harness #7770134, designed to bypass the engine compartment harness (prevost part), connecting the dpf harness (10-pin connector) and the engine harness (31-pin connector).
  • IS-18091 - STEERING: This instruction sheet explains how to perform the first installation of tie rod 610052 on prevost vehicles equipped with dana s82, s84 / s84u i-beam axles, 1994- today
  • MI18-45A - POWER TRAIN: Vehicles identified below are compatible with a new tie rod design. This new tie rod 610052 has updated ball joints and a fine adjuster sleeve. It replaces former drop type ball joint tie rods. Refer to is-18091 for installation instruction
  • IS-19915 - EQUIPMENT: Mp-1000 multimedia player installation
  • IS-18091 - SUSPENSION: This instruction sheet explains how to install the tie rod 610052.
  • IS-17910A - EQUIPMENT: Message center display (mcd) replacement
  • IS-19916 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This instruction sheet explains how to install the audio converter 405842
  • IS-08006A - LATCHES/LOCKS/LINKAGES: This instruction sheet explains how to relocate engine door gas spring.
  • IS-08006 - ENGINE (PWS): This instruction sheet explains how to relocate engine door gas spring.
  • IS-17906A - ENGINE (PWS): This instruction sheet explains how to install an eld interface kit for prevost vehicles equipped with multiplex detroit diesel engines
  • IS-16103B - EQUIPMENT: This instructions sheet explains how to replace the slide-out module 563430
  • IS-17906 - FUEL SYSTEM, DIESEL: This instruction sheet explains how to install an eld interface kit for prevost vehicles equipped with multiplex detroit diesel engines
  • SCI17-35 - ELECTRICAL SYSTEM:SOFTWARE: This internal instruction explains how to bench program the fms gateway module used in the eld (electronic logging device) interface kit for pre-obd13 vehicles.
  • IS-11003D - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This instruction sheet explains how to remplace master id? With ?Mcm? Module
  • IS-16103A - ELECTRICAL SYSTEM: This instructions sheet explains how to replace slide-out module 563430
  • IS-16903 - EQUIPMENT ADAPTIVE/MOBILITY: This instruction sheet explains how to replace the two older generation (brush type) condenser fans by four newer style (brushless) fans.
  • SCI09-28 - SEAT BELTS: Prevost: installing three-point passenger seat restraint system. The purpose of the following procedure is to facilitate the job and to help identify the difficult areas. Also included models he-41 and he-45 coaches model years 1998-2008; m
  • WB08-07 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Improved air circulation on h3 coaches equipped with wcl and sliding door. In order to improve the passengers comfort it is necessary to increase the air circulation in the overhead compartment as well as behind the wheelchair lift door. *
  • WB08-02A - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: Power window harness- removal of zener suppressor diodes. A faulty diode will cause the burning of the fuse protecting the circuit. Also included model xlii-40, xlii-45 motorhomes & entertainer xlii-45. Model years 2007-2008. Model vip moto
  • MI08-04 - SUSPENSION:FRONT:KING PIN: Front and tag axle hub bearing and king pin periodic maintenance. Bearings must be inspected at intervals of 30,000 miles (48 000km). King pins should be serviced every 6, 250 miles (10,000 km) or twice a year. Also included model vip-45 mt
  • WB07-08 - UNKNOWN OR OTHER: Prevost: replace decal in the main power compartment. Cb11 was changed from 35a to 50a. *js
  • WB07-05 - POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH: Prevost: remove zf transmission neutral position relay on h3 multiplex vehicles. Relay indicating that zf transmission is in neutral position must be removed to avoid fuse burning and to be standardized with other vehicles. *js
  • MI07-06 - SUSPENSION: Prevost: new fixing hardware for the rear height control valve link rod. There is a possibilty that the link rod that connects the height control valve to the drive axels support frame comes apart when the vehicle is moving. Model vip-45mth
  • 0703 - EQUIPMENT:OTHER:LABELS: Prevost - installing decal warning against performing any welding work. *nj
  • 0708 - EQUIPMENT:OTHER:LABELS: Decal replacement in the main power compartment. *kb
  • 0705 - POWER TRAIN:AUTOMATIC TRANSMISSION: Removal of zf transmission neutral position relay on h3 multiplex vehicles. *kb

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.