Prevost X3vip 2019
Vehicle Details: Investigations, Service Bulletins
Below you will find all available information on the 2019 PREVOST X3vip.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| PREVOST |
PREVOST VIN Decoder
Use the box here to look up VINs from PREVOST as well as other manufacturers
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- IS-21072B - ELECTRICAL SYSTEM: Steering gateway. Revision b - pin 2 and 10 were inverted on connector a139
- MI22-12B - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: b - general update
- SP18-35J - POWER TRAIN: P20EE (diagnostic troubleshooting code) solution - nox conversion efficiency. Revision j - range of applicable vins updated.
- MI22-12A - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: a - erroneous secondary & accessory tanks location.
- MI22-12 - SERVICE BRAKES, AIR: Air tanks draining sequence
- IS-17151C - VISIBILITY: Halogen to led fog light replacement kit. Revision: c - advanced kits canceled
- SP18-35J - POWER TRAIN: P20EE (diagnostic troubleshooting code) solution - nox conversion efficiency. Revision j - range of applicable vins updated.
- IS-22902 - WHEELS: Tag axle hub flange - alternate cap screw
- IS21-072 - ELECTRICAL SYSTEM: Steering gateway, revision a : cancel watch dog removal from efd part of the instruction
- MI20-08C - EQUIPMENT: Storage and startup guidelines : part number updates
- WB22-07 - ELECTRICAL SYSTEM: Tgw programming
- IS21-901 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : X3 series envirocare - ions air sanitizer
- IS21-072A - ELECTRICAL SYSTEM: Steering gateway revision a cancel watch dog removal from efd part of the instruction
- IS20-925A - VISIBILITY: Central hvac merv filters installation
- IS22-040 - SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES: Brake pedal seal plate installation kit
- IS21-072 - STEERING: Steering gateway schematic
- IS19-108 - FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES: Surge tank pressure cap replacement
- SP18-39D - POWER TRAIN: Scr converter replacement - aftertreatment system
- SP18-35H - EQUIPMENT:MECHANICAL: P20EE (diagnostic troubleshooting code) solution - nox conversion efficiency
- SP18-35H - POWER TRAIN: P20EE (diagnostic troubleshooting code) solution - nox conversion efficiency
- MI21-13A - EQUIPMENT: An automated test is available to check the big hvac superheat from the driver seat. This test is controlled by multiplex, eliminating interventions and the need to take measures on the vehicle.
- SR19-31C - EQUIPMENT: Engine control module (ecm) software update - engine cooling strategy in high altitude operation revision c: vin range in application box rearranged for h3 coaches
- MI21-06 - FUEL SYSTEM, DIESEL: Diesel exhaust fluid ( def ) contamination in fuel system, inspection and repair a?? From us10 to newer engine generation
- SP18-35F - POWER TRAIN: P20EE (diagnostic troubleshooting code) solution - nox conversion efficiency rev e: expiration date removed
- Mi21-07A - POWER TRAIN:AXLE ASSEMBLY: Ront & tag axle ⿿ unitized hub bearing end play verification and replacement
- MI20-08C - STRUCTURE: Storage and startup guidelines: periodically, circumstances arise requiring operators to temporarily park a coach in storage. Whether it is a few weeks or several months, sporadic out of service times or a full stop, prevost recommends foll
- IS-20925A - POWER TRAIN: Central hvac merv filters installation reva
- MI20-19B - EQUIPMENT: Introducing a new engine coolant into prevost service center network
- MI20-19A - ENGINE AND ENGINE COOLING: Rev a: mention added concerning ddc series 60 engine sca requirement
- MI21-01 - POWER TRAIN: Volvo i-shift transmission replacement - difference between connections at the top of the oil filter housing
- MI21-01 - POWER TRAIN: Volvo i-shift transmission replacement - difference between connections at the top of the oil filter housing
- MI20-19 - EQUIPMENT: Introducing a new engine coolant into service
- MI18-18B - STRUCTURE: General hoisting and towing procedures revision: b updated 2.1 to show rubber chocks, secure front and rear.
- MI20-12 - STEERING: Jerky, noisy or hard to turn steering gearbox. Hydraulic end limiter adjustment. All models a?? Equipped with rb bosch/zf servocom or servocomtronic steering gearbox
- MI20-08A - EQUIPMENT: Storage and startup guidelines: rev a: 21516229 replaced by 23381562 20523393 replaced by 21454749 800383 removed 611471 replaced by 611360 70376808 replaced by 21036050 21396642 replaced by 20967831
- NOx_Conv2 - EQUIPMENT:ELECTRICAL: Repair instructions to address fault codes P207F-00; P20EE-00
- NOX_Conv1 - EQUIPMENT ADAPTIVE/MOBILITY: Repair instructions to address fault codes P207F-00 - reductant quality
- FUELFILTER - ENGINE (PWS): Repair instructions to address fault codes P008A-00; P0087-00
- MI20-09 - EQUIPMENT:OTHER:LABELS: Prevost vehicle disinfection procedure
- MI20-08 - UNKNOWN OR OTHER: Storage and startup guidelines - all prevost vehicles & volvo 9700
- MI15-24 - ELECTRICAL SYSTEM: Added: power cables for l.H. Side alternator & fan drive breaker box
- wb19-39 - VISIBILITY: On the vehicles affected by this bulletin, replace the existing wiper arms by a new and improved version.
- SCI19-20 - ELECTRICAL SYSTEM: On the vehicles affected by this bulletin, the vehicle program has to be upgraded. This allows the intelligent sleep mode (ism) system improvement to prevent batteries drain when ism is enabled. This procedure shows how to generate the vehi
- Wb19-11 - ELECTRICAL SYSTEM: On the vehicles affected by this bulletin, the vehicle program might need to be upgraded to prevent batteries drain when ism (intelligent sleep mode) is enabled.
- WB19-07 - SERVICE BRAKES, AIR: On the independent front suspension (ifs) of the vehicles affected by this bulletin, check and make sure that there is enough clearance between the brake hoses identified in the procedure and their respective support bracket.
- SP18-35B_English - ENGINE (PWS): On vehicles with active code P20EE, perform the following checklist and operations.
- IS-18910 - FUEL SYSTEM, DIESEL: This instruction sheet explains how to install a flap over the diesel filling cap
- IS-16080 - STRUCTURE: This instruction sheet explains how to add drain holes in the slide-out base seal
- MI19-06 - BRAKES (PWS): This maintenance information is published to answer some questions regarding the inverted or ?Trailing? Mounting position of the drive axle brake calipers on prevost vehicles
- IS-18078 - SEAT BELTS: This instruction sheet shows how to install reinforcement for seat belts in the front slide-out.
- MI18-28 - STRUCTURE:BODY:DOOR : On the vehicles affected by this bulletin, the compressor door may be adjusted for proper fit following the procedure below.
- WB18-04 - ELECTRICAL SYSTEM:SOFTWARE: On the vehicles affected by this bulletin, update ems and acm software to the latest version available.
Known Recall Investigations
Alternator front bearing failure investigation # PE21011
Nhtsas office of defects investigation (odi) is opening a preliminary evaluation after receiving a tip from a fleet safety manager concerning alternator front bearing failures that cause elevated temperatures within the engine compartment, resulting in the fire suppression system (fss) activating, immediately shutting the engine down, and rendering the bus inoperable. Review of early warning reporting data identified 9 field reports for model year (my)2015 through my2019 h3 and x3 prevost buses, describing alternator failures in any of 3 alternators equipped on the bus. In some cases, a minor fire occurred damaging nearby electrical harnesses. An immediate shut down of the bus can increase the risk of a crash or injury of passengers when transferring to another bus.Odi is opening this investigation to evaluate the cause, consequence, scope and frequency of the alleged defect in the subject prevost buses.