Sterling A-line 2010

• Recall 71063 [USA]: If the driver is slow to react during this esc intervention, the vehicle may deviate from the intended line of travel increasing the risk of a crash.
  Daimler trucks is recalling certain model year 2006-2012 freightliner business class m2, cascadia, century, columbia, coronado and sterling a-line vehicles built with meritor wabco electronic stability control (esc) system manufactured from september 15, 2005 through september 1, 2011. Under certain road and driving conditions, vehicle body roll and road inclination characteristics may adversely affect the slip angle calculation of the electronic stability control (esc) system. This might cause the esc to perceive an over steering situation and therefore apply the outer wheel brake on the front axle until the vehicle is perceived to be stable.
  daimler trucks will notify owners, and dealers will replace the esc module with the appropriate software version as necessary, free of charge. An interim owner notification will be mailed on or about november 21, 2011. The date for availability of the final remedy is subject to validation testing and parts availability. The safety recall began on march 28, 2012. Owners may contact daimler trucks toll-free at 1-800-547-0712.
  daimler safety recall number is fl-612.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 83955 [USA]: Mislocated welds may result in torsional and axial strength falling below acceptable levels. this condition could result in separation of the steering column, loss of steering control and a vehicle crash without warning.
  Daimler trucks (dtna) is recalling certain model year 2009 and 2010 freightliner business class m2, sterling acterra, a-line, and l-line heavy trucks manufactured from september 8, 2008 through april 20, 2009 equipped with trw igen3 intermediate steering columns. The weld around the igen3 steering shaft tube that secures the spline tube to the intermediate tube may be mislocated (i.E., not fully over the seam created when the tubes are pressed together.)
  dtna will notify owners and the buses will be repaired free of charge. The safety recall began on december 23, 2010. Owners may contact dtna at 1-800-547-0712.
  dtna's recall campaign number is fl-582.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 66951 [USA]: An oil leak may result in a fire.
  Daimler trucks is recalling model year 2004-2010 trucks equipped with caterpillar c15 engine. The variable valve actuation oil line may rub against the p-clips retaining the oil line, causing an oil leak.
  daimler trucks is working with caterpillar to remedy these vehicles. Please see caterpillar's defect report 09e-020. Caterpillar will inspect and repair the necessary components free of charge. The recall began on may 5, 2009. Owners may contact caterpillar toll-free at 1-800-447-4986 or daimler trucks at 1-800-547-0712.
  daimler trucks recall no. Fl-558. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2011346 [Canada]: Other
  On certain vehicles, specific operating conditions (such as tight, successive, highly banked curves in opposite directions), could trigger unintended electronic stability control (esc) system intervention. As a result, the esc may unnecessarily apply one of the front brakes in order to correct the perceived oversteer condition. This may cause the vehicle to deviate from the intended path, thereby increasing the risk of a crash causing property damage and/or personal injury. Correction: dealers will replace the esc module.

  Show Content

• Recall 2010227 [Canada]: Steering
  On certain vehicles, the weld around the steering shaft tube, which joins the splined tube to the non-splined intermediate tube, may be mislocated. An improperly located weld bead may allow the splined tube and non-splined tube to rotate relative one another during a low speed, high torque turn, resulting in a possible separation of the tubes. This could cause a loss of steering control which could result in a crash causing property damage and/or personal injury. Correction: dealers will inspect and, if necessary, replace the steering shaft.

  Show Content

• Recall 2009270 [Canada]: Engine
  On certain vehicles equipped with a caterpillar c15 engine, the variable valve actuation (vva) oil line may wear against the p-clip retaining the oil line. An oil leak could result in a vehicle fire causing property damage and/or personal injury. Correction: caterpillar dealers will replace the vva oil line with an updated version.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.