Temsa Ts30 2017

Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2017 TEMSA Ts30, manufacturered by Temsa Skoda Sabanci Ulasim Araclari A.s..
The vehicle is described as a Cross Country/Intercity Bus .

ManufacturerKnown WMI(s)Fuel Type
TEMSANLT NLT Diesel
TEMSA VIN Decoder

Use the box here to look up VINs from TEMSA as well as other manufacturers

#

Sub-models: - Ts 30 -

Frequently Asked Questions
  • Where is the 2017 TEMSA Ts30 produced?
     - The 2017 TEMSA Ts30 is produced in Adana Adana, Turkey.
  • Are there recalls for the 2017 TEMSA Ts30?
     - There are 1 recall(s) for the 2017 TEMSA Ts30, additional information is below.
  • What is the GVWR of a 2017 TEMSA Ts30?
     - The 2017 TEMSA Ts30 has a GVWR of Class 7: 26,001 - 33,000 lb (11,794 - 14,969 kg) lbs.
NHTSA Mandated Recalls
  • Recall 133752 [USA]: If there are contaminants in the fire suppression dry chemical, the chemical may discharge improperly, affecting the suppression of a fire and increasing the risk of injury.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2023-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2023 for temsa.
  • TS30-FC-2106 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: To modify the fuel pump cover
  • TS-C115 - SUSPENSION: This bulletin defines alignment specifications of the ts35 vehicle. Alignment of ts 30.
  • TC-C113 - SUSPENSION: This bulletin defines alignment specifications of the ts30 vehicle. Alignment specifications of ts 35.
  • No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for temsa.
  • TS-C109 - POWER TRAIN: For ease of access to oil dipstick of the transmission, filling rod has been rerouted. Relocating transmission oil dipstick.
  • TS35E - EQUIPMENT: The lift
  • TEMSA GLOBAL-1 - EQUIPMENT: Temsa non exclusive authorised service center agreement
  • TEMSA GLOBAL - EQUIPMENT: This booklet is published for serila production vehicles refer to e-doc online to access the most up-to-date booklets by entering vehicle vin number.
  • Temsa Posta 25oc - EQUIPMENT:RECREATIONAL VEHICLE/TRAILER: Bathroom lock latch bolt
  • TS-35 9033-20Y - EQUIPMENT: Fire instructions: actions to be taken in the event of a fire.
  • TS-U111 - FUEL SYSTEM, GASOLINE: New flap is to be installed in fuel tank filler cap
  • TS-U107 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: New flap is to be installed in fuel tank filler cap
  • TS-C105 - EQUIPMENT: Relocating transmission oil dipstick
  • RAS SYSTEM BLEED - STEERING: Following document shows how to set tag axle steering system cylinders and bleeding the tag axle steering system
  • No comms 2020-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2020 for temsa.
  • TS-C113 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Alignment sepcifications of ts30. This bulletin defines alignment specifications of the ts30 vehicle.
  • TS-C109 - POWER TRAIN: Relocating transmission oil dipstick. For ease of access to oil dipstick of the transmission, filling rod has been rerouted.
  • Information Docu - POWER TRAIN:AUTOMATIC TRANSMISSION: Information document sheet.
  • TS-U111 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
  • TS-U107 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
  • TS-C105 - POWER TRAIN: Relocating transmission oil dipstick.
  • RAS SYSTEM BLEED - STEERING: Instructions on how to set tag axle steering system cylinders and bleeding the axle steering system.
  • TS35E w Lift (1) - EQUIPMENT: Vehicle schematics
  • Temsa Authorised - EQUIPMENT: Temsa non exclusive authorised service center agreement
  • 9020-230Y - ELECTRICAL SYSTEM: Ts 35 epa13 wiring. Refer to section 6 and section for hardware pin-out of moki, zr32, multiplexers, and can lines. As the multiplex unites are controlled by special algorithm, in case needed, the latest vehicle program should be downloade
  • TS-S129 - ELECTRICAL SYSTEM: Safety recall service bulletin for firetrace fire suppression system nozzle replacement
  • ASA-M3R1T-03REV0 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Service agreement between manufacturer and dealer
NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Body ClassBus
Brake System TypeAir
Bus TypeTourist Coach
Cooling TypeWater
DisplacementCC6700.0
DisplacementCI408.85908543470
DisplacementL6.7
Engine ConfigurationIn-Line
Engine Cycles4
Engine Cylinders6
Engine ManufacturerCummins
Engine ModelEPA16
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryDiesel
Fuel Type SecondaryDiesel
GVWRClass 7: 26,001 - 33,000 lb (11,794 - 14,969 kg)
MakeTEMSA
MakeID563
ManufacturerTEMSA SKODA SABANCI ULASIM ARACLARI A.S.
Manufacturer Id1129
ModelTS30
ModelID9772
Model Year2017
NCSA Body TypeCross Country/Intercity Bus
NCSA MakeOther Make
NCSA ModelBus: Rear engine, Flat front
Other Bus InfoLength: 29.5FT~ 31FT, Body - Decker: STD Decker Stainless Steel, Motorcoach
Other Engine Info245~329 BHP; High-Pressure common rail (HPCR) system
Plant CityADANA
Plant CountryTURKEY
Plant StateADANA
TurboYes
VINNLTAPLY52H1000179
Valve Train DesignOverhead Valve (OHV)
Vehicle DescriptorNLTAPLY5*H1
Vehicle TypeBUS
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
NLTAPLY53H10001882017TS 30ADANA ADANA, TURKEY
NLTAPLY52H10001792017TS30ADANA ADANA, TURKEY

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.