Van-hool Tx40 2019

Vehicle Details: Service Bulletins

Below you will find all available information on the 2019 VAN-HOOL TX40.

ManufacturerKnown WMI(s)Fuel Type
VAN-HOOL
VAN-HOOL VIN Decoder

Use the box here to look up VINs from VAN-HOOL as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SB2372 - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: This service bulletin provides you with information about the location of emergency side window decals so that the vehicle meets the national highway traffic safety administrationa??S (nhtsa) federal motor vehicle safety standards (fmvss)
  • SB2393 - SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE: Van hool regularly receives questions regarding the bolts securing the wheel suspension arms of the front axle and tag axles to the chassis. The purpose of this service information bulletin is to inform and is partly a reminder of what al
  • SB2255 - EQUIPMENT:ELECTRICAL: Service information: in its production process, bock, manufacturer of refrigerant compressors, has switched to a new type of motor protection switch for the electric motor of the refrigerant compressor. As the mp10 motor protection switch (
  • SB1709 - WHEELS: Product improvement: all vehicles with light-alloy wheels - introduction of wheel-end monitoring system (wem). Van hool has released a wheel-end monitoring system (wem) which can be installed on all vehicles equipped with light-alloy wheels
  • SB2128 - EQUIPMENT: Service information: removal and installation of shaw def tank sensor unit the purpose of this service information bulletin is to inform you about the removal and installation of a shaw def tank sensor unit.
  • SB2094 - FUEL SYSTEM, OTHER: Product improvement: introduction of new generation def tank sensor unit some previous manufactured def tank sensor units are no longer available as spare part. This service bulletin gives you information about the visual points of differe
  • SB2039A - POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY: Service information - introduction of new 4/2 solenoid valve in compressed-air circuit van hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous knorr-bremse (bosch) soleno
  • SB1856 - POWER TRAIN: Service information - maintenance operations related to refrigerant compressor oil this service information bulletin is a reminder/update about refrigerant compressor oil maintenance. To ensure a reliable system, it is important to perform
  • SB1328 - WHEELS: Dana, manufacturer of axles, has informed van hool that the procedure for checking the wheel bearing end-play has been changed.
  • SB1285 - SEAT BELTS: To check anchorage of passenger seats.
  • SB2039 - EQUIPMENT: Service information bulletin: van hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous knorr-bremse (bosch) solenoid valve (vh11102170) is no longer made available as spare
  • SB1961 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Service information bulletin: what to do in case of prolonged vehicle standstill. This service bulletin provides an overview of works to be performed during prolonged vehicle standstill.
  • SB1702 - ENGINE AND ENGINE COOLING: Service information bulletin: stress-free installation of flex pipe this service bulletin gives step-by-step instructions on how to install the flex pipe properly. The flexible part of the flex pipe handles thermal expansion and engine vib
  • MIC-VANH-090820 - EQUIPMENT: Van hool n.V. And abc companies did not release any new service bulletins during the month of august 2020.
  • SB1796 - ENGINE (PWS): Service information: he purpose of this service bulletin is to inform you about the innocent traces of lubricant at the bottom of the transmission bell housing on new vehicles. They are caused by the protective anti-corrosion coating at the
  • SB1777 - STRUCTURE: Service information: this bulletin is being released as a reminder of the importance of wheel bearing preventive maintenance. Check the wheel bearing end-play every 50,000 miles*, and when having any work done on the brakes or any other com
  • SB1746 - ENGINE (PWS): Field change program: it has come to the attention of van hool that the fire suppression system, when activated while driving, shuts down the engine after 15 seconds. As a result of this, the door brake is automatically applied. To preven
  • WP1048 - EQUIPMENT: To retrofit from iteris to wabco ldw2 lane departure warning system. Van hool has released a work procedure to assist abc companies in successfully retrofitting a tx.. Coach factory equipped with an iteris ldw system to a wabco ldw2 system.
  • SB1634 - EQUIPMENT ADAPTIVE/MOBILITY: Product improvement. Introduction of new single check valves in cooling-circuits deaeration lines.Van hool have recently switched over into production a new type of single check valve. Contrary to the previous type equipped with a plastic h
  • SB1645 - WHEELS: To remove/install wheel-nut caps. Some vehicles have plastic chrome-coloured wheel-nut caps on top of the wheel nuts. This service bulletin gives instructions on how to remove/install these wheel-nut caps correctly.
  • SB1597A - SERVICE BRAKES, AIR: Compressed-air brake system functional check. These tests are designed to identify the cause(s) of a sluggish performance and/or leaks in the system. The tests give you a general idea of the system condition. The procedures described in thi
  • SB1580 - STRUCTURE: California proposition 65 decal. Vehicles delivered to the state of california from january 2018 onwards must have the california proposition 65 decal installed at the inside of the vehicle near the upper right or left corner of the driver
  • SB1560 - ENGINE AND ENGINE COOLING: Improper operating coolant surge tank filler cap. We received a number of complaints regarding frequent coolant loss at the overflow line of the coolant surge tank filler cap. Tests have shown that this is due to the installation of a batch
  • SB1299B - WHEELS: Introduction of new generation dana g171 drive axles. Dana corporation have changed the wheel end bearing of the g171 drive axle from "unitized" to "compact" bearings. In line with this change associated components such as spindle, hub, hu

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.