Acura Tl 2003

• Recall 141922 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain 2003 acura 3.2cl, 2002-2003 3.2tl, 2003-2006 mdx, 2001-2007 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2006 cr-v, 2003-2011 element, 2002-2004 odyssey, 2003-2008 pilot and 2006 ridgeline vehicles. These vehicles are equipped with driver frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began august 12, 2019. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are q5a and y58.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 140797 [USA]: An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling specific 2003 acura 3.2cl, 2013-2016 ilx, 2013-2014 ilx hybrid, 2003-2006 mdx, 2007-2016 rdx, 2002-2003 3.2tl, 2004-2006, and 2009-2014 tl, 2010-2013 zdx and 2001-2007 and 2009 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2007 and 2010-2011 cr-v, 2003-2011 element, 2007 fit, 2002-2004 odyssey, 2003-2008 pilot, and 2006-2014 ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.
  honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began april 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is o41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is u40.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 107166 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2001-2007 accord, 2001-2005 civic, 2001-2004 honda civic gx, 2003-2005 honda civic hybrid, 2002-2006 cr-v, 2003-2011 element, 2002-2004 odyssey, 2003-2008 pilot, 2006 ridgeline, 2003 acura 3.2cl, 2003-2006 acura mdx, and 2002-2003 acura 3.2tl vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.
  honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on july 1, 2015. Owners may contact honda customer service at 1-888-234-2138. Owners may contact acura customer service at 1-800-382-2238, select option 4. Note: vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to september 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after september 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: this recall fully supersedes recalls 08v-593, 09v-259, 10v-041, 11v-260, 14v-351 and 15v-153. Honda's numbers for this recall are jq9, jr0, jr1, jr2, jr3, jr4, jr5, jr6, jr7, and jr8.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 62617 [USA]: Gear failure could result in transmission lockup, which could result in a crash.
  On some mini vans, sport utility and passenger vehicles, certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or gear breakage.
  on vehicles with 15,000 miles or less, the dealer will update the transmission with a simple revision to the oil cooler return line to increase lubrication to the second gear. On vehicles with more than 15,000 miles, the dealer will inspect the transmission to identify gears that have already experienced discoloration due to overheating. If discoloration exists, the transmission will be replaced if discoloration is not present, the dealer will perform the revision to the oil cooler return line. The recall began on april 21, 2004, for pilot, odyssey, and mdx owners. Owners of the accord vehicles will start receiving letters on june 28, 2004, and on june 29, 2004, for owners of the tl and cl vehicles. Owners should contact honda at 1-800-999-1009 or acura at 1-800-382-2238.
  honda recall nos. P30 (odyssey and pilot),p31 (mdx), p38 (accord) and p39 (acura).Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 746 [USA]: If the timing belt breaks, the engine will stall, increasing the risk of a crash.
  On certain minivans, sedans, coupes, and sport utility vehicles equipped with v6 engines, a timing belt tensioner pulley on the water pump is misaligned and could cause the timing belt to contact a bolt on the cylinder head. Eventually the belt could be damaged and fail.
  dealers will inspect the water pump and if it is one of the defective pumps, the water pump and timing belt will be replaced. Owner notification began august 30, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact honda at 1-800-999-1009 or acura at 1-800-382-2238.
  also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2019323 [Canada]: Airbag
  Issue: on certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: this is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall. Safety risk: if the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective action: owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. Note: the canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

  Show Content

• Recall 2019117 [Canada]: Airbag
  Issue: on certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: this recall only affects certain vehicles that had a takata airbag inflator installed during a previous airbag recall or collision repair. Safety risk: in a crash where the airbag deploys, there could be an increased risk of injury. Corrective action: the company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.

  Show Content

• Recall 2015225 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall supersedes special service campaign 2014567. Correction: dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844

  Show Content

• Recall 2014567 [Canada]: Airbag
  Honda canada is conducting a voluntary safety improvement campaign concerning the driver's airbag inflator on certain vehicles equipped with takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the motor vehicle safety act. Note: this special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: click here for more information

  Show Content

• Recall 2011419 [Canada]: Airbag
  On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants. Correction: dealers will replace airbag inflator.

  Show Content

• Recall 2010042 [Canada]: Airbag
  On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants. Correction: dealers will replace airbag inflator. Note: honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844 update june 2016: new u.S. Research shows that these takata airbags may be at higher risk of failure. Please ensure you have this recall done if your vehicle is affected.

  Show Content

• Recall 2004143 [Canada]: Powertrain
  Certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or, in very rare cases, gear breakage can occur. Gear failure could result in transmission lock-up. Correction: on vehicles with 24 000 kms or less, the dealer will update the transmission with a simple revision to the oil cooler return line to increase lubrication to second gear. On vehicles with more than 24 000 kms, the dealer will inspect the transmission to identify gears that have already experienced discoloration due to overheating. If discolouration exists, the transmission will be replaced. If discolouration is not present, the dealer will perform the revision to the oil cooler return line.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the ACURA Tl 2003 as well as their FCC IDs if available

• R-AC-H2T: 1998-2003 Honda Accord Acura TL / 4-Button Keyless Entry Remote / KOBUTAH2T (AFTERMARKET)
  FCC ID: KOBUTAH2T

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Air bag inflator rupture investigation # EA15001

  The office of defects investigation (odi) opened pe14-016 in june 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in florida or puerto rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by takata, a tier-one supplier of automotive air bag systems.During the course of pe14-016, odi determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at odis insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included florida, puerto rico, hawaii, and the u.S. Virgin islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to takata for testing.Takatas initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from florida.Accordingly odi requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the gulf states and other coastal areas.Takatas testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During pe14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during pe14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically california and north carolina.Accordingly, odi requested all five of the affected vehicle manufacturers currently using the subject takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.Odis investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five odi reports cited above can be reviewed online at http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
  

  Show Content

• Automatic transmission sudden downshift investigation # PE02081

  See attached report.
  

  Show Content

Rear subframe rusted

Rear subframe rusted

Tl* the contact owns a 2003 acura tl. The contact stated that while driving at various speeds, with the accelerator pedal depressed, the vehicle jerked and hesitated. The contact stated that the vehicle failed to shift above third gear. There was no warning light illuminated. The contact referenced the failure to nhtsa campaign number: 04v176000 (power train). The vehicle was taken to an independent mechanic who diagnosed the vehicle with a defective speed sensor. The dealer nor the manufacturer had been notified of the failure. The vehicle was not repaired. The failure mileage was approximately 230,000.

Tl* the contact owns a 2003 acura tl. The contact stated that while driving at various speeds, with the accelerator pedal depressed, the vehicle jerked and hesitated. The contact stated that the vehicle failed to shift above third gear. There was no warning light illuminated. The contact referenced the failure to nhtsa campaign number: 04v176000 (power train). The vehicle was taken to an independent mechanic who diagnosed the vehicle with a defective speed sensor. The dealer nor the manufacturer had been notified of the failure. The vehicle was not repaired. The failure mileage was approximately 230,000.

Srs light is on

Srs light is on

2003 acura t.L was in motion when the vehicle started slipping on 2nd gear. Then when vehicle was stationary it would not move in reverse gear. As i was on highway the car started jerking out of control, i could not accelerate, vehicle barely wanted to move so i put it in #2 gear so it work catch and i was able to drive to safety without anyone getting hurt. Very frightening and dangerous. Problem must be addressed immediately.

2003 acura t.L was in motion when the vehicle started slipping on 2nd gear. Then when vehicle was stationary it would not move in reverse gear. As i was on highway the car started jerking out of control, i could not accelerate, vehicle barely wanted to move so i put it in #2 gear so it work catch and i was able to drive to safety without anyone getting hurt. Very frightening and dangerous. Problem must be addressed immediately.

Tl* the contact owns a 2003 acura tl. The contact stated that the gear did not shift properly and the check engine indicator illuminated. The vehicle was taken to acura of laurel (301-498-3322, located at 3506 laurel fort meade rd, laurel, md 20724) where it was diagnosed that the transmission needed to be replaced at the contact's expense. The manufacturer was made aware of the failure and informed the contact to take the vehicle to the dealer. The vehicle was not repaired. The vin was included in nhtsa campaign number: 04v176000 (power train). The failure mileage was approximately 111,000. Parts distribution disconnect.

Common OBD-II Error Codes

• P1456 [1] Evap Emission Control Sys Vent Control Valve Circuit
• P1457 [2] Unable To Bleed - Up Vacuum in Tank
• P0172 [1] System too Rich (Bank 1)
• P0175 [1] System too Rich (Bank 2)
• P1706 [1] Reverse Engagement Error
• P0780 [1] Shift Malfunction
• P0301 [3] Cylinder 1 Misfire Detected
• P0305 [1] Cylinder 5 Misfire Detected
• P0758 [1] Shift Solenoid B Electrical
• P0763 [1] Shift Solenoid C Electrical
• P1758 [1] P1758
• P0710 [3] Transmission Fluid Temperature Sensor A Circuit Malfunction
• P1656 [1] Engine oil pressure warning lamp - circuit malfunction
• P0306 [2] Cylinder 6 Misfire Detected
• P0133 [1] 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)
• P1399 [1] Glow Plug Circuit High Input (Bank #2)
• P1676 [1] P1676