Freightliner Classic Xl 2007

• Recall 155236 [USA]: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.
  Daimler trucks north america llc (dtna) is recalling certain 2006-2020 freightliner columbia, 2006-2021 freightliner business class m2, 2007-2020 freightliner coronado, 2014-2021 freightliner 122 sd, 2007 sterling a 9500, 2006 freightliner argosy, 2006-2007 sterling at9500, 2008-2021 freightliner cascadia, 2006-2008 freightliner classic, 2006-2011 freightliner century class, 2006-2010 freightliner fld, and 2017 western star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 108, "lamps, reflective devices, and associated equipment."
  dtna will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began may 29, 2020. Owners may contact dtna customer service at 1-800-547-0712. Dtna's number for this recall is fl848.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 94606 [USA]: The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.
  Daimler trucks is recalling certain model year 2005-2011 freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from november 1, 2004, through june 15, 2010 for the rack and pinion steering system. The lower pinion bearing may corrode and fail. A failed bearing may lead to damage of the spool valve seals. A damage spool valve seal may allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.
  daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in december 2011. Owners may contact daimler trucks toll-free at 1-800-547-0712.
  daimler trucks' safety recall number is fl-614.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 88777 [USA]: If a leak continues undetected under certain conditions, fuel may ignite at a hot engine surface and/or fuel may be spilled on the road surface.
  Daimler trucks is recalling 62,000 my 2005-2007 freightliner business class, century class, columbia, coronado, fld, classic, sterling a-line, l-line, and western star 4900 trucks. A fractured fuel line could leak diesel fuel.
  high pressure fuel lines and transfer tubes will be inspected and replaced free of charged. The recall began on july 9, 2008. Owners may contact daimler trucks at 1-800-547-0712.
  daimler truck recall no. Fl-526.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 88476 [USA]: There is a possibility that the fifth wheel may fail to latch without the driver's knowledge. when the occurs, the driver could drive away and the trailer could become disengaged increasing the risk of a crash.
  On certain truck-tractors equipped with holland simplex se or se ii fifth wheels, the latch lever pivot bolt assembly may have been over-tightened which could distort the pivot bolt spacer sleeve. Corrosion or contaminates in the pivot may cause it to bind and prevent the fifth wheel jaw from latching securely around the trailer king pin.
  dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer. The recall began on january 3, 2008. Owners may contact freightliner at 1-800-547-0712.
  freightliner recall no. Fl-514.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 72596 [USA]: A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash may occur.
  On certain trucks equipped with rack and pinion steering, the ball socket assembly at the inner end of the driver side tie rod may be damaged in a sharp turn. Excessive tie rod angles may loosen the tie rod in the ball socket or damage the threaded tie rod socket attachment to the steering rack on the driver side. The threaded end of the ball socket assembly may fracture and separate.
  dealers will change the front axle steering stops to prevent interference in the tie rod ball socket assembly and steering components will be replaced free of charge. The recall began on july 8, 2008, and will be mailed in phases through december 31, 2008. Owners may contact freightliner at 1-800-547-0712.
  freightliner recall no. Fl-513. Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 88408 [USA]: The potential exists for the flame to spread resulting in possible personal injury.
  On certain trucks, a manufacturing error in the fuel-water separator preheater thermoswitch may prevent the fuel preheater from turning off if the ignition is left on. If the ignition switch is left on when fuel is added to the fuel- water separator at the factory or during a filter element change, a small flame may occur inside the filter cover.
  dealers will inspect the fuel filter date code and thermoswitch lot code to determine if they contain the suspect component free of charge. The recall began on october 4, 2007. Owners may contact freightliner at 1-800-547-0712.
  freightliner recall no. Fl-508.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 88537 [USA]: Incorrectly tightened steering arm fasteners may fatigue and fracture which could cause a crash without warning.
  Freightliner is recalling certain school bus chassis, heavy trucks, van chassis, rv motorhome chassis manufactured from january 5 to may 17, 2007, equipped with axle alliance company (aac) front axles. During the front axle assembly, the fasteners that attach the steering arm or tie rod arms to the spindle may be over or under tightened.
  thomas built will notify owners, inspect the fasteners, and replace the steering arm if necessary. The recall began on december 21, 2007. Owners can contact freightliner at 1-800-547-0712.
  freightliner recall no. Fl-501.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 89080 [USA]: These conditions could either result in leakage and cause a delay in the application of the spring brake without warning or possibly lead to unintended vehicle rollaway or brake drag which could result in a vehicle crash, personal injury, or death.
  Certain freightliner school bus chassis, heavy trucks, and thomas built school buses manufactured between july 2002 and july 3, 2007, equipped with bendix sr-7 spring brake control valves. The parker scv brass 90 degree single check valves (scv) which attach to the supply port of a bendix sr-7 spring brake modulating valve can break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. Also, due to a manufacturing defect in the internal rubber check valve inside the sr-7 spring brake modulating valves, the valves can become deformed and not seat properly.
  freightliner will notify owners and repair the vehicles free of charge. The recall began on january 11, 2008 to freightliner, sterling, and freightliner custom chassis owners; to thomas built bus owners on february 1, 2008. Owners can contact freightliner at 1-800-547-0712.
  freightliner recall no. Fl-504.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 38848 [USA]: The vehicle may rollaway without warning, possibly causing personal injury.
  Certain heavy trucks, shuttle buses, and school buses equipped with bendix modulated spring brake valves. A defect in the modulated spring brake valve casting may cause an intermittent delay in the application of the park brake.
  freightliner will notify owners and replace the defective valves free of charge. The recall began on june 28, 2006 to freightliner, sterling, and fccc owners. Thomas built mailed letters to owners beginning july 27, 2006. This recall has been superseded (replaced) by recall 07v302 (fl-504).
  freightliner recall no. Fl-477.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 2020158 [Canada]: Lights and instruments
  Issue: on certain trucks equipped with "fleet engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety risk: reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective actions: daimler trucks of north america (dtna) will notify owners by mail and instruct you to take your truck to an authorized dtna service facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.

  Show Content

• Recall 2008078 [Canada]: Fuel supply
  On certain trucks, the high-pressure fuel line at each injector may fatigue and fracture if a fastener at the end of the line is not properly connected. This would allow high pressure atomized diesel fuel to enter the engine compartment, creating a risk of fire, which could result in property damage, personal injury, or death. Correction: dealers will affect repairs.

  Show Content

• Recall 2007229 [Canada]: Steering
  On certain vehicles, the fasteners that attach the steering arm or tie rod arm to the spindle may have been over or under tightened during assembly process. Incorrectly torqued steering arm fasteners may fatigue and fracture, possibly causing a crash without warning. Correction: dealers will inspect fasteners and apply correct tightening torque.

  Show Content

• Recall 2007231 [Canada]: Brakes
  On certain vehicles, the internal rubber check valve inside the bendix sr-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: dealers will install a check valve repair kit.

  Show Content

• Recall 2007251 [Canada]: Fuel supply
  On certain trucks, when the ignition key is in the 'on' position, the pre-heater, located in the fuel filter base, is energized. If this pre-heater is energized while maintenance is being performed on the fuel filter, diesel fuel could ignite within the filter housing. A fire within the fuel filter housing may spread possibly resulting in property damage or personal injury. Correction: dealers will inspect and, if required, replace the fuel heater assembly.

  Show Content

• Recall 2007359 [Canada]: Other
  On certain trucks, the fifth wheel hitch assembly's lever arm may have been incorrectly installed during the manufacturing process. The lever arm pivot bolt may have been over-tightened which could distort the pivot bolt spacer sleeve and prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. This could allow the towed unit to separate from the towing vehicle while underway, potentially causing a crash with injury or death. Correction: dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer.

  Show Content

• Recall 2007229 [Canada]: Steering
  On certain vehicles, the fasteners that attach the steering arm or tie rod arm to the spindle may have been over or under tightened during assembly process. Incorrectly torqued steering arm fasteners may fatigue and fracture, possibly causing a crash without warning. Correction: dealers will inspect fasteners and apply correct tightening torque.

  Show Content

• Recall 2007231 [Canada]: Brakes
  On certain vehicles, the internal rubber check valve inside the bendix sr-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: dealers will install a check valve repair kit.

  Show Content

• Recall 2007251 [Canada]: Fuel supply
  On certain trucks, when the ignition key is in the 'on' position, the pre-heater, located in the fuel filter base, is energized. If this pre-heater is energized while maintenance is being performed on the fuel filter, diesel fuel could ignite within the filter housing. A fire within the fuel filter housing may spread possibly resulting in property damage or personal injury. Correction: dealers will inspect and, if required, replace the fuel heater assembly.

  Show Content

• Recall 2007279 [Canada]: Steering
  On certain trucks, the driver's side inner tie rod may be damaged while the truck is executing a sharp turn. Excessive tie rod angles may loosen the tie rod ball socket and/or damage the threaded tie rod attachment to the steering rack. As a result, the tie rod assembly may fail, possibly causing a loss of vehicle control and a crash. Correction: dealers will replace the front axle steering stops to limit turning radius and prevent interference with the tie rod assembly.

  Show Content

• Recall 2007359 [Canada]: Other
  On certain trucks, the fifth wheel hitch assembly's lever arm may have been incorrectly installed during the manufacturing process. The lever arm pivot bolt may have been over-tightened which could distort the pivot bolt spacer sleeve and prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. This could allow the towed unit to separate from the towing vehicle while underway, potentially causing a crash with injury or death. Correction: dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Insecure fifth wheel latching investigation # PE07047

  On november 19, 2007, freightliner filed defect report 07v-530 which outlines a safety recall program to notify the affected owners and correct the affected vehicles.
  

  Show Content

Tl-2007 freightliner (model unknown). The rear door handle has oxidation with the aluminum on the steel. When attempting to open the door the handle falls off in one piece into your hand. When this occurs there is no way to open the rear door from the outside. The current mileage was 34,000. The mileage at the time of failure was 22,000.

Common OBD-II Error Codes

• B2080 [1] B2080