2021 Genesis G80Genesis G80 2021

Complaint Information: Recalls, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls

  • Recall 238020 [USA]: A loss of drive power can increase the risk of a crash.
    Hyundai motor america (hyundai) is recalling certain 2021-2022 genesis g80, gv80, and 2022 genesis gv70 vehicles. The fuel pump may fail, which can result in a loss of drive power.
    dealers will replace the fuel pump, free of charge. Owner notification letters were mailed november 8, 2023. Owners may contact hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 016g.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

  • Recall 237713 [USA]: An exploding seat belt pretensioner can project metal fragments into the vehicle, strike vehicle occupants, and result in injury.
    Hyundai motor america (hyundai) is recalling certain 2020-2023 genesis gv80, 2021-2023 genesis g80, 2022-2023 genesis gv70, and 2023 genesis gv60 vehicles. In the event of a crash, the front driver-side and/or passenger-side seat belt pretensioners may explode upon deployment.
    dealers will secure the seat belt pretensioners with a cap, free of charge. Owner notification letters were mailed april 14, 2023. For gv60 owners, interim notification letters, notifying owners of the safety risk, were mailed april 14, 2023. A second notice will be sent once the final remedy is available. Owners may contact hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 012g. This recall supersedes and expands recall number 21v-796. Vehicles previously repaired under recall 21v-796 will need to have the new remedy completed.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

  • Recall 206244 [USA]: A fuel leak in the presence of an ignition source can increase the risk of a fire.
    Hyundai motor america (hyundai) is recalling certain 2021 genesis g80 and gv80 vehicles equipped with 2.5-litre turbo engines. The fuel tube connecting the high pressure fuel pump to the fuel rail may not seal properly, which could allow fuel to leak.
    hyundai will notify owners, and dealers will replace the high pressure fuel tube, free of charge. Owner notification letters were mailed on may 24, 2021. Owners may contact hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 008g.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 22-FL-001G - FUEL SYSTEM, GASOLINE: This bulletin provides information related to the ecm(engine control module) software update for 3.5l gdi engine equipped vehicles that experience check engine light, no drivability issue, and with either of the following dtc found stored i
  • 21-BD-001G - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Genesis applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can bec
  • 21-AT-015G - POWER TRAIN: This tsb provides a procedure to diagnose and repair a transmission for the following incorrect ratio dtc (transmission clutch slipping more than 200 rpm in gear).
  • 19-AT-014G - POWER TRAIN:AUTOMATIC TRANSMISSION: This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
  • 19-AT-007G - POWER TRAIN:AUTOMATIC TRANSMISSION: This bulletin provides a procedure to transfer oil pressure data to the tcu using gds mobile. This procedure is necessary to reduce the tcu learning time and improve the shift quality. I?? Before replacing an automatic transmission: input t
  • 21-AT-012G - POWER TRAIN:AUTOMATIC TRANSMISSION: This bulletin provides a procedure to transfer oil pressure data to the tcu using gds mobile. This procedure is necessary to reduce the tcu learning time and improve the shift quality. I?? Before replacing an automatic transmission (pages
  • 19-BE-017G - VISIBILITY:REARVIEW MIRRORS/DEVICES: Certain vehicles (listed below) equipped with the homelink5 (two way communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible
  • 19-AT-023G - POWER TRAIN:AUTOMATIC TRANSMISSION: If you are servicing a vehicle with a transmission slipping concern, follow the service procedure shown below and perform a stall test. This tsb provides a procedure to test each clutch in the transmission. If the vehicle fails the stall te
  • 19-AT-012G - POWER TRAIN:AUTOMATIC TRANSMISSION: This tsb provides a procedure to diagnose and repair a transaxle for the following incorrect ratio dtc (transaxle clutch slipping more than 200 rpm in gear).
  • 19-AT-008G - POWER TRAIN:AUTOMATIC TRANSMISSION: When servicing a vehicle with a a??Check engine lighta?? And any of the dtcs listed below, follow the service procedure to replace the related solenoid and e-module or park position switch.
  • 22-01-009G - ELECTRICAL SYSTEM: This bulletin describes the procedure to replace the amp ground side coil and coil and capacitor for certain vehicles exhibiting brown foam discoloration of the sponge pad in the rear glass antenna.
  • 21-01-058G - ENGINE AND ENGINE COOLING: Certain 2021my genesis g80 (rg3) vehicles may have coolant leakage from the radiator reservoir tank. Follow the procedure outlined in this bulletin to inspect the radiator reservoir tank, and if necessary, replace it with a new part.
  • 21-01-029G-2 - EXTERIOR LIGHTING:HEADLIGHTS: This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 my genesis g80 (rg3) vehicles equipped with light emitting diode (led) headlamps. The adjustment can help improve headlamp focus and red
  • 21-01-029G-1 - EXTERIOR LIGHTING:HEADLIGHTS: This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 my genesis g80 (rg3) vehicles equipped with light emitting diode (led) headlamps. The adjustment can help improve headlamp focus and red
  • 21-01-029G - EXTERIOR LIGHTING:HEADLIGHTS: This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 my genesis g80 (rg3) vehicles equipped with light emitting diode (led) headlamps. The adjustment can help improve headlamp focus and red
  • 23-DS-004G-1 - POWER TRAIN: Certain gv70 (jk1 and jk1a), gv80 (jx1) and g80 (rg3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for nois
  • 23-EE-013G - ELECTRICAL SYSTEM: This bulletin is issued to provide the extended battery diagnosis procedure using gds. This battery diagnosis function displays the various battery-related faults such as: a?? Internal short circuit a?? Battery deterioration a?? Malfunct
  • 23-DS-004G-1 - SUSPENSION: Certain gv70 (jk1 and jk1a), gv80 (jx1) and g80 (rg3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for nois
  • 23-ST-004G-1 - STEERING: This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain genesis vehicles.
  • 23-DS-004G - SUSPENSION: Certain gv70 (jk1 and jk1a), gv80 (jx1) and g80 (rg3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for nois
  • 23-BD-014G - VISIBILITY:SUN/MOON ROOF ASSEMBLY: This bulletin provides instructions on how to service the panoramic sunroof on certain g80 (rg3) vehicles that experience creaking or rattling noises while driving on uneven roads.
  • 23-BD-013G - STRUCTURE: This bulletin provides information to address difficultly with opening of the center console armrest storage on certain g80 (rg3) vehicles. The foam pad attached to the release button may interfere with its normal opening function. Follow t
  • 23-AT-007G - POWER TRAIN: When servicing an 8-speed automatic transmission vehicle with a a??Check engine lighta?? And any of the dtcs listed below, follow the service procedure and, if necessary, replace the e-module.
  • 23-BD-007H - STRUCTURE:BODY: Hyundai applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can becom
  • 23-ST-004G - STEERING: This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain genesis vehicles.
  • 23-AT-001G - ENGINE AND ENGINE COOLING: When servicing a vehicle with a a??Check engine lighta?? And any of the dtcs listed below, follow the service procedure to replace the related solenoid and e-module or park position switch.
  • 23-BD-002G - VISIBILITY: This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. This tsb illustrates the various causes of condensation inside th
  • 22-01-060G - ENGINE AND ENGINE COOLING: Certain 2021-2022my genesis g80 (rg3) vehicles may have coolant leakage from the radiator reservoir tank. Follow the procedure outlined in this bulletin to inspect the radiator reservoir tank, and if necessary, replace it with a new par
  • 21-EM-004H - EQUIPMENT: This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the bearing clearance test inspection requirements to determine next required steps

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.