2020 PETERBILT 389Peterbilt 389 2020

Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2020 PETERBILT 389, manufacturered by Peterbilt Motors Company.
The vehicle is described as a 6x4 Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.).

ManufacturerKnown WMI(s)Fuel Type
PETERBILT1XP 2NP 3BP Diesel
PETERBILT VIN Decoder

Use the box here to look up VINs from PETERBILT as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2020 PETERBILT 389 produced?
     - The 2020 PETERBILT 389 is produced in Denton Texas, United States (usa).
  • Are there recalls for the 2020 PETERBILT 389?
     - There are 10 recall(s) for the 2020 PETERBILT 389, additional information is below.
  • What is the GVWR of a 2020 PETERBILT 389?
     - The 2020 PETERBILT 389 has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
NHTSA Mandated Recalls
  • Recall 189088 [USA]: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.

  • Recall 210903 [USA]: Unintended vehicle movement can increase the risk of a crash or injury.

  • Recall 156734 [USA]: The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.

  • Recall 148245 [USA]: An electrical short circuit can increase the risk of a fire.

  • Recall 151013 [USA]: If the rear axle output shaft fractures, the shaft or interaxle driveline could detach and become a road hazard, increasing the risk of a crash.

  • Recall 2021287 [Canada]: Lights and instruments

  • Recall 2020399 [Canada]: Suspension

  • Recall 2020090 [Canada]: Electrical

  • Recall 2019650 [Canada]: Powertrain

  • Recall 2022210 [Canada]: Steering

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • E273 - ENGINE AND ENGINE COOLING: Fix as fail updated: two part numbers added: 1818119 dpf delta pressure sensors for mx-13-2 emy18 2200138 dpf delta pressure sensors for mx-13 -2, emy19 per environment and climate change canada (eccc) regulations and guidance (canadi
  • 32-019 - STRUCTURE: Fix as fail a?? Chassis that were manufactured with certain battery cable routing brackets may experience rubbing or chafing of the battery cables.
  • 01-082 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:CONDENSOR/EVAPORATOR: Certain model 389 chassis are experiencing freezing of the a/c evaporator or frosting of the compressor and suction line. A field resolution is available to solve this issue.
  • 34-093 - ELECTRICAL SYSTEM: 34-093 model 389 78-inch sleeper 12v power port supplier change
  • 23-005 - VEHICLE SPEED CONTROL: Clutch pedal linkage lubrication service interval information is missing from the service manual for model 365, 367, and 389 chassis.
  • 45-064 - ENGINE AND ENGINE COOLING: Info only - paccar is introducing over-the-air (ota) software updates for engine my17 and newer chassis equipped with cummins x15, x12, isx12, isx12n, l9n, px-7, and px-9 engines the technology will leverage the existing remote diagnostic c
  • 14-043 - SUSPENSION: Fix-as-fail on certain chassis with low air leaf suspension or low-low air leaf suspension, the height control valve (hcv) arm may be rubbing on other components when the bend in the arm is facing outboard. Flipping the bend in the hcv arm
  • 13-060 - BRAKES (PWS): The service information for bendix air dryer maintenance is being updated to include new procedures.
  • 56-005 - ENGINE AND ENGINE COOLING: During pto mode, the engine will not ramp up to the set rpm speed.
  • 13-057 - EQUIPMENT ADAPTIVE/MOBILITY: Fix-as-faila a?? A hill start assist (hsa) valve plumbing revision eliminates ice buildup in the hsa valve exhaust in cold weather.A
  • 51-013 - EQUIPMENT: Due to major data carriers phasing out 3g networks, chassis currently utilizing first generation peoplenet mobile gateway (pmg001) will experience severe 3g service degradation as early as january of 2022. Chassis currently utilizing 3g ant
  • 34-090 - EQUIPMENT: A frame mounted left-hand marker light bracket interferes with the rear fuel tank fill location. A redesigned bracket can be purchased that relocates the marker bracket to the front fuel tank bracket to eliminate interference.
  • R2103 - ENGINE AND ENGINE COOLING: Retrofit - the emissions exemption will be expiring on 5/15/2022 for certain pre-production vehicles equipped with paccar mx-11 and mx-13 epa 2021 emissions engines. Production-level components are now available to make these vehicles compl
  • 21PBM - SERVICE BRAKES, HYDRAULIC: â¿¿safety recall â¿¿ work brake may unintentionally disengage â¿¿ nhtsa id: 21v906, tc: 2021-713. The work brake (also known as winch brake) may unintentionally disengage during winching operations, releasing the service brakes, in
  • 43-071 - FUEL SYSTEM, DIESEL: Fix-as-fail a?? Due to undersupply issues, only a limited supply of diesel exhaust fluid (def) sensors are available. As a temporary solution, after paccar confirms a def sensor is not available, a temporary software update will allow a veh
  • 02-168 - STRUCTURE: Information only - rear axle quarter fenders with less than two inches of clearance between the top of the quarter fender and the bottom of the trailer/equipment are susceptible to damage. The lack of clearance could result in cracked/broke
  • 21 PBJ - EXTERIOR LIGHTING: ⿿safety recall ⿿ hill start assist (hsa) valve clearance ⿿ nhtsa id: 21v-648, tc: 2021-521. Crossmember mounted hill start assist valve may not have sufficient clearance to the rear axle, resulting in hose or fitting damage. Damage
  • 52-004 - ELECTRICAL SYSTEM:ADAS:BLINDSPOT:SOFTWARE: Fix-as-fail: radio does not mute when truck with auto trans is placed in reverse. Software flash resolves issue.
  • 21-PBF - EXTERIOR LIGHTING: Safety recall a?? Interim notification - the daytime running lamps (drls) may turn off while the vehicle is in motion and the headlamps, fog lamps or turn signals are not on. This is non-compliant with canadian regulation cmvss 108, which s
  • 21PBB - EQUIPMENT: Safety campaign - cummins engine flywheel capscrews improperly torqued. Cummins recall C2402.
  • 02-160 - VISIBILITY:WINDSHIELD WIPER/WASHER: Information only a?? Windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 116-1 - EQUIPMENT: Smartnav 2.0 hardware retrofit for quality validation and vehicle validation units.
  • 13-055 - EQUIPMENT ADAPTIVE/MOBILITY: Fix as fail: peterbilt has introduced an improved mounting bracket for low mount air tanks for vehicles built between january 01, 2017 and july 06, 2020. Torsional vibration may stress the currently-installed brackets and cause them to fai
  • 20PBE - POWER TRAIN: Safety recall: peterbilt has decided that a condition could exist in certain model 348, 365, 367, 389, 520, and 567 vehicles built between 11/19/2019 and 4/09/2020. Vehicles equipped with watson & chalin sl2065 lift axles may have lower re
  • 14-027 - STRUCTURE: Information only: in 2020, peterbilt and kenworth began using the same m10, m12, m16, and m20 frame fasteners on all vehicles. Torque specifications for these fasteners are different from previous fasteners.
  • 02-158 - STRUCTURE: Fix as fail: peterbilt has determined that certain model 348, 365, 367, 382, 384, 386, 388, 389, 567, 579, and 587 trucks, built between 4/13/2010 and 3/16/2020 and equipped with a flush mounted battery box, utilized rubber washers that co
  • 13-054 - BRAKES (PWS): Fix-as-fail - bendix new-gen lightweight steer axle drum brake spider cracking
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 43-067 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (⿿soc⿝) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
  • 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
  • 20PBA - EQUIPMENT ADAPTIVE/MOBILITY: "safety recall: nhtsa recall number is 20v130. A defect, which relates to motor vehicle safety, may exist in certain model 365, 389, 567, and 579 vehicles manufactured between april 18, 2014 and march 09, 2020 with a left-hand under hood
  • 20PBA - ELECTRICAL SYSTEM: Safety recall interim bulletin: peterbilt has decided that a defect, which relates to motor vehicle safety, may exist in certain model 365, 389, 567, and 579 vehicles manufactured between april 18, 2014 and september 30, 2019 with a left-ha
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
  • 19PBG - POWER TRAIN: Safety recall: peterbilt motors company has determined that a defect, which relates to motor vehicle safety, may exist in certain model 348, 367, 389, 520 or 567 vehicles manufactured between november 22, 2019 and december 5, 2019. Output
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • 16-041 - SUSPENSION: Non safety campaign: peterbilt has determined that certain model 365, 384, 386, 388, 389, 3895, 587 and 579 vehicles built between march 27, 2012 and january 20, 2019 with flex air suspension in a 6x2 configuration have u-bolts that may fa
  • 15-028 - STEERING:COLUMN: Non safety campaign: peterbilt has determined that certain model 365, 367, and 389 vehicles, built between 08/09/19 and 08/20/19 may have a steering column tilt cable that is not properly routed through a cushion clamp. This can result in
NHTSA decoded information from VIN

138 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Body ClassTruck
Brake System TypeAir
DisplacementCC15000
DisplacementCI915.3561614209
DisplacementL15
Drive Type6x4
Engine ConfigurationIn-Line
Engine Cylinders6
Engine ModelCummins ISX
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryDiesel
GVWRClass 8: 33,001 lb and above (14,969 kg and above)
MakePETERBILT
MakeID495
ManufacturerPETERBILT MOTORS COMPANY
Manufacturer Id1033
Model389
ModelID2794
Model Year2020
NCSA Body TypeSingle-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.)
NCSA MakePeterbilt
NCSA ModelMedium/Heavy - CBE
Plant CityDENTON
Plant Company NamePeterbilt
Plant CountryUNITED STATES (USA)
Plant StateTEXAS
VIN1NPXL40X7LD732559
Vehicle TypeINCOMPLETE VEHICLE
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
1NPXL40X7LD7325592020389DENTON TEXAS, UNITED STATES (USA)
1NPXLP9X7LD6692902020389DENTON TEXAS, UNITED STATES (USA)
1XPXDP9X8LD6874592020389DENTON TEXAS, UNITED STATES (USA)
1NPXL49X9LD6539152020389DENTON TEXAS, UNITED STATES (USA)
1XPXP4EXXLD6477182020389DENTON TEXAS, UNITED STATES (USA)
1XPXD49X9LD1708132020389DENTON TEXAS, UNITED STATES (USA)
1XPXD40X4LD7236302020389DENTON TEXAS, UNITED STATES (USA)
1XPXDP9X6LD6368202020389DENTON TEXAS, UNITED STATES (USA)
1XPXDP9X3LD7062082020389DENTON TEXAS, UNITED STATES (USA)
1NPXL49X1LD6539112020389DENTON TEXAS, UNITED STATES (USA)
2XPXD49X4LD7191752020389DENTON TEXAS, UNITED STATES (USA)
1XPXD49X3LD6419112020389DENTON TEXAS, UNITED STATES (USA)
1NPXLP9X5L06612702020389 ,
1XPXDP9X3LD6751402020389DENTON TEXAS, UNITED STATES (USA)
1NPXLP9X7LD6771292020389DENTON TEXAS, UNITED STATES (USA)
1XPXD40X1LD7153552020389DENTON TEXAS, UNITED STATES (USA)
1NPXLP9X6LD7169862020389DENTON TEXAS, UNITED STATES (USA)
1XPXDP9X7LD6653412020389DENTON TEXAS, UNITED STATES (USA)
2XPXD40X6LM6597772020389MONTREAL QUEBEC, CANADA
1XPXD49X7LD7151052020389DENTON TEXAS, UNITED STATES (USA)
1NPXLP9X5LD6837852020389DENTON TEXAS, UNITED STATES (USA)
1XPXD40X7LD6926162020389DENTON TEXAS, UNITED STATES (USA)
1XPXD49X0LD6291202020389DENTON TEXAS, UNITED STATES (USA)
1XPXD49X7LD6561052020389DENTON TEXAS, UNITED STATES (USA)

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.