01-168-09R
Service Bulletin Details
Public Details for: 01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the subaru lock information web-site.
- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 -
Models from 2017
Models from 2016
Models from 2015
Models from 2014
Models from 2013
2013 SUBARU BRZ |
2013 SUBARU CROSSTREK |
2013 SUBARU FORESTER |
2013 SUBARU IMPREZA |
2013 SUBARU LEGACY |
2013 SUBARU OUTBACK |
2013 SUBARU TRIBECA |
2013 SUBARU WRX |
2013 SUBARU WRX STI |
2013 SUBARU XV CROSSTREK |
Models from 2012
Models from 2011
2011 SUBARU B9 TRIBECA |
2011 SUBARU FORESTER |
2011 SUBARU IMPREZA |
2011 SUBARU LEGACY |
2011 SUBARU OUTBACK |
2011 SUBARU TRIBECA |
2011 SUBARU WRX |
2011 SUBARU WRX STI |
Models from 2010
2010 SUBARU B9 TRIBECA |
2010 SUBARU FORESTER |
2010 SUBARU IMPREZA |
2010 SUBARU LEGACY |
2010 SUBARU OUTBACK |
2010 SUBARU TRIBECA |
2010 SUBARU WRX |
2010 SUBARU WRX STI |
Models from 2009
Models from 2008
Models from 2007
2007 SUBARU B9 TRIBECA |
2007 SUBARU FORESTER |
2007 SUBARU IMPREZA |
2007 SUBARU LEGACY |
2007 SUBARU OUTBACK |
2007 SUBARU TRIBECA |
Models from 2006
2006 SUBARU B9 TRIBECA |
2006 SUBARU BAJA |
2006 SUBARU FORESTER |
2006 SUBARU IMPREZA |
2006 SUBARU LEGACY |
2006 SUBARU OUTBACK |
2006 SUBARU OUTBACK SPORT |
2006 SUBARU TRIBECA |
2006 SUBARU WRX |
Models from 2005
2005 SUBARU BAJA |
2005 SUBARU FORESTER |
2005 SUBARU IMPREZA |
2005 SUBARU LEGACY |
2005 SUBARU OUTBACK |
2005 SUBARU WRX |
2005 SUBARU WRX STI |
Models from 2004
2004 SUBARU BAJA |
2004 SUBARU FORESTER |
2004 SUBARU IMPREZA |
2004 SUBARU LEGACY |
2004 SUBARU OUTBACK |
2004 SUBARU WRX |
2004 SUBARU WRX STI |
Models from 2003
2003 SUBARU BAJA |
2003 SUBARU FORESTER |
2003 SUBARU IMPREZA |
2003 SUBARU LEGACY |
2003 SUBARU OUTBACK |
2003 SUBARU WAGON |
2003 SUBARU WRX |
Models from 2002
2002 SUBARU FORESTER |
2002 SUBARU IMPREZA |
2002 SUBARU LEGACY |
2002 SUBARU OUTBACK |
2002 SUBARU WAGON |
2002 SUBARU WRX |
ATTENTION: CLAIMS PERSONNEL q IMPORTANT - All Service Personnel Should Read and Initial in the boxes provided, right. SERVICE MANAGER © 2016 Subaru of America, Inc. All rights reserved. GENERAL MANAGER q PARTS MANAGER q q SERVICE BULLETIN APPLICABILITY: 2000MY to Current, All Models SUBJECT: Replacement Key and Immobilizer Information NUMBER: DATE: Revised: 01-168-09R 06/17/09 11/16/16 INTRODUCTION The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. OVERVIEW OF THE RETAILER-ONLY SUBARU LOCK INFORMATION SITE The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin identifies the equipment required to initialize (reset) the immobilizer code and cut the key blanks, for both immobilizer and non-immobilizer type keys. Subaru of America began using immobilizer systems in some 2005MY vehicles (please refer to Immobilizer Chart for more detailed information). KEY BLANK TYPES Subaru vehicles are equipped with either standard edge cut keys or high security laser cut keys. All high security keys are equipped with an immobilizer device installed. Some standard edge cut keys may or may not be equipped with an immobilizer device. Key blanks can be purchased through normal parts channels. The following page are examples of the Subaru key blank styles: There are many different styles of key cuts. Be sure to order the correct blank for your particular application and verify your key cutting equipment is compatible. Master keys are shown below. 2005-2007 Legacy & Outback edge cut key w/immobilizer (also available without immobilizer) 2008-2011 Impreza, WRX, & STI and 2012-2014 WRX & STI high security laser cut key w/immobilizer continued... CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Bulletin Number: 01-168-09R; Revised: 11/16/16 SUBARU OF AMERICA, INC. IS ISO 14001 COMPLIANT ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Page 1 2008 Legacy, Outback, and Tribeca edge cut key w/immobilizer and keyless entry 2009-2013 Forester high security laser cut key w/immobilizer 2009 Legacy & Outback and 2009-2014 edge cut key w/immobilizer and keyless entry 2010-2014 Legacy & Outback high security standard laser cut key w/immobilizer and keyless entry 2012+ Impreza, 2013+ Crosstrek and 2014+ Forester, 2015+ Legacy & Outback, and 2015+ WRX & STI edge cut key w/immobilizer and keyless entry 2013+ BRZ edge cut key w/immobilizer and keyless entry continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 2 2013-2014 BRZ keyless access with pushbutton start system access key with inside cut high security laser cut emergency key, immobilizer, and keyless entry 2013-2014 Legacy & Outback keyless access with push-button start system access key with high security laser cut emergency key, immobilizer, and keyless entry 2014-2015 Forester, 2014 Crosstrek Hybrid, and 2015 WRX & STI keyless access with push-button start system access key with inside cut high security laser cut emergency key, immobilizer, and keyless entry. (Different part number and key cutting code from 2013 BRZ.) 2015+ BRZ, 2015+ Legacy, Outback, Impreza, Crosstrek and 2016+ WRX, WRX STI and Forester keyless access with push button start system access key with singlesided inside cut high security laser cut emergency key, immobilizer, and keyless entry. continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 3 SUBARU VEHICLES EQUIPPED WITH ENGINE IMMOBILIZER SYSTEM 2005 2006 2007 2008 > 2009 Baja Forester Impreza Legacy Outback Tribeca BRZ Crosstrek n/a n/a ---- 2.5XT 2.5XT 2.5XT 2.5XT All STi WRX, STi WRX, STi All All 2.5GT All All All All 2.5XT, 3.0R All All All All -All All All All ----All ----All WEB SITE ACCESS: AUTOMOTIVE SECURITY PROFESSIONALS The public-facing locksmith site (linked off of STIS, via the “Immobilizer Key Access” button), is a pay site for lock professionals. WEB SITE ACCESS: AUTHORIZED SUBARU RETAILERS Authorized Subaru Retailers can access SLIS through Subarunet (under the Service tab, or by directly following the URL http://lockinfo.subaru.com. Access to the immobilizer information is restricted to Subaru Dealership Service Managers and Parts Managers. Access will be granted by using the managers’ SKILS user name. No other employees can access the Subaru Immobilizer Database. Note: It is the retailers’ responsibility to perform due diligence by entering or deleting employees in the SKILS Dealer Employee Maintenance Database. This is especially true of Service Manager and Parts Manager position changes. Step by Step Process To Access the Site • Once on the SLIS home page, the Service Manager or Parts Manager will be asked for their SKILS user name. At that time, if this is the first time he/she has logged on to the web site, the password “Welcome” should be used. He/she will then be prompted to create a new password (this will not change your current SKILS password). • The Service Manager or Parts Manager will then be prompted to read the disclaimer and answer “accept” or “not accept”. If they answer “not accept”, the system will not let them access the immobilizer information. • A page will then be displayed, allowing for entry of the full 17 character VIN of the vehicle in question. • Provided the VIN is found in the database, the immobilizer Security ID along with the key/ cutting code will appear. • A charge of $2.80 will be incurred for each immobilizer request. Note: Costs are $9.95 per transaction, or $25.95 for a 24 hour subscription access (with no transaction limit). SOA Warranty will only reimburse an approved warranty claim with an Immobilizer Code access cost of $2.80 per transaction, as a sublet cost. The public-facing (professional locksmith) web site’s public access fees of $9.95 and $25.95 will be reduced to $2.80 per transaction, if those fees are submitted as a part of a warranty claim. continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 4 NASTF SECURE DATA RELEASE MODEL (SDRM) Positive Identification Policy NASTF SDRM Subaru Parts and Service Managers who are registered in the Dealer Employee Maintenance Database and are designated as Registry Vehicle Security Professionals (VSPs) shall comply with the following Positive Identification Policy when servicing orders for keys, immobilizer reset, or other anti-theft services for vehicles: 1. Inform the Customer - At the time of initial request, ask the customer whether he or she has identification and authority for the service. Inform them of the requirements of this Positive Identification Policy. 2. Complete the Form - Upon arrival at the job site or when the customer comes in, the VSP shall complete an Authorization for Automotive Key Generation and/or Immobilizer System / Anti-Theft Services form (aka Form D-1, page 15) that asks for the name, address, phone number, driver’s license, vehicle make, model and year, vehicle license plate number, Vehicle Identification Number (VIN), odometer reading, and disclaimer and signature. An invoice or work order that contains all identifying information, when stapled to a duly signed Form D-1, is acceptable for collection of this customer information. Subarunet.com user name should be used in place of LSID. 3. Verify I.D. - Verify the customer’s valid photo ID and compare to the information provided by the customer on the authorization form. The customer must present a valid state issued driver’s license as proof of identity to qualify for use of Registry services. 4. Verify Authority - Ask the customer to present proof of entitlement, which shall include at least one of the following: a valid registration certificate, a valid insurance ID card, a valid insurance policy, vehicle title or a certificate of ownership for the vehicle. The name and address on the proof of entitlement document must match the information on the driver’s license to qualify for use of Registry services. In the event that necessary documentation is locked within the vehicle, the vehicle may be entered to verify the authority of the requestor. If upon entry to the vehicle, you are unable to verify the authority of the requestor, the vehicle shall be shut and locked. Do not produce a replacement key, do not provide any key related information to the requestor and destroy all information acquired from the automaker during the transaction. 5. Ask for Signature - Require the customer to read and sign Form D-1(page 15). The customer is attesting to: a. the information given by the customer being correct and truthful, b. the customer having the authority to obtain keys or immobilizer services for the vehicle and, c. the customer agreeing to indemnify and hold harmless the service provider and related parties against liability. 6. File the Form - Keep the completed Form D-1 on file for two (2) years, or longer as required by law. 7. Compliance with Applicable Laws. The VSP will take all other actions required by applicable laws. In the event of a conflict between the steps set forth herein and the applicable laws, the VSP should comply with applicable laws. 8. Sublet work - A mobile VSP doing work for a body shop, garage, or dealership may accept a legible photocopy of the picture I.D. in order to match it to the registration/title documents. This cannot be a faxed copy. The shop owner or manager must verify the customer’s I.D. in person and attest they have done so by signing the bottom of the Form D-1 continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 5 EQUIPMENT The Subaru Diagnostic System (SDS) is required to reprogram Subaru immobilizer codes. See the Subaru Technical Information System (STIS) (http://techinfo.subaru.com) for more information. Instructions for Immobilizer re-initialization for keys, etc., can be found in the applicable Immobilizer Manual on STIS. TEACHING OPERATION CODES A Teaching Operation Code may be needed. The following are the necessary Teaching Codes: VEHICLE LINE Legacy Impreza Forester Tribeca MODEL YEAR 2005-2014 2005~07 2008-2011 2005~08 2009-2013 2006-2014 TEACHING CODE 3781 3178 3781 3178 3781 3781 KEY CUTTING MACHINERY RECOMMENDATIONS Subaru of America recommends the use of the Class C Solutions Group “BD Laser Max” key cutting machine for standard edge cut and high security laser cut keys. Consult http://subaru.service-solutions.com for key machine purchases. BD Laser Max RETAILER CENTRALIZED KEY CUTTING SERVICE The Subaru of America Parts Department offers a key cutting service for retailers who have not purchased the key cutting machine. The service program details can be found on Subarunet.com, in the Parts Operations area, using the “Key Request” link. Forms, details, and costs are found in this area of Subarunet.com. continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 6 Key Cutting Tips For Using a BD Laser Max Every Subaru vehicle has a key code that can be found on the original key ring tag and on Subarunet. This code is known as an indirect (obfuscated) code. To cut a key, the indirect code must be translated to the direct code which is the actual key cutting depth information. Behind the scenes there is a database for each key type which converts the indirect key codes into the respective direct depth codes required to cut a key. In the past Subaru provided third party companies with this database so they could program their key cutting machines for indirect code cutting. The indirect key code could be typed into the key machine and the key machine would automatically convert the indirect code into the direct depth code and cut the key. For security reasons Subaru is no longer providing this database. The keys for newer Subaru models must be cut using the direct method. The direct code cut depth information for a given key must be obtained through Subaru Lock Information Service (SLIS). The following information will guide you through both indirect and direct depth key cutting methods. Prior to Using Machine 1. Locate model and model year in the Key Type & Cutting Information chart found on the following pages to find the vehicle specific cutting information 2. Note Cut By, Jaw, Cutter Size and Adapter requirement 3. If the Cut By is listed as Code, obtain the key code for the vehicle through Subaru.net or through the SLIS service (listed as Key No in SLIS) 4. If the Cut By is listed as Depth, obtain the Depth Code through the SLIS service (listed as Key Code in SLIS) Machine Tips 1. To limit the selection to US market vehicles, from the Main menu go to Cars and change region to North America 2. Maintain up-to-date software. Software releases prior to March 2016 will not cut all of the keys listed in this bulletin. Refer to attached BD Laser Max instructions for updating software and sign up for software update alerts at https://blueclassc.mscdirect.com/ acton/form/1684/0039:d-0001/0/index.htm 3. When inserting a key blank into the jaw, make sure that the jaw is clear of debris 4. Press down on the blank as you tighten the jaw to ensure that the blank is fully seated Cutting a Subaru Key 1. From the main menu, select CARS 2. Select Subaru 3. Select Subaru model 4. Select the row with the year range and key type 5. If cut by code, select CODES and input the key code 6. If cut by depth, select DIRECT and input the depth code per the input sequence chart 7. Follow the machine prompts to set up the required cutter size and jaw type 8. Follow the machine prompts to set up the tip stop or adapter (if required). For assistance in setting up the tip stop and adapter refer to following pages for more information 9. If application calls for F/G jaw, either a F or G jaw can be used 10. If an original key is available, check that the image of the key cut matches the original key and proceed with cutting the key continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 7 KEY TYPE & CUTTING INFORMATION (Legend for charts on Pages 8-11): Multiple part numbers = Refer to Electronic Parts Catalog for the correct VIN specific part number Sub Master = Master Key without remote keyless entry functions Valet = Door and ignition only. No remote keyless entry functions. Will not unlock glovebox on Forester and Outback, trunk and glovebox on Legacy and 2008-2011 Impreza, and trunk on BRZ Push-Button Start Emergency = Emergency Key for Keyless Access with Push-Button Start Pre-cut available = A pre-cut replacement key can be ordered through the TRMI service Tip Stop Setup for A and C Jaws A and C jaws use an integrated tip stop that slides into place when required Tip Stop Integrated Into Jaw Tip Stop Setup for F/G Jaw F/G jaws use a magnetic tip stop that is placed into the required grooved track Tip Stop In G1 Position Magnetic Tip Stop Adapter (AD03) Setup 4IT 4+4 thin type emergency keys require use of the AD03 adapter that is placed into the jaw as shown prior to inserting the key blank Adapter AD03 continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 8 continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 9 WRX / STI Impreza Model 57497FG080 57497FG090 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - Master 57497AG070 57497AG070 Sub Master Valet 57497FG010 57497FG010 Pre-cut available Yes Yes Cut Type Laser Laser Key Type T0001-3000 4ET 5+5 Key Code Series T0001-3000 T0001-3000 BD Laser Setup Cut By Code Code Jaw A A Cutter Size 2.5 mm 2.5 mm Adapter Required No No Push Button Start Emergency Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required - 2010MY 57497FG080 57497FG090 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 57497FG010 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - Valet Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required Push Button Start Emergency Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required 2009MY 57497AG070 57497FG010 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 2008MY 57497AG070 - Key Type & Cutting Information Master Sub Master Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No - 2012MY 57497FJ021 57497FJ090 57497FG160 57497FG160 57497FG170 57497FG170 Yes Yes Laser Laser 4ET 5+5 4ET 5+5 T0001-3000 T0001-3000 Code Code A A 2.5 mm 2.5 mm No No - 57497FG170 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 2011MY 57497FG160 - 57497FG160 57497FG170 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No - 2013MY 57497FJ021 57497FJ090 57497FG160 57497FG170 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No T0001-3000 - 2014MY 57497FJ021 57497FJ090 / 57497FJ250 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No - 57497FJ021 57497FJ090 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497FJ060 Yes Laser 4IT 5+4 77000 - 78569 Depth A 2.5 mm No Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 2015MY 57497FJ230 57497FJ250 57497FJ230 57497FJ250 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 2016MY 57497FJ230 57497FJ250 57497FJ230 57497FJ250 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL02A Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 2017MY 57497FL00A 57497FL08A continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 10 Crosstrek Forester Model Valet Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required Push Button Start Emergency Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required Master Sub Master Key Type & Cutting Information Master Sub Master Valet Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required Push Button Start Emergency Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required - - 2008MY 2009MY 57497FC000 57497SC010 57497FC030 57497SC020 No Yes Edge Laser 10 4ET 5+5 30001-37850 T0001-3000 Code Code F/G A 1.5 mm 2.5 mm No No - 2010MY 57497SC010 57497SC020 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 2011MY 57497AJ070 57497AJ010 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - - 2012MY 57497AJ070 57497AJ010 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 2014MY 57497FJ021 57497SG000 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497FJ060 Yes Laser 4IT 5+4 77000 - 78569 Depth A 2.5 mm No 2015MY 57497FJ021 57497SG000 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497FJ060 Yes Laser 4IT 5+4 77000 - 78569 Depth C 2.5 mm No 2016MY 57497FJ230 57497SG000 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 2017MY 57497FJ230 57497SG000 Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 57497FJ021 57497FJ230 57497FJ230 57497FJ230 57497FJ090 / 57497FJ250 57497FJ250 57497FJ250 57497FJ250 Yes Yes Yes Yes Yes Edge Edge Edge Edge Edge 10 10 10 10 10 32000 - 39999 32000 - 39999 32000 - 39999 32000 - 39999 32000 - 39999 Depth Depth Depth Depth Depth F/G F/G F/G F/G F/G 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm No No No No No 57497FJ060 57497AL020 57497AL020 57497AL020 Yes Yes Yes Yes Laser Laser Laser Laser 4IT 5+4 4IT 4+4 thin 4IT 4+4 thin 4IT 4+4 thin 77000 - 78569 90000 - 94999 90000 - 94999 90000 - 94999 Depth Depth Depth Depth A C C C 2.5 mm 2.5 mm 2.5 mm 2.5 mm No Yes Yes Yes 57497FJ021 57497FJ090 2013MY 57497AJ070 57497AJ010 Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 11 Outback Legacy Model Key Type & Cutting Information Master Sub Master Valet Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required Push Button Start Emergency Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required Master Sub Master Valet Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required Push Button Start Emergency Pre-cut available Cut Type Key Type Key Code Series BD Laser Setup Cut By Jaw Cutter Size Adapter Required 2008MY 57497AG35A 57497AG12A No Edge 10 30001-37850 Code F/G 1.5 mm No 57497AG35A 57497AG12A No Edge 10 30001-37850 Code F/G 1.5 mm No - 2009MY 57497AG48A 57497AG12A No Edge 10 30001-37850 Code F/G 1.5 mm No 57497AG48A 57497AG12A No Edge 10 30001-37850 Code F/G 1.5 mm No - 2010MY 57497AJ00A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ00A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 2011MY 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 2012MY 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No - 2013MY 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ11A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ11A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 2014MY 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ11A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ10A 57497AJ01A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 57497AJ11A Yes Laser 4ET 5+5 T0001-3000 Code A 2.5 mm No 2015MY 57497AL00A 57497AL01A Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL02A Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 57497AL00A 57497AL01A Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL02A Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 2016MY 57497AL00A 57497AL01A Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL02A Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 57497AL00A 57497AL01A Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL02A Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 2017MY 57497AL00A 57497AL01A Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL02A Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes 57497AL00A 57497AL01A Yes Edge 10 32000 - 39999 Depth F/G 1.5 mm No 57497AL02A Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 12 Tribeca BRZ Model Key Type & Cutting Information 2008MY 2009MY 2010MY 2011MY 2012MY 2013MY 2014MY 2015MY Master 57497CA110 57497CA110 57497CA310 Sub Master 57497CA250 57497CA250 57497CA250 Valet Yes Yes Yes Pre-cut available Edge Edge Edge Cut Type 10 10 10 Key Type 50000 - 69999 50000 - 69999 50000 - 69999 Key Code Series Code Code Code BD Laser Setup Cut By F/G F/G F/G Jaw 1.5 mm 1.5 mm 1.5 mm Cutter Size No No No Adapter Required 57497CA200 57497CA200 57497AL020 Push Button Start Emergency Yes Yes Yes Pre-cut available Laser Laser Laser Cut Type 4IT 5+5 4IT 5+5 4IT 4+4 thin Key Type 40000 - 49999 40000 - 49999 90000 - 94999 Key Code Series Depth Depth Depth BD Laser Setup Cut By C C C Jaw 2.5 mm 2.5 mm 2.5 mm Cutter Size No No Yes Adapter Required Master 57497AG35A 57497AG48A 57497XA12A 57497XA20A 57497XA20A 57497XA20A 57497XA20A Sub Master Valet 57497AG12A 57497AG12A 57497XA13A 57497XA13A 57497XA13A 57497XA13A 57497XA13A Pre-cut available No No No No No No No Cut Type Edge Edge Edge Edge Edge Edge Edge Key Type 10 10 10 10 10 10 10 Key Code Series 30001-37850 30001-37850 30001-37850 30001-37850 30001-37850 30001-37850 30001-37850 Cut By Code Code Code Code Code Code Code Jaw F/G F/G F/G F/G F/G F/G F/G BD Laser Setup Cutter Size 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm Adapter Required No No No No No No No Push Button Start Emergency - 2016MY 57497CA310 57497CA250 Yes Edge 10 50000 - 69999 Code F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes - 2017MY 57497CA310 57497CA250 Yes Edge 10 50000 - 69999 Code F/G 1.5 mm No 57497AL020 Yes Laser 4IT 4+4 thin 90000 - 94999 Depth C 2.5 mm Yes - Depth Code Input Sequence Edge cut key depth code input sequence 2012MY+ Impreza, 2015MY+ WRX/STI 2013MY+ Crosstrek, 2014MY+ Forester, 2015MY+ Legacy, 2015MY+ Outback The machine will automatically populate the second row Depth Code: 1-2-3-4-5-6-7-8-9-10 1 2 3 4 5 6 7 8 9 10 Key Key Blank Blank Emergency key depth code input sequence (4IT 4+4 key) 2015MY+ Impreza, 2016MY+ WRX/STI 2015MY+ Crosstrek, 2016MY+ Forester, 2015MY+ Legacy, 2015MY+ Outback, 2015MY+ BRZ Enter code in reverse order from sequence provided Depth Code: 1-2-3-4-5-6-7-8 8 7 6 5 4 3 2 1 Key Blank Emergency key depth code input sequence (4IT 5+5 key) 2013-14MY BRZ Enter code in reverse order from sequence provided Depth Code: 1-2-3-4-5-6-7-8-9-10 10 9 8 7 6 5 4 3 2 1 Key KeyBlank Blank Emergency key depth code input sequence (4IT 5+4 key) 2015MY WRX/STI, 2014MY Crosstrek, 2014-15MY Forester Enter code in reverse order from sequence provided Depth Code: 1-2-3-4-5-*-7-8-9-10 10 9 8 7 * 5 4 3 2 1 Key Blank Blank continued... Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 13 BD Laser Max Keyonline Via PC (USB Memory Stick) Update Instruction USB Memory stick requirements: 2-4 GB flash/thumb drive. Drive must be free of information prior to performing the update. 1. From the main menu select: a. Setup b. Updates c. Keyonline via pc i. Do you want to update the software? 1. Select “Yes”. ii. Please insert the USB memory stick in to the console and press “OK”. 1. The BD Laser Max will then transfer a “.csk” file to the USB memory stick. iii. Once the file transfer is complete the machine will display “Please remove the USB memory stick, download the update from Keyonline website on your personal computer and save it on the USB memory stick” 1. Select “OK” and remove the USB memory stick from the console. 2. Insert USB memory stick in to desktop/laptop. 3. Visit http://bdlaser.mscdirect.com/ 4. Double click “choose file”. 5. Search and select the “.csk” file downloaded from the BD Laser Max and select “open”. 6. Click “request update” a. A dialogue box with the message “This action may require some time. Please wait” will appear. Select “OK”. 7. The update package will then be created. a. Once the package creation is completed select i. For Windows users: Select “SAVE” and then “SAVE AS” under the drive that is associated with your USB drive. ii. For Chrome users: Select the “Show in folder” option, then pull to transfer the file to the USB drive. 8. Once the download/transfer is complete, safely eject the USB memory stick from the desktop/laptop. 9. Return to the BD Laser Max which displays the message “Please insert the USB memory stick containing the update”. a. Insert the USB memory stick and select “OK”. 10. The BD Laser Max will then display the message “Do you want to update the software?” a. Select “yes”. b. Please note: The update process may take some time. 11. Once the update file transfer is complete the machine will display “Software update successfully installed”. Select “OK” then remove the USB memory stick and save for future use. 1301 E. 9th Street Suite, #700 ∙ Cleveland, OH 44114 Email: [email protected] ∙ Phone: 866-438-6767 Confidential – Property of Class C Solutions Group, a business of MSC Industrial Supply Co. Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 14 Form D1 AUTHORIZATION FOR AUTOMOTIVE KEY GENERATION and/or IMMOBILIZER SYSTEM/ANTI-THEFT SERVICES (The LSID Holder must fill out this form, after personally looking at the photo I.D., the registration and the VIN plate on the Vehicle. These forms are to be kept for 2 years in a secured location as per the NASTF positive I.D. Policy. The NASTF Director of Operations will randomly audit these forms to ensure compliance with positive I.D policy. Failure to produce D-1 Forms when requested will result in LSID registry suspension and possible termination.) I hereby certify that I have the authority to order keys and immobilizer system reset services for the vehicle indicated below. I agree that the information I am providing is true and correct. Further, to the maximum extent permitted by applicable law, I agree to indemnify and hold harmless the service provider listed below and related parties providing security information from any and all liability or claims that may arise from the performance of this service. I further agree to indemnify the automaker and their affiliates, successors, assignees, and nominees from any and all claims, losses, or costs (including reasonable attorney's fees) arising from any acts or omissions of the service provider, the service provider’s employees, subcontractors, or agents. Vehicle Owner/Customer Name: Address: City / State / Zip Code: Telephone: | Vehicle Owner/Customer Signature Driver’s License Number 1 State Date Expiration Date Other Form of ID (specify type and number): Vehicle Year | | Make License Plate Number | Model Color: State of Vehicle Registration Vehicle ID Number (VIN) (17 characters) Odometer Reading (mileage): (or) For Dealership/Auctions: PO / Stock # Service Performed: Key cut from code Not Available: / Immobilizer reset Other (describe below) : VSP/Service Provider Business Name: Phone: Address: City / State / Zip Code: VSP/Technician Name VSP/Technician Signature Contracting Shop Owner/Manager Signature (Item 8 of the Positive ID Policy) | Subaru.net Username | / | / / Date / 1 IMPORTANT: Mobile Service Providers - If the VSP is not present at the time vehicle is received for service by a contracting service facility, the contracting service facility must make a photocopy of the vehicle owner’s driver’s license and attach to this form. Additionally, a valid registration must be left with the vehicle so that the VSP can verify that the driver’s license matches the ownership documentation. Bulletin Number: 01-168-09R; Revised: 11/16/16 Page 15