Mazda Protege-5 2003

• Recall 85850 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by dope, inc.The list can be found under "document search" located at the bottom of your screen. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 38125 [USA]: Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.
  Certain tradesonic combination lamps sold as replacement lamps for use on the above listed passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  tradesonic will notify owners and replace the lamps free of charge. The recall is expected to begin during july 2006. Owners may contact tradesonic at 626-934-8884.
  this recall only pertains to tradesonic aftermarket lamps and has no relation to any original equipment installed on the listed passenger vehicles.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 37958 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain alfaotto combination headlamps sold as replacement lamps for use on the above listed passenger vehicles. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  alfaotto will notify owners and replace the headlamps free of charge. The recall began on may 10, 2006. Owners may contact alfaotto at 626-656-2992 or visit their website at www.Alfaotto.Com.
  customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Rough idle causing to stall while driving, check engine light on for cylinder misfire, found cylinder 4 with a bent spark plug with the gap closed. Replaced all 4 plugs car ran fine for a few months only to have the same issue cylinder misfire with cylinder 4 with another bent plug gap closed. Possible something loose inside cylinder 4 causing the misfire issues to the plug. Mileage 130,280

Rough idle causing to stall while driving, check engine light on for cylinder misfire, found cylinder 4 with a bent spark plug with the gap closed. Replaced all 4 plugs car ran fine for a few months only to have the same issue cylinder misfire with cylinder 4 with another bent plug gap closed. Possible something loose inside cylinder 4 causing the misfire issues to the plug. Mileage 130,280

Tl* the contact owns a 2003 mazda protege. The contact stated while driving 50 mph, the vehicle stalled with the check engine warning light illuminated. The vehicle was towed to an independent mechanic to be diagnosed. The contact was informed that the engine and timing belt needed to be replaced. The engine was taken apart and the mechanic found a screw inside of the intake valve. The vehicle was not repaired. An unknown dealer was contacted and informed of the failure. The manufacturer was notified of the failure. The approximate failure mileage was 188,000.

Tl* the contact owns a 2003 mazda protege. The contact stated while driving 50 mph, the vehicle stalled with the check engine warning light illuminated. The vehicle was towed to an independent mechanic to be diagnosed. The contact was informed that the engine and timing belt needed to be replaced. The engine was taken apart and the mechanic found a screw inside of the intake valve. The vehicle was not repaired. An unknown dealer was contacted and informed of the failure. The manufacturer was notified of the failure. The approximate failure mileage was 188,000.

2003 mazda protege would not pass 2019 virginia safety inspection due to defective passenger side airbag. Dealer cannot replace because mazda has discontinued that part. Under virginia law, car cannot be operated without valid inspection certificate. Inspection disclosed no other disqualifying conditions.

2003 mazda protege 5 was traveling approximately 45mph and struck a moving vehicle in the rear quarter panel. No air bag was deployed in the mazda protege 5. The other vehicle's airbags deployed.

Severe rusting of left and right rear quarter panels leading into rear of rocker panels due to poor rust protection from factory.

The driver side seat belt latch is no longer working. There appears to be broken parts in the female part.

I was pulling up to my residence when the seat belt popped out of the receiver by itself.. I tried to re-latch the seat belt and it would not latch. I attempted a few more times and the seat belt receiver completely fell apart.. *tr

Common OBD-II Error Codes

• P0171 [2] System too Lean (Bank 1)
• P0507 [1] Idle Control System RPM Higher Than Expected