Mercedes-benz Glk350 4matic 2015

• Recall 151098 [USA]: An inaccurate vehicle location may delay emergency responders, increasing the risk of injury.
  Mercedes-benz usa, llc. (mbusa) is recalling certain 2013-2017 vehicles due to a software fault that may cause the date and time for the emergency call system (ecall) to differ from the actual date and time, potentially relaying an inaccurate vehicle location. For a full list of the affected models visit: https://static.Nhtsa.Gov/odi/rcl/2019/rmisc-19v787-4620.Pdf
  mbusa has initiated an over the air (ota) remote update. Mbusa will also notify owners, and dealers will check software for a successful ota or update the communication module software as needed, free of charge. The recall began december 23, 2019. Owners may contact mbusa customer service at 1-800-367-6372. Mbusa's number for this recall is 2019120008.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 129246 [USA]: An inflator explosion may result in sharp metal fragments striking the passenger or other occupants resulting in serious injury or death.
  Mercedes-benz usa, llc (mbusa) is recalling certain 2014 c250, c300 4matic, c350, c63 amg, e350 4matic coupe, e350 cabrio, e350 coupe, sls amg cabrio, sls amg coupe, 2014-2015 c250 coupe, c350 4matic coupe, c350 coupe, c63 amg coupe, glk 350, glk250 bluetec 4matic, glk350 rwd, 2015-2017 e400 4matic coupe, e400 cabrio, e400 coupe, 2014-2017 e550 cabrio, and 2014-2016 e550 coupe vehicles sold, or ever registered, in the states of al, ca, fl, ga, hi, la, ms, sc, tx, pr, as, gu, the mp, and vi or "zone a." additionally, mbusa is recalling certain 2012-2014 c250, e350 4matic coupe, sls amg cabrio, 2012-2015 c250 coupe, c350 4matic coupe, c350 coupe, c63 amg coupe, 2011 c300, 2011-2014 c300 4matic, c350, c63 amg, e350 cabrio, e350 coupe, sls amg coupe, 2015-2016 e400 4matic coupe, e400 cabrio, e400 coupe, 2011-2016 e550 cabrio, e550 coupe, 2011-2015 glk350 4matic, glk350 rwd, and 2013-2015 glk250 bluetec 4matic vehicles ever registered in the states of az, ar, de, dc, il, in, ks, ky, md, mo, ne, nv, nj, nm, nc, oh, ok, pa, tn, va, and wv or "zone b." mbusa is also recalling certain 2012-2014 c250, e350 4matic coupe, sls amg cabrio 2012-2015 c250 coupe, c350 4matic coupe, c350 coupe, c63 amg coupe, 2010-2011 c300, 2010-2014 c300 4matic, c350, c63 amg, e350 coupe, 2011-2014 e350 cabrio, sls amg coupe, 2015-2016 e400 4matic coupe, e400 cabrio, e400 coupe, 2016-2017 e550 cabrio, 2010-2016 e550 coupe, 2010-2015 glk350 4matic, glk350 rwd, and 2013-2015 glk250 bluetec 4matic vehicles ever registered in the states of ak, co, ct, id, ia, me, ma, mi, mn, mo, nh, ny, nd, or, ri, sd, ut, vt, wa, wi and wy or "zone c." these vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  mbusa will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began march 29, 2019. Owners may contact mbusa customer service at 1-800-367-6372.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 130740 [USA]: If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
  Mercedes-benz usa, llc. (mbusa) is recalling these vehicles: 2014-2018 cla250, cla250 4matic, cla45 amg 4matic, 2015-2018 gla250, gla250 4matic, gla45 amg 4matic, c300 4matic, c63s amg, 2012-2014 c250, c350, c300 4matic, e550 4matic, 2013-2014 c63 amg, 2012-2015 c250 coupe, c350 coupe, c63 amg coupe, 2013-2015 c350 4matic coupe, glk250 4matic bluetec, glk350, glk350 4matic, 2016-2017 C350E, c43 amg, 2015 c400 4matic, 2016-2018 c63 amg, glc300, glc300 4matic, 2017-2018 c300 coupe, c300 4matic coupe, c43 amg, c63 amg coupe, c63s amg coupe, c300 cabriolet, c300 4matic cabriolet, c43 amg cabriolet, c63 amg cabriolet, c63s amg cabriolet, glc300 4matic coupe, glc43 amg, glc43 amg coupe, 2014 e350 coupe, e350 4matic coupe, e350 cabriolet, e400 hybrid, 2015-2017 e400 coupe, e400 4matic coupe, e400 cabriolet, 2014-2017 e550 coupe, e550 cabriolet, B250E, 2014-2016 e250 bluetec, e63 amg 4matic wagon, 2012-2013 e350 bluetec, 2012-2016 e350, e350 4matic, 2015-2016 e400, e400 4matic, 2012 e63 amg, 2014-2015 e250 4matic bluetec, 2013-2016 e350 wagon, 2017 glC300D 4matic, and 2018 glC350E 4matic. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.
  mbusa will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began in december 6, 2017. Owners may contact mbusa customer service at 1-877-496-3691.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 125652 [USA]: A loss of steering can increase the risk of a crash.
  Mercedes-benz usa llc. (mbusa) is recalling certain 2013-2014 c250, c300 4matic, glk250 4matic bluetec and glk350 vehicles, 2013 c250 coupe, c350, c350 4matic coupe, c350 coupe and c63 amg coupe vehicles, and 2013-2015 glk350 4matic vehicles. The steering coupling connecting bolt may have been insufficiently tightened, possibly resulting in a loss of steering.
  mbusa will notify owners, and dealers will inspect the steering coupling connecting bolt, tightening it as necessary, free of charge. The recall began may 2017. Owners may contact mbusa customer service at 1-800-367-6372.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

My car shifts from drive into park when i'm moving less than 5 miles an hour, so i've been trapped (momentarily) taking turns, in intersections, in traffic.

We received a recall notice in october and have called numerous times to schedule an appointment and constantly told they don't have the parts

We received a recall notice in october and have called numerous times to schedule an appointment and constantly told they don't have the parts

Car puts itself in park while coming to a stop when it's snowing/raining/ in the car wash, all warning lights and electric power steering go off.

Car puts itself in park while coming to a stop when it's snowing/raining/ in the car wash, all warning lights and electric power steering go off.

The srs signal came on while driving

Driving 25 mph around a curve when my car lost control, despite my best attempts my car would not allow me to take control or to break. My car went from 25 mph to 60 mph through a two lane traffic street, forcing me to swerve in and out of traffic merely missing six cars and a semi trailer truck, spinning my car around twice and facing the opposite direction of traffic.

The srs signal came on while driving

Driving 25 mph around a curve when my car lost control, despite my best attempts my car would not allow me to take control or to break. My car went from 25 mph to 60 mph through a two lane traffic street, forcing me to swerve in and out of traffic merely missing six cars and a semi trailer truck, spinning my car around twice and facing the opposite direction of traffic.

Common OBD-II Error Codes

• C300D [1] C300D
• C350E [1] C350E
• B250E [1] B250E
• P0234 [1] Engine Turbocharger/Supercharger Overboost Condition
• P2269 [1] Water in Fuel Condition
• P0722 [1] Output Speed Sensor No Signal
• P0723 [1] Output Speed Sensor Intermittent
• P0729 [1] Gear 6 Incorrect Ratio
• P0730 [1] Incorrect Gear Ratio
• P0731 [1] Gear I Incorrect ratio
• P0732 [1] Gear 2 Incorrect ratio
• P0733 [1] Gear 3 Incorrect ratio
• P0734 [1] Gear 4 Incorrect ratio
• P0735 [1] Gear 5 Incorrect ratio
• P076F [1] Gear 7 Incorrect Ratio
• P0606 [1] PCM Processor Fault
• P0101 [1] Mass or Volume Air Flow "A" Circuit Range/Performance Problem
• U1454 [1] U1454