18-089-19

Service Bulletin Details

Public Details for: 18-089-19

Witech small leak verification test (slvt) - P0456-evap system small leak


- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 -

NUMBER:
GROUP:
DATE:
18-089-19
18 - Vehicle Performance
November 1, 2019
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
SUBJECT:
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
MODELS:
2015 - 2020
(ALL)
(FCA Group Gas Vehicles)
NOTE: This bulletin applies to all 2015 - 2020 FCA US LLC vehicles with the available
wiTECH SLVT.
DISCUSSION:
In order to verify small leaks are present or to determine the repair correction for the small leak
condition, wiTECH has made available a SLVT.
It is mandatory to run the wiTECH SLVT while performing the P0456 diagnostics.
For further explanation on the wiTECH SLVT, please reference the below materials:
• Refer to Warranty Bulletin D-19-23 for details associated with the warranty claim
processing.
• Refer to Warranty Newsletter Volume 5, Issue 10.
• For additional help with understanding this diagnostic procedure, please reference the
Master Tech training course – MTCE1901 – “Master Tech Continuing Education Edition
1 – EVAP System Overview and Diagnosis”.
The wiTECH SLVT MUST be run first to verify a leak is present and run after repairing or replacing
any components to verify the fix.
• A road test will not confirm the repair, as P0456 is only set with multiple engine off and drive
cycles, which cannot be reproduced during a dealer visit.
• wiTECH SLVT is the only tool currently available to confirm a fix after the repair to assure the
vehicle was “Fixed First Visit (FFV)”.
18-089-19
-2-
When diagnosing the P0456, follow the service diagnostic procedure outlined in Service Library.
The diagnostic will also help explain how to interpret the wiTECH SLVT result and determine
the best repair solution (Fig. 1) or (Fig. 2) .
Fig. 1
Failed Test Screen
Fig. 2
Passed Test Screen
POLICY:
Information Only


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.