ITB17-042D
Service Bulletin Details
Public Details for: ITB17-042D
Infiniti; dtc P0456 caused by evap leak at vent control valve o-ring this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.
- 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 -
Models from 2020
| 2020 INFINITI Q50 |
| 2020 INFINITI Q60 |
| 2020 INFINITI QX50 |
| 2020 INFINITI QX60 |
| 2020 INFINITI QX80 |
Models from 2019
| 2019 INFINITI Q50 |
| 2019 INFINITI Q60 |
| 2019 INFINITI Q70 |
| 2019 INFINITI QX30 |
| 2019 INFINITI QX50 |
| 2019 INFINITI QX60 |
| 2019 INFINITI QX80 |
Models from 2018
| 2018 INFINITI Q50 |
| 2018 INFINITI Q50 HYBRID |
| 2018 INFINITI Q60 |
| 2018 INFINITI Q70 |
| 2018 INFINITI Q70 HYBRID |
| 2018 INFINITI QX30 |
| 2018 INFINITI QX60 |
| 2018 INFINITI QX80 |
Models from 2017
Models from 2016
| 2016 INFINITI Q50 |
| 2016 INFINITI Q50 HYBRID |
| 2016 INFINITI Q70 |
| 2016 INFINITI Q70 HYBRID |
| 2016 INFINITI QX50 |
| 2016 INFINITI QX60 |
| 2016 INFINITI QX60 HYBRID |
| 2016 INFINITI QX80 |
Models from 2015
Models from 2014
| 2014 INFINITI Q50 |
| 2014 INFINITI Q50 HYBRID |
| 2014 INFINITI Q60 |
| 2014 INFINITI Q70 |
| 2014 INFINITI Q70 HYBRID |
| 2014 INFINITI QX50 |
| 2014 INFINITI QX60 |
| 2014 INFINITI QX60 HYBRID |
| 2014 INFINITI QX80 |
Models from 2012
| 2012 INFINITI G25 |
| 2012 INFINITI G37 |
| 2012 INFINITI M37 |
| 2012 INFINITI M56 |
| 2012 INFINITI QX56 |
Models from 2011
| 2011 INFINITI G25 |
| 2011 INFINITI G37 |
| 2011 INFINITI M37 |
| 2011 INFINITI M56 |
| 2011 INFINITI QX56 |
Models from 2008
| 2008 INFINITI G35 |
| 2008 INFINITI G37 |
| 2008 INFINITI M35 |
| 2008 INFINITI M45 |
| 2008 INFINITI QX56 |
Models from 2006
| 2006 INFINITI M35 |
| 2006 INFINITI M45 |
| 2006 INFINITI QX56 |
Models from 2005
| 2005 INFINITI QX56 |
Models from 2004
| 2004 INFINITI QX56 |
Classification: Reference: Date: EC16-035D ITB17-042D March 1, 2021 INFINITI; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. APPLIED VEHICLES: 2011-2012 G25 Sedan (V36) 2007-2008 G35 Sedan (V36) 2009-2013 G37 Convertible (V36) 2008-2013 G37 Coupe (V36) 2009-2013 G37 Sedan (V36) 2006-2010 M45/M35 (Y50) 2011-2013 M37/M56 (Y51) 2004-2010 QX56 (JA60) 2011-2013 QX56 (Z62) 2015 Q40 (V36) 2014-2021 Q50 (V37) 2014-2018 Q50 Hybrid (V37) 2014-2015 Q60 Convertible (V36) 2014-2015 Q60 Coupe (V36) 2017-2021 Q60 Coupe (V37) 2014-2019 Q70 (Y51) 2014-2018 Q70 Hybrid (Y51) 2017-2019 QX30 (H15) 2014-2017 QX50 (J50) 2019-2021 QX50 (J55) 2014-2020 QX60 (L50) 2014-2017 QX60 Hybrid (L50) 2014-2021 QX80 (Z62) IF YOU CONFIRM The MIL is ON in an APPLIED VEHICLE with DTC P0456 (EVAP VERY SML LEAK) AND DTC P0456 is not caused by a loose fuel fill cap (refer to ITB13-044). An EVAP leak has been detected where the vent control valve mounts to the canister. The vent control valve O-ring seal is determined to be the cause. ACTION 1. Replace the vent control valve as an assembly. Refer to the applicable Electronic Service Manual (ESM) for the replacement procedure. NOTE: The vent control valve O-ring seal (O-ring) is no longer available as a service part. Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this applies to your vehicle. 1/2 AMENDMENT HISTORY PUBLISHED DATE REFERENCE July 21, 2017 ITB17-042 Original bulletin published November 16, 2018 ITB17-042A APPLIED VEHICLES and CLAIMS INFORMATION updated January 29, 2019 ITB17-042B APPLIED VEHICLES updated September 14, 2020 ITB17-042C APPLIED VEHICLES updated ITB17-042D APPLIED VEHICLES updated, ACTION revised, and SERVICE PROCEDURE, PARTS INFORMATION, and CLAIMS INFORMATION removed March 1, 2021 DESCRIPTION 2/2 ITB17-042D