Tenneco Tenneco
Vehicle Details: Service Bulletins
Below you will find all available information on the TENNECO TENNECO.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| TENNECO |
TENNECO VIN Decoder
Use the box here to look up VINs from TENNECO as well as other manufacturers
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- Product Notice - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Product notice requesting return of boxes that shipped with one bushing; boxes should contain two bushings
- Bulletin - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Bulletin notice requesting return of boxes that shipped with one bushing; boxes should contain two bushings
- Napa - SUSPENSION: Notice regarding stop sale of quick strut assemblies
- Napa-1 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Notice related to certain ball joints that did not engineering specifications
- Moog - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Notice related to design error that prevents installation of certain ball joints without damaging the part
- 2023-11-DSR-1 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Notice requesting return of out of specification pcv valve
- MOOG TR29206 - SUSPENSION: Notice requesting return of out of specification ball joints
- Monroe TR23971 - SUSPENSION: Notice to return certain quick strut assemblies that do not conform to standards.
- RGA 27261 - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:SEALS/GASKETS: Notice to return gaskets that do not conform to manufacturing standard
- RGA 27261-Pro - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:SEALS/GASKETS: Notice to return gaskets that do not conform to manufacturing standard
- NAPA US TRC 2796 - SUSPENSION:REAR:SHOCK ABSORBER: Notice request return of shock absorbers due to length
- Monroe US TRC 27 - SUSPENSION:REAR:SHOCK ABSORBER: Notice request return of shock absorbers due to length
- Napa Product Not - EQUIPMENT: Notice to return gaskets that do not conform to manufacturing standard
- Fel-Pro-Product - EQUIPMENT: Notice to return gaskets that do not conform to manufacturing standard
- Product Notice - EQUIPMENT: Notice request return of shock absorbers due to length
- Monroe - EQUIPMENT: Notice request return of shock absorbers due to length
- NAPA TRC27936 - EQUIPMENT: Notice request returning of certain quick-strut assemblies.
- TRC27936 - EQUIPMENT: Notice request returning of certain roadmatic assemblies.
- Monroe TRC27936 - SUSPENSION: Notice request returning of certain quick-strut assemblies.
- Napa Bulletin - ENGINE AND ENGINE COOLING: Rear main seal, conversion and engine gasket have manufacturing error.
- NAPA-FEL-PRO - ENGINE AND ENGINE COOLING: Rear main seal, conversion and engine gasket have manufacturing error.
- NAPA US - SUSPENSION: Notice related to strut assembly that was not manufactured to standards.
- NAPA Canada - SUSPENSION: Notice related to strut assembly that was not manufactured to standards.
- Napa TRC 27611 - SUSPENSION: Notice related to shock absorbers that cannot be installed due to an issue with the bushing assembly
- Monroe TRC27611 - SUSPENSION: Notice related to shock absorbers that cannot be installed due to an issue with the bushing assembly.
- NAPA 1 - SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT: Notice that certain ball joints do not meet engineering specifications
- NAPA - EQUIPMENT: Notice that certain ball joints do not meet engineering specifications
- FELPRO TR26453 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : A packaging error has been identified related to the part number listed above. Please scrap
- NAPA TR25978 - EQUIPMENT:ELECTRICAL: Product notice related to a manufacturing error in oespectrum monotube shock that prevent the part from being installed
- MONROE TR25978 - EQUIPMENT:ELECTRICAL: Product notice related to a manufacturing error in oespectrum monotube shock that prevent the part from being installed
- WAGNER TR26513 - BRAKES (PWS): Product notice related to mislabeling the part number for disc brake pad set
- National TR25286 - POWER TRAIN: Product notice related to packaging for crankshaft seal parts
- 171347LST - EQUIPMENT: Monroe quick sturt 171347lst
- 71495 - EQUIPMENT: Monroe conversion kit 71495st
- MOOG TRC25643 - SUSPENSION: Notice to scrap certain stabilizer bar links due to a manufacturing error that results in the affected parts not being able to be installed
- NAPA TRC 25349 - ENGINE AND ENGINE COOLING: Notice regarding exhaust pipe connector that was incorrectly sized
- WALKER TRC 25412 - EQUIPMENT: Notice regarding on calcat direct fit converter with the incorrect executive order embossed on them
- RAN032216.1 - EQUIPMENT: Potential quality issue with kit boxes
- RAN032216 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Discontinuance of bulletin #ran032216.1
- 171347LST - EQUIPMENT: Monroe? Quick sturt 171347lst
- 71495 - EQUIPMENT: Monroe? Conversion kit 71495st
- RAN032216.1 - STRUCTURE: Potential quality issue with kit boxes
- RAN032216 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Discontinuance of bulletin #ran032216.1
- NAPA TRC25169 - SUSPENSION: Notice requesting return of inventory due to strut assemblies that were manufactured without the bushing and sleeve and cannot be installed
- TRC 25191 - ENGINE AND ENGINE COOLING: Notice to return intake gaskets for an embossment error
- NAPA TRC 24969 - SUSPENSION: Notice to return passenger car shock absorbers
- Product Notice 4 - SUSPENSION: Notice to customers to scrap certain control arm and ball joint assemblies because wheels could not be properly aligned
- Product Notice 2 - SUSPENSION: Notice to customers to scrap certain control arm and ball joint assemblies because wheels could not be properly aligned
- Product Notice N - EQUIPMENT: Notice to customers that some nps103rp2c ball bearings were misboxed and should be returned.
- 2020-01-DSR-072 - EQUIPMENT: Announces request by supplier to return product due to the units not meeting specifications.
- Product Notice 5 - SUSPENSION: Notice that control arms cannot be properly installed on a honda civic and provides the correct part number
- Product Notice 5 - SUSPENSION: Notice that certain track bar bushings are the incorrect bushings for the application and cannot be properly installed onto the vehicle
- Product Notice 5 - SUSPENSION: Notification that some control arm and ball joint assemblies were labeled with an incorrect part number
- Product Notice 5 - EQUIPMENT: Product notice alerting customers to inspect and return bearing cones that cannot be installed on vehicles
- K200727 - SUSPENSION: Customer letter regarding stabilizer bar bushing kit design issue that would prevent installation
- K500351 - EQUIPMENT: Notifies of a quality issue with ball joints that involves the grease fitting thread not engaging into the threaded hole, preventing the grease fitting from being installed
- K500138 - SUSPENSION: Notice to return moog ball joints due to an improper thread cut
- K500351 - SUSPENSION: Notice to return moog ball joint grease due to improperly fitting
- CSR TL23989 1725 - SUSPENSION: Notice regarding quick-struts that do not meet quality specifications