NTB18-055b
Service Bulletin Details
Public Details for: NTB18-055b
Cvt fluid level quick check gauge this bulletin applies only to vehicles equipped with a continuously variable transmission (cvt). This bulletin has been amended. See amendment history on the last page. Discard all previous versions
- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -
Models from 2019
2019 NISSAN MAXIMA |
2019 NISSAN MURANO |
2019 NISSAN PATHFINDER |
2019 NISSAN ROGUE |
2019 NISSAN ROGUE SPORT |
Models from 2018
2018 NISSAN ALTIMA |
2018 NISSAN MAXIMA |
2018 NISSAN MURANO |
2018 NISSAN PATHFINDER |
2018 NISSAN ROGUE |
2018 NISSAN ROGUE SPORT |
Models from 2017
2017 NISSAN ALTIMA |
2017 NISSAN MAXIMA |
2017 NISSAN MURANO |
2017 NISSAN PATHFINDER |
2017 NISSAN QUEST |
2017 NISSAN ROGUE |
Models from 2016
2016 NISSAN ALTIMA |
2016 NISSAN MAXIMA |
2016 NISSAN MURANO |
2016 NISSAN PATHFINDER |
2016 NISSAN QUEST |
2016 NISSAN ROGUE |
Models from 2015
2015 NISSAN ALTIMA |
2015 NISSAN MURANO |
2015 NISSAN PATHFINDER |
2015 NISSAN QUEST |
2015 NISSAN ROGUE |
Models from 2013
2013 NISSAN ALTIMA |
2013 NISSAN PATHFINDER |
Classification: Reference: AT18-005b Date: NTB18-055b March 20, 2019 CVT FLUID LEVEL QUICK CHECK GAUGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin. APPLIED VEHICLES: 2013-2018 Altima Sedan (L33) 2016-2019 Maxima (A36) 2015-2019 Murano (Z52) 2013-2019 Pathfinder (R52) 2015-2017 Quest (E52) 2014-2019 Rogue (T32) 2017-2019 Rogue Sport (J11) 2017-2019 Sentra Turbo (B17) APPLIED TRANSMISSION: APPLIED VEHICLES equipped with CVT ONLY SERVICE INFORMATION Special tools CVT Oil Level Quick Check Gauge (J-51155) and CVT Charge Pipe Cap Release (J-52611) are now available (see page 2). Each dealer has been shipped one each of these tools. Additional tools can be obtained from Tech•Mate at 1-800-662-2001. Refer to the SERVICE PROCEDURE starting on page 3 to determine how to perform a CVT fluid quick level check. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/6 SPECIAL TOOLS CVT Oil Level Quick Check Gauge (J-51155) TP180561 Figure 1 CVT Charge Pipe Cap Release (J-52611) Figure 2 2/6 NTB18-055b SERVICE PROCEDURE Inspect CVT Fluid Level NOTE: Steps 1 through 6 will ensure that CVT fluid is properly distributed throughout the CVT. A video on how to use tool J-52611 is available on nissantechmate.com: On the home page, type “J-52611” in the search window, select “Enter” on your keyboard, and then select Charge Pipe Cap Release Tool. 1. Park the vehicle on level ground (engine running, parking brake set). 2. Using CONSULT III plus (C-III plus), ensure that the CVT fluid operating temperature is within the range of 170°F-180°F (77°C-82°C). 3. Shift the transmission into REVERSE for 5 seconds. 4. Shift the transmission into DRIVE for 5 seconds. 5. Shift the transmission into REVERSE for 5 seconds. 6. Shift the transmission into PARK. 7. Install special tool CVT Charge Pipe Cap Release (J-52611) where shown in Figure 3. See page 2, SPECIAL TOOLS. NOTE: The tool shown in Figures 3 & 4 is the same as the one shown in Figure 2, but looks slightly different. 8. Squeeze Squeeze the tool toward the cap, and then slightly lift the cap (see Figure 3). NOTE: The cap’s locking tab is unlocked while squeezing. Cap J-52611 Notice the gap between the cap and charging pipe in Figure 4. Figure 3 3/6 NTB18-055b 9. Remove tool J-52611 from the cap. Gap Charging pipe Figure 4 10. Pull to remove the cap from the charging pipe. Tool CVT Oil Level Quick Check Gauge (J-51155) can now be used to determine the CVT fluid level. Figure 5 4/6 NTB18-055b The handle on tool J-51155 has two positions - Red and Blue. Refer to Table A on the next page for the correct position for a given vehicle. Red Blue 11. TP180558 TP180557 Figure 6 With the vehicle in PARK and the engine running, insert tool J-51155 into the pipe. Make sure to use the correct handle position (refer to Table A). Blue Red TP180559 TP180558 Figure 7 5/6 NTB18-055b Table A 12. Model 2013-2018 Altima Sedan (QR25) Level (mm) 23-30 Handle Position Blue 2013-2018 Altima Sedan (VQ35) 14-22 Red 2016-2019 Maxima 14-22 Red 2015-2019 Murano (Non-hybrid) 14-22 Red 2013-2019 Pathfinder (Non-hybrid) 14-22 Red 2015-2017 Quest 2014-2019 Rogue (U.S. and Japan built) (VIN starts with 5N or JN) (Non-hybrid) 2015-2019 Rogue (Korea built) (VIN starts with KN) (Non-hybrid) 2017-2019 Rogue Sport 14-22 Red 44-51 Blue 50-57 Blue 10-17 Blue 2017-2019 Sentra (Turbo ONLY) 10-17 Blue Inspect tool J-51155 to determine the CVT fluid level in millimeters, and then compare the reading to the specifications in Table A above. 60 mm 10 mm TP180560 Figure 8 ADJUST CVT FLUID LEVEL 13. Adjust the fluid level from the bottom of the CVT according to the procedure in the Electronic Service Manual (ESM). AMENDMENT HISTORY PUBLISHED DATE REFERENCE DESCRIPTION August 3, 2018 NTB18-055 Original bulletin published November 5, 2018 NTB18-055a March 20, 2019 NTB18-055b Steps 1 and 2 revised APPLIED VEHICLES and Table A amended, the picture of tool J-51155 moved to page 2, and tool J-52611 added 6/6 NTB18-055b