Mack Gu-granite 2010

• Recall 103291 [USA]: A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
  Mack trucks inc. (mack) is recalling certain model year 2010-2014 chu, cxu, and mru, 2007 ct and cv, 2008-2014 gu, and 2011-2014 leu, and td trucks manufactured february 28, 2006, through november 8, 2013, and equipped hamsar electronic flasher. The hazard warning lights may fail.
  mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-june 2014. Interim letters went out to owners on june 23, 2014. The recall began on july 25, 2014. Owners may contact mack customer service at 1-866-298-6586. Mack's number for this recall is sC0379.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 102069 [USA]: Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
  Mack trucks, inc. (mack) notified the agency on february 20, 2014, that they are recalling certain model year 2010-2012 chu, cxu, gu and td vehicles manufactured from june 16, 2009, through july 8, 2011. While continuing to research the scope of the issue, mack expanded the recall on november 18, 2014 to include certain model year 2008-2009 and 2013-2014 chu, cxu, gu and td vehicles manufactured from june 16, 2009, through july 8, 2011. Having completed its investigation, mack once again expanded the recall during february 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes chu, cxu, gu and td vehicles produced october 13, 2006, through october 3, 2014. In the affected vehicles, the electronic power distribution module (epdm) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the epdm.
  mack has notified owners, and dealers will inspect the epdm. If contamination has occurred, dealers will replace the epdm and address the leak, free of charge. Owners of model year 2010-2012 chu, cxu, gu and td vehicles were initially notified april 24, 2014. Owners affected by the recall expansions were notified in february 2015. Owners may contact mack trucks at 1-336-393-2000. Mack's number for this recall is sC0375.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 78736 [USA]: A short can potentially cause a vehicle fire.
  Mack trucks is recalling certain model year 2008-2011 gu heavy trucks manufactured from september 12, 2007, through april 8, 2011, with a four battery cable design. As a result of the routing and clipping used, the battery cables may come into contact with frame hardware, which, as a result of chafing, may cause the insulation to become worn to a point where a short occurs.
  dealers will re-route the battery cables and replace the cables if chafing has occurred. This service will be performed free of charge. The safety recall began on july 11, 2011. Owners may contact mack trucks at 1-800-866-1177.
  mack's safety recall no. SC0354.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 68799 [USA]: If the brakes do not perform as they should, a vehicle crash could occur.
  Mack is recalling certain model year 2008 through 2011 gu and mru model vehicles manufactured with a front tow glad hand option. The actuation and release timing of the vehicles exceeds the limit which fails to conform to the requirements of federal motor vehicle safety standard no. 121, "air brake systems."
  mack will notify owners and repair the vehicle free of charge. The safety recall began on february 1, 2011. Owners may contact mack at 1-877-800-4945.
  mack's recall campaign number is sC0345.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2014527 [Canada]: Electrical
  On certain model vehicles, water around the windshield can migrate into the electronic power distribution module and contaminate it. As a result, circuits may be bridged creating an electrical short. This could potentially result in a fire, increasing the risk of injury and/or damage to property. Correction: dealers will inspect the module, and if found contaminated, will replace it. Additional measures will be taken to address the leak if contamination is found. Note: this is an expansion of recall 2014-053.

  Show Content

• Recall 2014146 [Canada]: Lights and instruments
  On certain vehicles, the directional/hazard signal flasher may fail. Actuation of the turn signal or hazard lights in this condition would cause them to remain illuminated and not flash as intended. As a result, drivers may not be able to clearly signal their intentions to turn, change lanes or warn others in an emergency situation. Correction: dealers will replace the turn signal/hazard flasher module.

  Show Content

• Recall 2014053 [Canada]: Electrical
  On certain model vehicles, water around the windshield can migrate into the electronic power distribution module and contaminate it. As a result, circuits may be bridged creating an electrical short. This could potentially result in a fire, increasing the risk of injury and/or damage to property. Correction: dealers will inspect the module, and if found contaminated, will replace it. Additional measures will be taken to address the leak if contamination is found.

  Show Content

• Recall 2011261 [Canada]: Other
  On certain trucks, the clutch pedal assembly may have been manufactured incorrectly and could fail. This could allow the clutch pedal to fall to the floor, prohibiting clutch operation, and causing a reduction in braking efficiency. Increased stopping distances could result in a crash causing property damage and/or personal injury. Correction: dealers will replace the clutch pedal assembly.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Tl* the contact owns a 2010 mack truck gu712. The driver was traveling 30 mph and attempted to decelerate when the vehicle suddenly accelerated. The driver was able to apply the brakes and maintain control of the vehicle. The engine rpms increased 12000-17000, and continued to increase when the engine was shut off. The certified mechanic inspected the truck and replaced the throttle. The vehicle was repaired. The manufacturer was not made aware of the failure. The failure and current mileage was 9,015. Updated 05/12/14*lj the consumer stated while in operation, the unit was abnormally hard to maintain. When he proceeded from a stop, the throttle was above idle. The consumer was informed the throttle was defective.

Common OBD-II Error Codes

• C0379 [1] C0379
• C0375 [1] C0375
• C0354 [1] C0354
• C0345 [1] Low Fluid Circuit Circuit - Malfunction
• P215A [1] Vehicle Speed - Wheel Speed Correlation
• P1058 [1] P1058
• U029D [1] Lost Communication With NOX Sensor "A"
• U029E [1] Lost Communication With NOX Sensor "B"
• U02A3 [1] U02A3
• P0201 [1] Injector Circuit Malfunction - Cylinder 1
• P0202 [1] Injector Circuit Malfunction - Cylinder 2
• P0203 [1] Injector Circuit Malfunction - Cylinder 3
• P0204 [1] Injector Circuit Malfunction - Cylinder 4
• P0205 [1] Injector Circuit Malfunction - Cylinder 5
• P0206 [1] Injector Circuit Malfunction - Cylinder 6
• U0001 [1] High Speed CAN Communication Bus
• U0010 [1] Medium Speed CAN Communication Bus
• P04DB [1] Crankcase breather system disconnected
• P1072 [2] P1072
• P0257 [1] Injection Pump Fuel Metering Control B Range/Performance Injector)
• P2A17 [1] P2A17
• P2A1F [1] P2A1F
• P1052 [1] P1052
• P02FA [1] Diesel Intake Air Flow Position Sensor Minimum/Maximum Stop Performance
• P0471 [1] Exhaust Pressure Sensor "A" Circuit Range/Performance
• P0420 [1] Catalyst System Efficiency Below Threshold (Bank 1)
• P009E [2] Fuel Pressure Relief Control Performance/Stuck Off
• P226C [1] ISO/SAE Reserved
• P0128 [1] Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)
• P249F [1] Excessive time to enter closed loop Diesel particulate filter (DPF) regeneration control
• P24A0 [1] Closed loop Diesel particulate filter (DPF) regeneration control, control limit reached – temperature too low
• P24A4 [1] P24A4
• P10FE [1] P10FE
• P249C [1] Excessive time to enter closed loop reductant injection control
• P0422 [1] Main Catalyst Efficiency Below Threshold (Bank 1)