NTB17-003D
Service Bulletin Details
Public Details for: NTB17-003D
Fluid leak caused by transfer assembly right side drive shaft oil seal this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.
- 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -
Models from 2020
2020 NISSAN ALTIMA |
2020 NISSAN MURANO |
2020 NISSAN PATHFINDER |
2020 NISSAN ROGUE |
2020 NISSAN ROGUE SPORT |
Models from 2019
2019 NISSAN ALTIMA |
2019 NISSAN MURANO |
2019 NISSAN PATHFINDER |
2019 NISSAN ROGUE |
2019 NISSAN ROGUE HYBRID |
2019 NISSAN ROGUE SPORT |
Models from 2018
2018 NISSAN MURANO |
2018 NISSAN PATHFINDER |
2018 NISSAN ROGUE |
2018 NISSAN ROGUE HYBRID |
2018 NISSAN ROGUE SPORT |
Models from 2017
2017 NISSAN MURANO |
2017 NISSAN PATHFINDER |
2017 NISSAN ROGUE |
2017 NISSAN ROGUE HYBRID |
2017 NISSAN ROGUE SPORT |
Models from 2016
2016 NISSAN MURANO |
2016 NISSAN MURANO HYBRID |
2016 NISSAN PATHFINDER |
2016 NISSAN ROGUE |
Models from 2013
2013 NISSAN PATHFINDER |
Classification: Reference: TF16-001D Date: NTB17-003D March 1, 2022 FLUID LEAK CAUSED BY TRANSFER ASSEMBLY RIGHT SIDE DRIVE SHAFT OIL SEAL This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. 2019-2021 Altima (L34) 2014 Pathfinder Hybrid (R52H) 2015-2021 Murano (Z52) 2014-2020 Rogue (T32) 2016 Murano Hybrid (Z52H) 2017-2019 Rogue Hybrid (T32H) 2013-2020 Pathfinder (R52) 2017-2021 Rogue Sport (J11) APPLIED DRIVELINES: AWD only NOTE: Bulletin does not apply to S35 series Rogue/Rogue Select. APPLIED VEHICLES: SERVICE INFORMATION If fluid is leaking from the front passenger (RH) side of the transfer assembly, refer to the information in this bulletin. Transfer assembly RH drive shaft NOTE: The fluid leak is NOT caused by the dust seal shown in Figure 1. 1. DO NOT REPLACE the transfer assembly. 2. Replace the drive shaft oil seal and the dust seal. Fluid visible here The drive shaft oil seal and the dust seal can be replaced without removing the transfer assembly from the vehicle. It is not necessary to remove the transfer cover to replace the drive shaft oil seal and the dust seal. Refer to NTB21-094 for drive shaft oil seal and dust seal replacement. Fluid leak not caused by this dust seal Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/7 Essential Special Service Tools Additional Essential Tools are available from Tech•Mate online www.nissantechmate.com or by phone: 1-800-662-2001. J-52469-1 Seal Seal Protector Protector J- Figure 2 J-8092 J-8092 Driver Handle J-52280 Driver Driver Handle handle JFigure 3 2/7 NTB17-003D J-52282 Seal SealInstaller Installer Figure 4 J-52390 Seal SealInstaller Installer Figure 5 3/7 NTB17-003D Typical TY21C Transfer Assembly – Exploded View for Reference Only Do not disassemble this section for the repairs in this bulletin Dust seal Transfer cover Drive shaft oil seal / ring gear shaft oil seal: Fits in end of ring gear shaft * Ring gear shaft Toward front of vehicle Figure 6 * The seal causing the leak is called “Drive shaft oil seal” in the ESM for all applied models except Rogue, Rogue Hybrid, Rogue Sport, and Altima. For these vehicles, it is called “Ring gear shaft oil seal”. 4/7 NTB17-003D Transfer cover shown removed for reference only Ring gear shaft Transfer assembly shown removed for reference only Fluid leak caused by this seal (33114-xxxxx); drive shaft oil seal / ring gear shaft oil seal Figure 7 To avoid damage to the transfer assembly and new seals, use an appropriate seal installer and seal protector during the repair. This repair does NOT require transfer assembly removal from the vehicle. This repair does NOT require transfer cover removal from the transfer assembly. 5/7 NTB17-003D PARTS INFORMATION DESCRIPTION PART # PREFIX (1) QUANTITY SEAL-OIL, DRIVE PINION (Drive Shaft Oil Seal/Ring Gear Shaft Oil Seal) 33114 1 SEAL-OIL (Dust Seal) 33142 1 PIN-COTTER 40073 1 NUT-HEX (axle hub nut) 40262 1 NUT (lower strut nut) 01223 2 (1) Refer to the Electronic Parts Catalog and use the VIN to determine the correct complete Part Numbers for the vehicle you are working on. CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: DESCRIPTION Replace RH Front Axle Seal MODEL PFP OP CODE SYM DIA FRT Altima (L34) 2.2 Murano (Z52) 2.0 Murano Hybrid (Z52H) 1.8 Pathfinder (R52) (1) Pathfinder Hybrid (R52H) KX05AA ZR 53 2.0 1.8 Rogue (T32) 1.0 Rogue Hybrid (T32H) 1.1 Rogue Sport (J11) 1.7 (1) Refer to the Electronic Parts Catalog and use the Drive Pinion Seal part number (33114-*****) as the Primary Failed Part. 6/7 NTB17-003D AMENDMENT HISTORY PUBLISHED DATE January 20, 2017 REFERENCE DESCRIPTION NTB17-003 Original bulletin published March 25, 2020 NTB17-003A APPLIED VEHICLES and PARTS INFORMATION revised May 27, 2021 NTB17-003B APPLIED VEHICLES revised, and two changes made to the QUANTITY column on page 6 February 16, 2022 NTB17-003C Changes throughout March 1, 2022 NTB17-003D CLAIMS INFORMATION updated 7/7 NTB17-003D