Lexus Es 350 2011

• Recall 144361 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2010-2016 4runner, 2003-2006 tundra, 2003-2013 corolla, 2009-2010 corolla matrix, 2004-2005 rav4, 2002-2007 sequoia, 2011-2013 sienna, 2008-2012 scion xb, 2008-2009 lexus is-f, 2007-2012 yaris and lexus es350, 2010-2017 lexus gx460, 2002-2010 lexus sc430, 2006-2012 lexus is250 and is350 and 2010-2015 lexus is250c and is350c vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began november 20, 2019. Owners may contact toyota customer service at 1-888-270-9371 or lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are j0a, j0b, and j0c. Lexus' numbers for this recall are jli, jlj, and jlk.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 119389 [USA]: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Toyota motor engineering & manufacturing (toyota) is recalling certain model year 2008-2011 scion xb and lexus is f, 2009-2011 toyota corolla and corolla matrix, 2006-2011 toyota yaris, lexus is250 and lexus is350, 2010-2011 toyota 4runner, lexus is250c, lexus is350c and lexus gx460, 2011 sienna, 2007-2011 lexus es350, and 2009-2010 pontiac vibe vehicles, originally sold, or ever registered, in alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.S. Virgin islands, or "zone a." additionally, unless included in "zone a" above, toyota is recalling certain model year 2008 scion xb and lexus is f, 2007-2008 toyota yaris, 2006-2008 lexus is250 and lexus is350 and 2007-2008 lexus es350 vehicles, originally sold, or ever registered, in arizona, arkansas, delaware, district of columbia, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia, and west virginia, or "zone b." vehicles of these model years and models that were not originally sold or ever registered in either zones a or b are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
  toyota will notify the toyota and lexus owners. General motors will contact the pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on december 6, 2016. Owners may contact toyota customer service at 1-800-331-4331. Toyota's numbers for interim notification for this campaign are g1p (toyota zone a), g1r (toyota zone b), g2g (lexus zone a), and g2h (lexus zone b). Toyota's numbers for final remedy for this campaign are g0p (toyota zone a), g0r (toyota zone b), glg (lexus zone a), and glh (lexus zone b).
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 2021723 [Canada]: Accessories
  Issue: this recall is for certain block heater kits installed on certain vehicles or sold as accessories at toyota or lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: this recall only affects the following block heater/cord part numbers: C014003034 pk5a408j09 pU14000904 C014003151 pk5a408j13 pU14000905 C014000885 pk5a489j11 pU14000907 C014000888 pk5a489j22 pU14000909 C014000907 pk5a410h00 pU14000911 C014100904 pU14000900 pU14000913 C014100907 pU14000901 pU14003571 C014100911 pU14000902 pk5a408j05 pU14000903 safety risk: engine block heater wiring that overheats or melts could create the risk of a fire. Corrective actions: toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

  Show Content

• Recall 2019008 [Canada]: Airbag
  Issue: on certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety risk: if the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective action: owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: the canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

Tl* the contact owned a 2011 lexus es350. The contact stated that while her son was driving at 70 mph, without warning an abnormal noise was heard coming from the passenger wheel and within seconds he lost control of the vehicle crashing into a ditch and flipping over. The driver depressed the brake pedal as the vehicle slid on the wet roadway due to the rain. The driver was ejected from the vehicle thru the windshield as the air bags failed to deploy. The driver sustained a broken hip and face laceration as he was transported to the hospital by ambulance. A police report was made. The insurance company was contacted and towed the vehicle to a lot where it was deemed a total loss. No dealer was contacted. The manufacturer was made aware of the failure as a claim was filed. However no further assistance was taken. The failure mileage was approximately 89,000. *dt

Tl* the contact owned a 2011 lexus es350. The contact stated that while her son was driving at 70 mph, without warning an abnormal noise was heard coming from the passenger wheel and within seconds he lost control of the vehicle crashing into a ditch and flipping over. The driver depressed the brake pedal as the vehicle slid on the wet roadway due to the rain. The driver was ejected from the vehicle thru the windshield as the air bags failed to deploy. The driver sustained a broken hip and face laceration as he was transported to the hospital by ambulance. A police report was made. The insurance company was contacted and towed the vehicle to a lot where it was deemed a total loss. No dealer was contacted. The manufacturer was made aware of the failure as a claim was filed. However no further assistance was taken. The failure mileage was approximately 89,000. *dt

The dashboard is melting which results in the noxious chemical smell and adhesive compound that is sticky to the touch.

The dashboard is melting which results in the noxious chemical smell and adhesive compound that is sticky to the touch.

This web site (the nhtsa) says there is no recall on this vin, but toyota/lexus site says there is, for the airbags. This misleading information on a government web site can be dangerous.

N/a

Supplemental restraint system (srs) warning light is illuminating on instrument panel and does not go out when car is started and driven.

The leather on both driver and passenger seats have failed and split, deteriorated and the leather on the armrest between seats have deteriorated.

Takata recall - no incident yet

Common OBD-II Error Codes

• C0140 [1] C0140
• C0141 [1] C0141
• U1400 [1] U1400