2016 MACK Granite (gr)Mack Granite (gr) 2016

Vehicle Details: Recalls, Investigations, Service Bulletins

Below you will find all available information on the 2016 MACK Granite (gr).

ManufacturerKnown WMI(s)Fuel Type
MACK
MACK VIN Decoder

Use the box here to look up VINs from MACK as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2016 MACK Granite (gr)?
     - There are 1 recall(s) for the 2016 MACK Granite (gr), additional information is below.
NHTSA Mandated Recalls
  • Recall 244939 [USA]: Low turn signal visibility may not alert other drivers to a turning vehicle, increasing the risk of a crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • CBR-1008 202404 - POWER TRAIN: Cbr: equipped with an automated manual transmission model d or f ( amt-d, amt-f, mdrive) missing x1 value in vda and default settings guidelines, parameterp1aob; fault code P1052-54, error 40,or error 18 encountered during clutch or tran.
  • CBR-2350 202402 - ELECTRICAL SYSTEM: Cbr -telematics gateway (tgw) connect ability issues
  • CBR-2347 202402 - ELECTRICAL SYSTEM: Cbr - active "set park brake" message on drivers information display (did).
  • CBR-202 202402 - POWER TRAIN: Cbr - automated manual transmission ( amt ) flywheel pilot bearing wear on input shaft.
  • CBR-2014 202402 - SUSPENSION: Cbr - driveline noise, suspension ride height too high, suspension will not exhaust - chassis built 2016w01 and newer.
  • CBR-2333 202401 - ELECTRICAL SYSTEM: Cbr: tgw will not connect after sim card replacement
  • CBR-2016 202401 - SUSPENSION: Cbr: frame or cab lean
  • CBR-2320 202312 - ENGINE AND ENGINE COOLING: Cbr: for vehicles equipped with an 11l engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
  • M-465-001 202311 - POWER TRAIN: Tsb: mack trucks now offer an improved hd inter-axle through shaft for the crd 125, 150, 180, and 200 family carriers. The new hd shaft went into production on january 23rd, 2023 for 2.54 - 3.50 axle ratios and april 1st, 2023 for 3.56 - 3.
  • CBR-206 202310 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Cbr: vehicle speed factor (k-factor) programming - speed factor value incorrect when calculated in premium tech tool (ptt); speedometer reading incorrectly following a change to vehicle speed factor - us17+obd16 and newer emissions, common
  • M-258-014 202309 - ENGINE AND ENGINE COOLING: Tsb: aftertreatment diesel exhaust fluid (def) tank, level sensor, replacement
  • M728-005A 202308 - SUSPENSION: Tsb: barksdale leveling valve, leak test
  • M-141-001 202308 - ENGINE AND ENGINE COOLING: Tsb: air restriction indicator
  • CBR-2112 202307 - ENGINE AND ENGINE COOLING: Cbr: programming failure - chassis with cummins engine and an allison transmission
  • CBR-2303 202307 - ENGINE AND ENGINE COOLING: Cbr: mack def dosing valve diagnostic trouble codes (dtc) P202D00, P208E00, P103B00 - us10+obd13 and newer emissions
  • KC-2292 - SUSPENSION: Vehicles equipped with chalmers suspension - frame bracket hardware loose or interfering
  • KC-2116 Rev 9 - ENGINE AND ENGINE COOLING: Mack nox sensor troubleshooting guide - us10+obd13 and newer emissions
  • KC-2116 Rev 8 - ENGINE AND ENGINE COOLING: Mack nox sensor troubleshooting guide - us10+obd13 and newer emissions
  • KC-2158 Rev 6 - ENGINE AND ENGINE COOLING: Cbr - mack selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
  • SLM23-005 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Service literature published and released in may, 2023
  • KC-503-Ver3 - POWER TRAIN: Cbr: automated manual transmission ( amt ) -transmission electronic control unit ( tecu ) mid130 psid 29 fmi 7 /P10AE81 fault codes being generated
  • KC-2229-Ver2 - POWER TRAIN: Cbr: automated manual transmission (amt) transmission kickdown mode
  • KC-474-Ver5 - POWER TRAIN: Cbr: diagnostic trouble code (dtc) P215A-64, fault code spn 84 fmi 19
  • KC-2266 - ELECTRICAL SYSTEM: Cbr: mack granite - diagnostic trouble code (dtc) P208464
  • KC-2264 - ELECTRICAL SYSTEM: Cbr: mack chassis - allison reduced engine load at a stop (rels) diagnostic trouble code P071A or P07CE - gr,te,lr models - non-split/drop box pto
  • KC-2269 - ENGINE AND ENGINE COOLING: Cbr: 11l engines, non-common rail - air compressor coolant pipe, parts substitution - us14+obd13 to us14+obd16
  • M-256-001 - ENGINE AND ENGINE COOLING: New tsb for air cleaner housing repair
  • S7627 - ENGINE AND ENGINE COOLING: Mack mmd alternator pulley
  • KC-2254 - ELECTRICAL SYSTEM: Mack chassis - no gauge cluster backlight
  • KC-2165 - ENGINE AND ENGINE COOLING: Mack def pump troubleshooting guide - us10+obd13 and newer emissions
  • KC-2248 - ENGINE AND ENGINE COOLING: Flywheel housing thread repair
  • KC-2253 - SUSPENSION: Barksdale height control valve troubleshooting guide
  • KC-306 - POWER TRAIN: Diagnostic trouble code ( dtc ) P10AE logged in tecu with active or inactive status, fault code cannot be cleared; possibly accompanied by P105817 and P105818 - us10+obd13 and newer emissions (16-pin diagnostic connector), commonly model ye
  • KC-2253 - SUSPENSION: Barksdale height control valve troubleshooting guide
  • KC-2165 - ENGINE AND ENGINE COOLING: Mack def pump troubleshooting guide - us10+obd13 and newer emissions
  • KC-859 - ELECTRICAL SYSTEM: Mack chassis - fault code list / engine control module (ecm), aftertreatment control module (acm), electrical system version 4 diagnostic trouble codes (dtc) model year 2013 - 2017
  • KC-365 - EQUIPMENT:MECHANICAL:INTEGRATED JACK/LEVELER/STABILIZER: Mack chassis - technical service bulletin m-728-005, leveling valve, leak test, air leaks from the leveling valve after the vehicle is parked (shut off)
  • KC-826 - ENGINE AND ENGINE COOLING: Volvo chassis - crankcase ventilation ( ccv ) oil leaks - technical service bulletin m-257 - 004, technical service bulletin m-257 - 006 - us14 and us15 emissions
  • KC-257 - EQUIPMENT: Volvo chassis - fsb 237 - 020, unit injector yoke hold - down bolt torque specification
  • KC-561 - ENGINE AND ENGINE COOLING: Engine oil analysis specifications - us10 and newer emissions
  • KC-552 - ENGINE AND ENGINE COOLING: Aftertreatment control module ( acm ) diagnostic trouble codes ( dtc ) U0001-88 and U0010-88 lighting the malfunction indicator lamp ( mil ); possible derate warning ⿿ us10 and newer chassis
  • KC-495 - ELECTRICAL SYSTEM: Intake pre-heater electrical schematics (diagrams) - us10+obd13, us14+obd13 to us14+obd16 emissions
  • KC-492 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV): Diagnostic trouble code (dtc) P04DB - crankcase ventilation disconnected; us10+obd13 to us14+obd16 emissions
  • KC-2157 - UNKNOWN OR OTHER: Aftertreatment hydrocarbon injector (ahi) troubleshooting guide - us10+obd13 and newer emissions
  • KC-505 - ENGINE AND ENGINE COOLING: Mack chassis - fsb 284 - 068, exhaust particulate sensor, repair ( 2016 vehicles )
  • KC-478 - ENGINE AND ENGINE COOLING: Variable geometry turbocharger ( vgt ) function test ( 2551-08-03-02 ), obd13 model year ( my ) 2014 and newer
  • KC-450 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Diagnostic trouble codes ( dtc ) P20EE, P207F and P103C, diagnostic procedure - replaces guided diagnostics in premium tech tool ( ptt ) - us10+obd2013 to us14+obd2016 (non-common rail) emissions, commonly model years 2014 to 2017
  • KC-415 - ENGINE AND ENGINE COOLING: Diagnostic trouble code ( dtc ) P26E8 intermittently lighting the malfunction indicator lamp ( mil ); possible derate warning - us10+obd13 and newer emissions, model year 2014 and newer
  • KC-401 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Diagnostic trouble codes (dtc) P24F600 or P24F700 - us14+obd15 emissions and newer, model year 2016 and newer
  • KC-402 - UNKNOWN OR OTHER: Volvo chassis - diagnostic trouble code (dtc) sa 0 fmi 0 or spn 0 fmi 0 present on fault code readout - us10 and newer emissions, model year 2011 and newer
  • KC-354 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Volvo chassis - certain volvo trucks built after january 11, 2016 may experience an issue with the instrument cluster display
  • KC-361 - SERVICE BRAKES, AIR: Mack chassis - drive axle brake chamber rubbing frame or brake drum - vehicles built between 7 july 2014 and 23 august 2019
  • KC-351 - ENGINE AND ENGINE COOLING: Mack chassis - granite models (gu, gr) - revised fan ring design; engine cooling fan ring cracked at welds - model years 2016 to 2020
  • KC-322 - ENGINE AND ENGINE COOLING: Mack chassis - diagnsotic trouble code P026D-00, fuel injection quantity higher than expected; diagnosis and information - us14+obd15 emissions, model year 2016
  • KC-297 - EXTERIOR LIGHTING: Mack chassis - adding snow plow lights - parameter and variant changes
  • GDC21-011 - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR: Exhaust gas temperature sensor circuit range/performance
  • KC-286 - UNKNOWN OR OTHER: Mack chassis - fsb 563-008 plugs, pressure protection manifold - new brass plugs for noregon pressure protection manifold (ppm)
  • KC-253 - FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM: Mack chassis - fsb 237 - 020, unit injector yoke hold - down bolt torque specification
  • KC-251 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble code ( dtc ) P249C intermittently lighting the malfunction indicator lamp ( mil ) - us14+obd15 and us14+obd16 (non-common rail fuel system) emissions, common model years 2016 and 2017
  • KC-247 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE: Mack chassis - diagnostic trouble codes ( dtc's ) P24A0 and P249F lighting the malfunction indicator lamp ( mil ) - us14+obd15, us14+obd16 (common model years 2016 and 2017), us17+obd16 and newer ( common rail fuel system, model year 2018)
  • KC-238 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Mack chassis - where to find the body builder portal - body builder manual ( bbm ) information - us04 and newer emissions, model year 2008 and newer
  • KC-998 - ENGINE AND ENGINE COOLING: Diagnostic trouble code (dtc) U3017 - obd2015/16 model year ( my ) 2016/2017 vehicles
  • KC-785 - ELECTRICAL SYSTEM: ** tech tip ** - tt - 008 - 2016 - d16d, d16h, d16j & mp10 accessory belt tensioner improvement
  • KC-779 - ENGINE AND ENGINE COOLING: Diagnostic trouble code (dtc) P0201 to P0206 fmi 13 - obd2015 hde 11 ( model year 2016 truck )
  • KC-167 - ENGINE AND ENGINE COOLING: Premium tech tool (ptt) error code 43: service regeneration fails to start; service regen does not complete with error 43 displayed - us10+obd13 and newer emissions, common model year 2014 and newer
  • KC-164 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble code ( dtc ) P0422 lighting the malfunction indicator light ( mil ) - us14+obd15 and us14+obd16 emissions, common model years 2016 and 2017
  • KC-163 - FUEL SYSTEM, DIESEL: Diesel fuel information - acceptable biodiesel, fuel blend for summer and winter - us07 and newer emissions, model year 2008 and newer
  • KC-145 - POWER TRAIN: Automated manual transmission (amt) (spigot bearing) input shaft repair kit and shim kit, part number information, reference guide - us07 and newer emissions, model year 2008 and newer
  • KC-119 - POWER TRAIN: Mack chassis - equipped with an automated manual transmission (mdrive, amt) amt-c, amt-d or amt-f - transmission oil specifications - model years 2010 to 2020
  • KC-73 - EQUIPMENT: Mack chassis - disabling the driver id; removing the driver id prompt - us07 to us14+obd16 emissions, model years 2008 to 2017
  • KC-70 - STRUCTURE:BODY:HOOD: Mack chassis - model gr/gu - hood warpage
  • KC-799 - ENGINE AND ENGINE COOLING: * revised * how and when to diagnose a us14 / us15 emissions P2463 diagnostic trouble code ( dtc )
  • KC-692 - EXTERIOR LIGHTING:LIGHTING CONTROL MODULE: Lighting control module ( lcm ) replacement - refer to technical parts information ( tpi ) 364 - 034 control unit
  • KC-136 - ENGINE AND ENGINE COOLING: Aftertreatment control module (acm) offline/not visible/missing from control unit information in premium tech tool (ptt) - us10+obd13 and newer emissions
  • KC-130 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM): Air in the fuel system tests, common rail fuel system - us17+obd16 and newer emissions
  • KC-124 - POWER TRAIN: Automated manual transmission gearbox will not shift to high range after gearbox repair; mid 130 psid 24 fmi 1, P1072-92 unintentional disengagement of high range - us07 and newer emissions, model year 2008 and newer
  • KC-115 - POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS: Automated manual transmission ( amt ) ( i-shift, mdrive ) equipped chassis, obd13 and newer - light turbo surge ( chuff ) during skip shifting
  • FSB 211-003_M - ENGINE AND ENGINE COOLING: Valve cover oil leak at t joint
  • KC-116 - UNKNOWN OR OTHER: Mack chassis - equipped with an automated manual transmission ( amt, mdrive ) - transmission grinding when downshifting following installation of a reman transmission or range assembly; range synchronizer (synchro) timing procedure - us07 a
  • KC-112 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE: Mack chassis - diagnostic trouble code ( dtc ) P05EB, diagnostic and repair information - us14+obd15 and us14+obd16 (commonly model years 2016 and 2017)
  • KC-70 - STRUCTURE: Mack chassis - model gr/gu - hood warpage
  • CBR-15 - ENGINE AND ENGINE COOLING: Diagnostic trouble codes (dtc) for the engine pre-heat relay: supplementary instructions
  • KC-345 - STEERING: Mack chassis - models gu / gr - constant correction to center
  • FSB 237-021v2 - FUEL SYSTEM, DIESEL: Revision: valve, common rail, removal
  • FSB 491-032 - EQUIPMENT: Transmission oil cooler hose, replacement
  • FSB 237-021 - FUEL SYSTEM, DIESEL: Valve, common rail, removal
  • KC-70 - STRUCTURE: Mack chassis - model gr/gu - hood warpage
  • FSB 491-032 - POWER TRAIN: Transmission oil cooler hose, replacement
  • KC-2021 - WHEELS:HUBCAP/COVER: Mack chassis - stemco hubcap plug will not stay in
  • K53338075 - ENGINE AND ENGINE COOLING: Diagnostic trouble codes (dtc) for the engine pre-heat relay: supplementary instructions - us10+obd13 and newer emissions, model year 2014 and newer
  • K31126441 - STRUCTURE:BODY:HOOD: Diagnostic trouble code (dtc) P2042-01: diagnostic instructions - us17+obd16 emissions and newer
  • K56735181 - SERVICE BRAKES, AIR: (back office) mack chassis - grade gripper reactivates after timeout with brake pedal released - vehicles manufactured prior to 2018
  • FSB 233-007 - EQUIPMENT ADAPTIVE/MOBILITY: Fuel filter housing, replacement
  • K09201017 - EQUIPMENT ADAPTIVE/MOBILITY: Correct aftermarket installation of permanent electronic log devices ( eld )( qualcomm, peoplenet, omnitracs, gps, location tracker, etc.) rP1226 connection on the data link; installation instructions and information for third party ( after
  • K88992892 - ENGINE (PWS): Assembled camshaft - injector lobe rotation inspection for possible spun camshaft lobe; diagnostic trouble codes (dtc) P0257-00, P2A17-00, or P2A1F-00, possible lack of power - us17+obd16 and newer emissions
  • K70570342 - POWER TRAIN: Mack chassis - equipped with an allison transmission: enable 6th speed - all emissions, all model years
  • K63001042 - VISIBILITY: Mack chassis - snm16 - 015 updated wiper mechanism for one piece windshield; windshield wipers leaving streaks or not clearing center of windshield
  • K41392514 - POWER TRAIN:DRIVELINE:DRIVESHAFT: Mack chassis - drive axle brake chamber rubbing frame or brake drum - vehicles built between 7 july 2014 and 23 august 2019
  • K65527708 - EQUIPMENT: Diagnostic trouble codes (dtc) P20EE and P103C, diagnostic procedure; replaces guided diagnostics in premium tech tool ( ptt ) - us17+obd16 and newer chassis only
  • FSB728-005 - SUSPENSION: Leveling valve, leak test
  • K86900043 - ENGINE AND ENGINE COOLING: Exhaust gas recirculation (egr) system - fault codes spn 412 fmi 0,2,5; diagnostic trouble codes (dtc) P040A, P040B, P1121 - temperature sensor inspection
  • K27230737 - ENGINE (PWS): Mack chassis - granite models (gu, gr) - revised fan ring design; engine cooling fan ring cracked at welds - model years 2016 to 2020
  • K36763734 - ENGINE (PWS): 13l engines - high engine oil pressure, frequently accompanied by P0521-64 oil pressure sensor - plausibility fault
  • K65527708 - ENGINE (PWS): Diagnostic trouble codes (dtc) P20EE and P103C, diagnostic procedure; replaces guided diagnostics in premium tech tool ( ptt ) - us17+obd16 and newer chassis only
  • K63879541 - EQUIPMENT:ELECTRICAL: Unable to retrieve "on request" messages for peoplenet or omnitracs modules installed on the dl5 data link; third party electronic log device not reporting certain data
  • K73535038 - ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS: Mack chassis - equipped with a cummins 9 liter engine - serpentine belt excessively worn or damaged; fan belt shredding or fraying repeatedly
  • K52535491 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Diagnostic / troubleshooting procedures for egr system components; diagnostic trouble codes (dtc) P0401-00, P0402-00, P04DD-00, P1121-00, P1121-98 or spn 2659 fmi 16, spn 2659 fmi 18, spn 412 fmi 0, spn 412 fmi 15 - us10, us10+obd13, us14+o
  • FSB563-008 - ENGINE (PWS): Plugs, pressure protection manifold
  • FSB563-008 - EQUIPMENT ADAPTIVE/MOBILITY: Plugs, pressure protection manifold
  • K71313015 - STRUCTURE:BODY:HOOD: Hood insulation separating from hood, insulation installation instructions
  • U106 - BACK OVER PREVENTION: Mack has determined that certain vehicles equipped with a model year (?My?) 2016 mp8 engines may be equipped with particulate matter (pm) sensor that may not fulfill expected performance criteria pertaining to the life expectancy of a pm se
  • K15194127 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Mack chassis - fault code sid 158 fmi 0 logging in instrument cluster ( mid 140, ic ), no code description or diagnostic information
  • K17039050 - ELECTRICAL SYSTEM: Bendix acom - ec80 esp controller; abs and atc lights illuminated, fault codes present after making changes, calibration or programming with acom
  • FSB728-005 - ENGINE (PWS): Leveling valve, leak test
Known Recall Investigations
  • Mdrive transmission failure to disengage investigation # PE20005

    On april 28, 2020, the office of defects investigation (odi) opened pe20-005 to investigate reports of 2013-2015 mack chu and cxu trucks equipped with mdrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover my 2013-2016 vehicles. The mdrive transmission is macks version of volvos i-shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early i-shift transmissions were recalled (13v-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although macks mdrive transmission adopted the latest volvo i-shift design and was built with the redundant clutch switch, odi received field reports alleging that the mdrive transmission would not disengage when coming to a stop like the volvo i-shift transmissions in recall 13v-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, odi was able to correlate two versions of transmission software (id 23084009 and id 23084004), with two frequently replaced parts (solenoid valve and cylinder assy clutch) as outliers. However, mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to mack, unlike the i-shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled volvo i-shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, odi concludes that the mack vehicles do not present an unreasonable risk to motor vehicle safety. Although odi is closing this pe, mack/volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist. Claims are still being submitted and the agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.