2003 CHEVROLET C-SERIESChevrolet C-series 2003

Vehicle Details: Service Bulletins

Below you will find all available information on the 2003 CHEVROLET C-SERIES, manufacturered by General Motors Llc.

ManufacturerKnown WMI(s)Fuel Type
CHEVROLET1G8 1GA 1GB 1GC 2GA 2GB 2GC 3GB
CHEVROLET VIN Decoder

Use the box here to look up VINs from CHEVROLET as well as other manufacturers

#

Sub-models: - C Series C7 7500 -

Frequently Asked Questions
  • Where is the 2003 CHEVROLET C-SERIES produced?
     - The 2003 CHEVROLET C-SERIES is produced in Warren Michigan, United States (usa).
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 18-NA-099 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This bulletin provides information for use on a product assistance claim (pac), which is formerly known as a product allegation resolution (par) claim.
  • PI1394B - ENGINE AND ENGINE COOLING: This pi bulletin advises the technician on the proper way to install the pistons in an engine.
  • 02-08-42-001J - EXTERIOR LIGHTING: This informational bulletin provides information for dealers/technicians on headlamp, tail lamp, license lamp or fog/driving lamp damage.
  • Recalls - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Vehicle recalls
  • PIT4864F - EQUIPMENT: Information on requests to add onstar bluetooth option.
  • 23-NA-219 - EQUIPMENT: This service bulletin provides information on concerns or questions regarding installation of dealer installed accessories.
  • PIT5264B - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Canadian customers unable to place calls and turn by turn inoperative in the united states.
  • WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
  • 17-NA-170 - WHEELS: This service bulletin provides information about the hunter wheel road force balancers that should be utilized for all repairs requiring balance and road force measurement.
  • 07-08-49-020R - ELECTRICAL SYSTEM: This informational bulletin provides information for the ipc odometer programming method quick reference guide.
  • 23-NA-153 - ENGINE AND ENGINE COOLING: The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
  • 18-NA-073 - ENGINE AND ENGINE COOLING: This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
  • 03-06-01-023G - ENGINE AND ENGINE COOLING: This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
  • 19-NA-219 - ENGINE AND ENGINE COOLING: This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
  • 17-NA-170 - WHEELS: This service bulletin provides information about the hunter wheel road force balancers that should be utilized for all repairs requiring balance and road force measurement.
  • 19-NA-219 - ENGINE AND ENGINE COOLING: This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
  • 22-NA-009 - ENGINE AND ENGINE COOLING: This service bulletin provides service information on new torque specification and installation procedure for acdelco spin-on oil filters.
  • 17-NA-073 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
  • 01-08-42-001O - EXTERIOR LIGHTING: This service bulletin provides information for dealers/technicians on exterior lamp condensation and water leaks and replacement guidelines.
  • 09-00-89-008F - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This warranty administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the personal property damage process.
  • 21-NA-124 - ENGINE AND ENGINE COOLING: This service bulletin provides diagnostic tips/steps on testing for possible evap leaks in the system to correct a customer concern of an mil illuminated with dtcs P0442 and/or P0455 set.
  • PIT3271N - TIRES: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • 22-NA-074 - ENGINE AND ENGINE COOLING: This service bulletin provides service information to technicians on guidelines to replace oil cooler, oil cooler lines and oil tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
  • 22-NA-205 - ELECTRICAL SYSTEM: This service bulletin provides information on module harvesting.
  • 22-NA-195 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This service bulletin provides information on handling requests for modifications to permanently import/export vehicles between the u.S. And canada.
  • 22-NA-009 - ENGINE AND ENGINE COOLING: This service bulletin provides service information on new torque specification and installation procedure for acdelco spin-on oil filters.
  • 06-00-89-031H - ENGINE AND ENGINE COOLING: This service bulletin provides information on oem and remanufactured engine and automatic transmission/transaxle identification.
  • 22-NA-181 - POWER TRAIN: This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
  • 20-NA-065 - ENGINE AND ENGINE COOLING: This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of mil illuminated with multiple fuel trim and/or oxygen sensor codes set.
  • 22-NA-009 - ENGINE AND ENGINE COOLING: This service bulletin provides service information on new torque specification and installation procedure for acdelco spin-on oil filters.
  • 000090002L - TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS: This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of gm cars and trucks.
  • 18-NA-099 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This bulletin provides information for use on a product assistance claim (pac), which is formerly known as a product allegation resolution (par) claim.
  • 22NA009 - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN: This service bulletin provides service information on new torque specification and installation procedure for acdelco spin-on oil filters.
  • 03-06-01-023E - ENGINE AND ENGINE COOLING: This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
  • PIT3271M - WHEELS: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • 22-NA-074 - ENGINE AND ENGINE COOLING: This service bulletin provides service information to technicians on guidelines to replace oil cooler, oil cooler lines and oil tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
  • 22-NA-009 - ENGINE AND ENGINE COOLING: This service bulletin provides service information on new torque specification and installation procedure for acdelco spin-on oil filters.
  • 15-NA-079 - COMMUNICATION:MANUFACTURER TELEMATICS: Onstar voice fallback number update
  • 06-00-89-031D - ENGINE (PWS): Oem and remanufactured engine and automatic transmission/transaxle identification
  • 010842001N - EXTERIOR LIGHTING: This service bulletin provides information for dealers/technicians on exterior lamp condensation and water leaks and replacement guidelines.
  • 100089006H - EQUIPMENT: This service bulletin provides information for dealers on how to submit a product information report (pir) (canada only).
  • 21NA124 - FUEL SYSTEM, GASOLINE:STORAGE:EVAPORATIVE EMISSIONS:CANISTER: This service bulletin provides diagnostic tips/steps on testing for possible evap leaks in the system to correct a customer concern of an mil illuminated with dtcs P0442 and/or P0455 set.
  • 21NA124 - ELECTRICAL SYSTEM: This service bulletin provides diagnostic tips/steps on testing for possible evap leaks in the system to correct a customer concern of an mil illuminated with dtcs P0442 and/or P0455 set.
  • PIP5358A - EQUIPMENT: This preliminary information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the
  • PIP5640A - WHEELS: This preliminary information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an
  • 18NA099 - EQUIPMENT: This bulletin provides information for use on a product assistance claim (pac), which is formerly known as a product allegation resolution (par) claim.
  • PI0281D - EQUIPMENT ADAPTIVE/MOBILITY: Underbody component corrosion the following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some fo
  • PI0281D - EQUIPMENT ADAPTIVE/MOBILITY: Underbody component corrosion the following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some fo
  • 99-08-51-007F - EQUIPMENT ADAPTIVE/MOBILITY: Refinishing aluminum wheels this bulletin updates general motor's position on refinishing aluminum wheels. Gm does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the whe
  • 99-08-51-007F - EQUIPMENT ADAPTIVE/MOBILITY: Refinishing aluminum wheels this bulletin updates general motor's position on refinishing aluminum wheels. Gm does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the whe
  • 15-NA-079 - EQUIPMENT: Onstar voice fallback number update some customers may have received a letter from onstar stating that "we recently tried to provide a software update to the onstar hardware in your vehicle. However, your system could not be updated r
  • PIP5163E - FUEL SYSTEM, GASOLINE: This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
  • PIP5540G - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP5725A - EQUIPMENT: This preliminary information communicates theuse of winter grade fuel during the warm months of 2020 and the potential rivabilityissues that it can cause. The ongoing coronavirus (covid-19) pandemic has caused significant reductions in
  • 150089004B - SUSPENSION:REAR:SHOCK ABSORBER: Information regarding the differences between fluid leakage and seepage this bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to un
  • 070849020M - ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT: Ipc odometer programming method quick reference guide
  • PIT3271K - WHEELS: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • PIP5628C - ENGINE AND ENGINE COOLING: This preliminary information communicates information that will need to be provided to tac to aid in diagnosing if a vehicle comes in with misfire and dtc codes P0300 - P0308 and/or P050D
  • 18NA099 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This bulletin provides information for use on a product assistance claim (pac), which is formerly known as a product allegation resolution (par) claim.
  • PIP5226D - ENGINE (PWS): This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is
  • PIT5099E - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: This preliminary information communication provides information to the technician about vehicles that the heater-vent-air conditioning blows warm air. Before calling general motors technical assistance center technician will need to have hi
  • PIC5453D - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This preliminary information communication provides information to the technician that general motors and general motors of canada company do not support cross border sales. The general motors of canada customer care centre is the sole auth
  • PIC5453C - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This preliminary information communication provides information to the technician that general motors and general motors of canada company do not support cross border sales. The general motors of canada customer care centre is the sole auth
  • 070849020Q - ELECTRICAL SYSTEM: This informational bulletin provides information for the ipc odometer programming method quick reference guide.
  • 030601023D - ENGINE (PWS): This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
  • 16NA383 - ENGINE (PWS): This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, crank no start, extended crank or misfire, mil with dtcs, and explains how top tier fuels shou
  • PIP5628B - ENGINE (PWS): This preliminary information communicates information that will need to be provided to tac to aid in diagnosing if a vehicle comes in with misfire and dtc codes P0300 - P0308 and/or P050D
  • PIP5725 - FUEL SYSTEM, GASOLINE: This preliminary information communicates theuse of winter grade fuel during the warm months of 2020 and the potential rivabilityissues that it can cause. The ongoing coronavirus (covid-19) pandemic has caused significant reductions in
  • PIT3099T - EQUIPMENT: This preliminary information communication provides information to the technician about installing general motors accessory parts/kits. Technicians shouldrefer to service information for information regarding most accessories. Technician
  • 16NA383 - EQUIPMENT ADAPTIVE/MOBILITY: This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, crank no start, extended crank or misfire, mil with dtcs, and explains how top tier fuels
  • PIP4723D - ELECTRICAL SYSTEM: This preliminary information communicates to the dealer the process for downloading or updating operating software for the tire pressure monitor, active fuel injector tester, multi media tester, pico scope, gr8 starting/charging tester and
  • PIP5540F - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • 100089009D - EQUIPMENT ADAPTIVE/MOBILITY: This informational bulletin provides information on key code security rules and information on gm keycode look-up applications.
  • 010842001M - LIGHTING (PWS): This informational bulletin provides information for dealers/technicians on exterior lamp condensation and replacement guidelines.
  • PIT3271J - WHEELS: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • 100089009C - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides information on key code security and information on gm key code look up applications.
  • 100089006G - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides information for dealers how to submit a product information report (pir) (canada only).
  • PIP5540E - ENGINE (PWS): This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP5601A - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use pico oscilloscope di
  • PIT3099S - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about installing general motors accessory parts/kits. Technicians shouldrefer to service information for information regarding most accessories. Technician
  • PIT3099R - EQUIPMENT: This preliminary information communication provides information to the technician about installing general motors accessory parts/kits. Technicians shouldrefer to service information for information regarding most accessories. Technician
  • 100845001G - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides information for electrical ground repairs using new general motors replacement fasteners with conductive finish.
  • 16NA383 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
  • PIP5640 - ENGINE (PWS): This preliminary information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an
  • PIP5226C - ENGINE (PWS): This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is
  • PIP4723C - ELECTRICAL SYSTEM:SOFTWARE: This preliminary information communicates to the dealer the process for downloading or updating operating software for the tire pressure monitor, active fuel injector tester, multi media tester, pico scope, gr8 starting/charging tester and
  • PIT5389E - EQUIPMENT ADAPTIVE/MOBILITY: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIT3099Q - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This preliminary information communication provides information to the technician about installing general motors accessory parts/kits. Technicians should refer to service information for information regarding most accessories. Technicians
  • 010842001L - EXTERIOR LIGHTING: This informational bulletin provides information for dealers/technicians on exterior lamp condensation and replacement guidelines.
  • PIP5540B - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP4925B - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detectortools.
  • PIP5540D - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP5628 - ENGINE AND ENGINE COOLING: This preliminary information communicates information that will need to be provided to tac to aid in diagnosing if a vehicle comes in with misfire and dtc codes P0300 - P0308 and/or P050D
  • PIT5353C - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This preliminary information communication provides information to the technician about what xm offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific xm offerings and availabilit
  • 10-08-110-001B - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides information on how to use floor mats.
  • 10-00-89-006E - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This information bulletin provides the dealers on how to submit a product information report.
  • 02-00-89-002N - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides additional information to the technicians and how to submit a field product report.
  • PIP5601 - EQUIPMENT: This preliminary information communicates
  • PIT5099D - EQUIPMENT:APPLIANCE:AIR CONDITIONER: This preliminary information communication provides information to the technician about vehicles that the heater-vent-air conditioning blows warm air. Before calling general motors technical assistance center technician will need to have hi
  • PIP5163D - ENGINE (PWS): This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
  • PIT5099C - EQUIPMENT:APPLIANCE:AIR CONDITIONER: This preliminary information communication provides information to the technician about vehicles that the heater-vent-air conditioning blows warm air. Before calling general motors technical assistance center technician will need to have hi
  • 10-08-110-001B - EQUIPMENT: This informational bulletin provides information on how to use floor mats.
  • 10-00-89-006E - EQUIPMENT: This information bulletin provides the dealers on how to submit a product information report.
  • PIT5399A - EQUIPMENT: This preliminary information communication provides information to the technician about connectivity concerns when connecting an apple device via usb cord. Technician should insure the customer is using an original equipment manufacturer ap
  • 00-06-01-012E - ENGINE (PWS): This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
  • 14-06-04-005 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: This information bulletin advises of a new tool used to aid in installing duramax glow plugs.
  • 00-00-89-027H - EQUIPMENT: This informational bulletin provides information on what products gm has to aid in the eliminating unwanted odors in a vehicle.
  • 10-00-89-006D - EQUIPMENT: This information bulletin provides the dealers on how to submit a product information report.
  • 10-08-45-001E - ELECTRICAL SYSTEM: This informational bulletin updates information on electrical ground repairs using new replacement fasteners with conductive finish.
  • PI1394 - ENGINE AND ENGINE COOLING: This preliminary informational bulletin provides technicians an engine repair tip for installation of pistons.
  • PI1391 - ENGINE AND ENGINE COOLING: This preliminary informational bulletin provides a diagnostic tip for coolant leak at oil cooler inlet pipe o-ring after service engine replacement.
  • 02-07-30-052I - POWER TRAIN: This informational bulletin provides information for automatic transmission oil cooler flow test essential tool j-45096 transflow.
  • 11-00-89-005E - EQUIPMENT: This informational bulletin provides a revision for 11-00-89-005d to add additional mandatory minimum tables and additional information concerning policy decision making.
  • 08-06-01-006D - ENGINE AND ENGINE COOLING: This informational bulletin provides information for engine squealing type noise on start-up or vibration condition.
  • 02-08-98-002D - EQUIPMENT: This informational bulletin provides a revision for 02-08-98-002c to add the 2010-2013 model years and revise the approved refinish materials booklet information.
  • 09-00-89-008A - EQUIPMENT: This informational bulletin provides a revision for 09-00-89-008 to add model years, update the labor operation information and transaction submissions procedure and general content updates.
  • 05-08-48-001C - EQUIPMENT: This informational bulletin provides a revision for 05-08-48-001b to add 2010-2014 model years and update labor operation.
  • 13-00-89-004B - EQUIPMENT: This informational bulletin provides a revision for 13-00-89-004a to include updated information.
  • 06-06-01-007H - ENGINE (PWS): This informational bulletin provides additional information on identifying duramax aftermarket power up devices that may cause damage to the engine and not covered under warranty.
  • PI02003C - EQUIPMENT ADAPTIVE/MOBILITY: This preliminary bulletin provides a diagnostic tip to install a temporary dowl rod to perform an alignment.
  • 13-00-89-004F - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
  • 00-06-01-012E - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
  • 14-06-04-005 - EQUIPMENT ADAPTIVE/MOBILITY: This information bulletin advises of a new tool used to aid in installing duramax glow plugs.
  • 00-00-89-027H - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides information on what products gm has to aid in the eliminating unwanted odors in a vehicle.
  • 10-00-89-006D - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This information bulletin provides the dealers on how to submit a product information report.
  • 10-00-89-017X - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides a list off all the issues revolving around new vehicles for a one stop place to find growing concerns around them.
  • 11-00-89-005C - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This warranty administration bulletin provides information on the clarification of use for dealer empowerment labor operations and customer enthusiasm
  • 08-08-46-004A - EQUIPMENT: This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
  • 08-08-44-015C - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This informational bulletin provides information regarding the inappropriate warranty claims submitted for damaged radios and instrument panel clusters, provides exampls on whats an acceptable for warranty and whats not
  • 00-00-89-027G - EQUIPMENT ADAPTIVE/MOBILITY: This informational bulletin provides a step by step procedure on how to properly use the gm chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
  • 12-03-10-002 - WHEELS: This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
  • 06-00-89-026J - EQUIPMENT: This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the gl
  • 10-00-89-010B - EQUIPMENT: This informational bulletin provides information and rules for gm keycode look up applicationa dn the key code security rules and regulations for canada only.
  • 10-00-89-017W - EQUIPMENT: This informational bulletin provides a list of newly released pi and bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
  • 01-00-89-010J - ENGINE (PWS): This informational bulletin provides a revision for 01-00-89-010i to add the 2013 model year.
  • 10-08-64-002B - EQUIPMENT: This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
  • 13-00-89-004I - EQUIPMENT: This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
  • 05-06-04-035D - FUEL SYSTEM, GASOLINE: This informational bulletin provides the technician with information on what e85 fuel may due to a non e85 vehicle.
  • 13-00-89-004G - EQUIPMENT: This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
  • 00-06-01-012E - EQUIPMENT: This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
  • 14-06-04-005 - ENGINE AND ENGINE COOLING: This information bulletin advises of a new tool used to aid in installing duramax glow plugs.
  • 00-00-89-027H - EQUIPMENT:APPLIANCE:AIR CONDITIONER: This informational bulletin provides information on what products gm has to aid in the eliminating unwanted odors in a vehicle.
  • 10-00-89-006D - EQUIPMENT: This information bulletin provides the dealers on how to submit a product information report.
  • 10-08-110-001B - EQUIPMENT ADAPTIVE/MOBILITY: This informational bulletin provides information on how to use floor mats.
  • 10-00-89-006E - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This information bulletin provides the dealers on how to submit a product information report.
  • PIP5163C - ENGINE (PWS): This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
  • 16-NA-383 - EQUIPMENT: This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
  • 02-06-01-027D - ENGINE AND ENGINE COOLING: This informational bulletin provides information on higher then expected oil consumption.
  • 05-00-89-009A - EQUIPMENT: This informational bulletin describes the availability, technical support and warranty info for the luvw military upfit vehicle-canada only.
  • 00-06-01-012G - ENGINE (PWS): This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
  • 08-08-46-004A - EQUIPMENT: This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
  • 08-08-44-015C - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: This informational bulletin provides information regarding the inappropriate warranty claims submitted for damaged radios and instrument panel clusters, provides exampls on whats an acceptable for warranty and whats not
  • 00-00-89-027G - EQUIPMENT: This informational bulletin provides a step by step procedure on how to properly use the gm chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
  • 12-03-10-002 - WHEELS: This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
  • 06-00-89-026J - EQUIPMENT: This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the gl
  • 10-00-89-010B - EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES: This informational bulletin provides information and rules for gm keycode look up applicationa dn the key code security rules and regulations for canada only.
  • 12-00-89-002A - EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES: This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys
  • 10-00-89-017W - EQUIPMENT: This informational bulletin provides a list of newly released pi and bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
  • 01-00-89-010J - EQUIPMENT: This informational bulletin provides a revision for 01-00-89-010i to add the 2013 model year.
  • 10-08-64-002B - EQUIPMENT: This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
  • 15-08-73-001 - ELECTRICAL SYSTEM: This informational bulletin provides information on communication with onstar module after canadian cellular upgrade.
  • PI02003D - SUSPENSION: This preliminary informational bulletin provides technicians a recommendation for when they are performing a front end alignment and find an alignment dowel pin missing .
  • PIT5099A - EQUIPMENT:APPLIANCE:AIR CONDITIONER: This preliminary information communication provides information to the technician about vehicles that the heater-vent-air conditioning blows warm air. Before calling general motors technical assistance center technician will need to have hi
  • PIP5232A - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: This preliminary information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspe
  • PIT5264A - ELECTRICAL SYSTEM:SOFTWARE: This preliminary information communication provides information to the technician about vehicles that are travelling from canada to the united states. While in the united states they are unable to receive turn-by-turn directions. Due to the
  • PIP5232 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: This preliminary information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspe
  • PIC6036 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This preliminary information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the regular production option code list to verify if t
  • 01-08-42-001J - EXTERIOR LIGHTING: This informational bulletin explains condensation in exterior lights and replacment guidelines for warranty replacement.
  • 02-08-42-001G - EQUIPMENT: This informational bulletin is to assist with the identification of issues that are not considered warrantable.
  • 13-00-89-004H - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This information bulletin provides the technician with additional information on fixing the vehicle right the first time by listing possible concerns to specific vehicles.
  • 11-00-89-005D - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This warranty administration bulletin provide policy information on clarification of use-dealer empowerment labor operations and customer enthusiasm.
  • 10-00-89-017Z - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides information on fix it right for first time issues.
  • 00-03-10-002G - WHEELS: This informational bulletin provides information on the appearance of chromed aluminum wheels due to chemical staining, pitting corrosion and/or spotted.
  • 07-08-49-020H - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: This technical service bulletin provides a revision for 07-08-49-020g to add the 2014 model year and update model list.
  • 070849020M - EQUIPMENT: This informational bulletin provides information for the ipc odometer programming method quick reference guide.
  • 08-08-51-002A - STRUCTURE:BODY: This informational bulletin provides information pre-painting/cleaning process for tpo plastic fascias.
  • 10-00-89-006C - BACK OVER PREVENTION: SENSING SYSTEM: RADAR: This informational bulletin provides directions on submitting different pirs
  • 13-00-89-004E - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This preliminary information bulletin provides a revision of 13-00-89-004d to include updated information.
  • 05-00-89-072C - FUEL SYSTEM, OTHER: This informational bulletin provides information on how to save fuel and proper maintenance without using fuel or oil additives.
  • 13-00-89-005 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This technical bulletin provides warranty administration - new labor codes information.
  • 13-00-89-004A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This technical bulletin provides a revision of 13-00-89-004 to update car issues information for reference information/bulletin pi0746c.
  • 99-04-20-002H - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This technical bulletin provides a revision of 99-04-20-002g to add 2013-2014 model years.
  • 13-00-89-004 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This technical bulletin provides a revision of 10-00-89-017z to include updated information.
  • 10-00-89-010C - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides information on key codes security rules and information on gm key code look up application.
  • 10-00-89-009B - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides information on key code security and information on gm key code look up applications.
  • PIP5226B - ENGINE (PWS): This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is
  • PIT3271H - WHEELS: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • PIP5540A - ENGINE (PWS): This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP5540 - EQUIPMENT: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIT5464 - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicles that the incoming caller id may no longer be available or displayed after the canada onstar upgrade. Dealer should communicate to the customer
  • PIP5325 - FUEL SYSTEM, GASOLINE: This preliminary information communication provides information to the technician to help determine if the vehicle is equipped with factory or aftermarket compressed natural gas, liquefied petroleum gas, or bi-fuel systems. Technician will
  • 06-06-01-007I - FUEL SYSTEM, DIESEL: This informational bulletin provides information to dealership personnel on identifying duramax diesel overpower engine breakdown or non-function due to aftermarket power-up devices vs. Non overpower engine non-function of pistons, cylinder
  • PIC5088E - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This preliminary bulletin provides procedures on how to reset or refresh the xm radio receiver is the customers states that they only get a few channels.
  • 030848006J - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: This informational bulletin provide information for the technicians to repair the rear window defroster contact or tabs.
  • 1008110001C - EQUIPMENT: This information provides the proper way to install the floor mats .
  • 010089010J - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This informational bulletin provides a single point reference and strategy document to aid in reducing customer comebacks, and the possibility of buyback situations by outlining specific guidelines, strategy and forms that will assist with
  • 100089017W - EQUIPMENT: This informational bulletin provides a list of newly released pi and bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
  • 100089010B - EQUIPMENT: This informational bulletin provides information and rules for gm keycode look up applicationa dn the key code security rules and regulations for canada only.
  • 000089027G - EQUIPMENT: This informational bulletin provides a step by step procedure on how to properly use the gm chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
  • 080846004A - ELECTRICAL SYSTEM:SOFTWARE: This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
  • PIP4379M - POWER TRAIN: This preliminary information communication provides information to the technician about vehicles that have not engagement into drive, delayed, no engagement into reverse, and or a range inhibit. Technician may find diagnostic trouble codes
  • PIC5088E - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This preliminary information communication provides information to the technician about vehicles that may not receiving all channels on the xm band. Technician will need to use a scan tool and verify current digital radio receiver status un
  • PIC5588B - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician on the programming and activation of the onstar system. For many 2008 and prior model year gm vehicles, the programming is performed using the tech 2 and the
  • PIP4379L - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicles that have not engagement into drive, delayed, no engagement into reverse, and or a range inhibit. Technician may find diagnostic trouble codes
  • PIC3100F - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: This preliminary information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held gps unit to test the odomete
  • PIT5353B - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This preliminary information communication provides information to the technician about what xm offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific xm offerings and availabilit
  • PIT5399 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about connectivity concerns when connecting an apple device via usb cord. Technician should insure the customer is using an original equipment manufacturer ap
  • PIC4310L - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIC5953A - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that may have an issue when using bluetooth voice recognition with an iphone. Technician should work with the customer to insure the phone cont
  • PIT5264C - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicles that are travelling from canada to the united states. While in the united states they are unable to receive turn-by-turn directions. Due to the
  • PIT3271G - WHEELS: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • PIC3278F - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the cu
  • PIC4310K - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • 11-00-89-005C - EQUIPMENT ADAPTIVE/MOBILITY: This warranty administration bulletin provides information on the clarification of use for dealer empowerment labor operations and customer enthusiasm
  • 10-00-89-017X - EQUIPMENT ADAPTIVE/MOBILITY: This informational bulletin provides a list off all the issues revolving around new vehicles for a one stop place to find growing concerns around them.
  • 09-09-40-001C - SEAT BELTS:FRONT:BUCKLE ASSEMBLY: This informational bulletin provides information to advise dealers about seat belt buckles not operating and/or seat belt warning light illumination, as well as difficulty latching and unlatching the buckle or the buckle release button stic
  • 05-06-04-035E - FUEL SYSTEM, OTHER: This informational bulletin provides dealership personnel with information on flexible fuel vehicles (ffvs) and the usage of e85 fuel in gm vehicles.
  • PIC3718E - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicles may have a no power or no connect concern. Technician will find that the onstar led is red and diagnostic trouble code U1500 is set. Technician
  • PIC5953 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that may have an issue when using bluetooth voice recognition with an iphone. Technician should work with the customer to insure the phone cont
Vehicle Documentation
[pdf] User Manual Owner's Manual
OWNER S MANUAL 1st Edition Owner s Manual Copyright General Motors Corp 2001 The 2003 Chevrolet C Series This manual includes the latest information at time it was printed We reserve right to make changes after that without further notice For vehicles first sold in Canada substitute name of Limited for GM Medium Duty Truck Division whenever appears this Cseries en CA my gm ca chevrolet content dam gmownercenter gmna GMCC dynamic cseries
The 2003 Chevrolet C-Series Owner s Manual 1-1 Seats and Restraint Systems This section tells you how to use your seats and safety belts properly. It also explains the air bag system. 2-1 Features and Controls This section explains how to start and operate your vehicle. 3-1 Comfort Controls and Aud...
lang:en score:44 filesize: 2.46 M page_count: 386 document date: 2001-11-02

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.