2011 IC BUS CE-SCHOOL-BUSIc Bus Ce-school-bus 2011

Complaint Information: Recalls, Investigations, Service Bulletins, Recall Investigations, OBD II Codes

NHTSA Mandated Recalls
  • Recall 151551 [USA]: In the event of a crash, the seat belt may not buckle or properly restrain a passenger in the event of a crash, increasing the risk of an injury.
    Navistar, inc. (navistar) is recalling certain 2011 ic ce transit buses equipped with certain non-retractable passenger two-point lap belts. After long term buckling and unbuckling of the seat belt, the plastic fingers on the male portion of the buckle may crack and fall off, requiring excessive force to buckle the seat belt.
    navistar will notify owners and dealers will replace the seat belt assemblies, free of charge. Navistar issued interim notifications to owners on august 16, 2019. The recall began september 23, 2019. Owners may contact navistar customer service at 1-800-448-7825.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.Nhtsa is missing critical, required information for this safety recall. This information must be supplied through the nhtsa recalls portal within 5 working days of confirming its accuracy:- an identification and description of the risk to motor vehicle safety reasonably related to the defect or noncompliance as described by an increased risk of injury, fire or crash (49 cfr 573.6 (c)(5)).- a description of the manufacturer's program for remedying the defect or noncompliance (49 cfr 573.6 (c)(8)(i)).

  • Recall 151529 [USA]: The seat belt may not easily buckle, increasing the risk of an injury in the event of a crash.
    Navistar, inc. (navistar) is recalling certain 2011 ic bus be, ce, and re school buses equipped with certain non-retractable passenger two-point seat belts. After long term buckling and unbuckling of the seat belt, the plastic fingers on the male portion of the buckle may crack and fall off, requiring excessive force to buckle the seat belt.
    navistar will notify owners and dealers will replace the seat belt assemblies, free of charge. Navistar issued owners an interim notification on august 16, 2019. The recall began september 23, 2019. Owners may contact navistar customer service at 1-800-448-7825.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.Nhtsa is missing critical, required information for this safety recall. This information must be supplied through the nhtsa recalls portal within 5 working days of confirming its accuracy:- an identification and description of the risk to motor vehicle safety reasonably related to the defect or noncompliance, as described by an increased risk of injury, fire or crash (49 cfr 573.6 (c)(5)).- a description of the manufacturer's program for remedying the defect or noncompliance (49 cfr 573.6 (c)(8)(i)).

  • Recall 124048 [USA]: If hot, pressurized coolant suddenly spills into the operator's foot area, there is an increased risk of a burn injury or a crash.
    Navistar, inc. (navistar) is recalling certain model year 2011-2016 ic bus ce transit buses manufactured july 1, 2010, to february 4, 2015, and one ic bus be transit bus manufactured on november 2, 2010. The affected vehicles have a water shutoff valve, inside, forward of driver heater (feature code 48ppj or 48ppp) that has a formed heater hose that over time, may fatigue and split resulting in hot engine coolant fluid leaking into the driver's foot area.
    navistar will notify owners, and dealers will replace the formed heater hose with a more robust one, free of charge. The recall began on january 4, 2017. Owners may contact navistar customer service at 1-800-448-7825. Navistar's number for this recall is 16511.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  • Recall 116060 [USA]: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. this failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
    Navistar, inc. Is recalling certain model year 2007-2015 ic ce transit buses, 2008-2011 ic fe transit buses and 2009-2013 ic re transit buses equipped with certain model s2005, s2010, s5005, s5010, s5505, and s5510 wheelchair lifts by ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
    navistar will notify the purchasers of the lifts, and dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on february 19, 2016. Owners may contact navistar customer service at 1-800-448-7825. Note: these buses and wheelchair lifts were subject to a similar recall in 2014. All vehicles that received that recall remedy are still affected by this recall as well.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  • Recall 109733 [USA]: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. when the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
    Kingmor supply, inc. (kingmor) is recalling certain model year 2006-2014 ic ce school buses manufactured from january 1, 2006, to october 31, 2014, and equipped with certain model s2005, s2010, s5005, s5010, s5505, and s5510 wheelchair lifts manufactured by ricon corporation. The platform side plate of the affected wheelchair lifts may crack.
    kingmor will notify owners and ricon will supply supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on december 18, 2014. Owners may contact kingmor customer service at 1-800-782-4474, or ricon at 1-800-322-2884.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  • Recall 97303 [USA]: In the event of a crash, the seat padding may not properly protect against knee impact force, increasing the risk of injury.
    Navistar, inc. Is recalling certain model year 2013-2014 ic bus ae, and 2011-2014 be, ce, and re buses. These buses were manufactured february 11, 2010, through june 17, 2013. The passenger seat foam padding did not adequately reduce the impact forces to the knee in the lower outside corners of the seat back during compliance testing. Thus, these buses fail to conform to the requirements of federal motor vehicle safety standard (fmvss) no. 222, "school bus passenger seating and crash protection."
    navistar will notify owners, and dealers will install polystyrene blocks in the lower outside corners of each seat to increase the knee protection, free of charge. The recall began on october 10, 2013. Owners may contact navistar at 1-800-448-7825. Navistar's recall campaign number is 13512.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  • Recall 91074 [USA]: In the event of a crash, there is an increased risk of personal injury to vehicle occupants.
    Navistar is recalling certain model year 2011-2012 ic ce school buses manufactured from september 7, 2010 through september 9, 2010. The interior lower lining fails to comply with federal motor vehicle safety standard no. 221, ?School bus body joint strength.?
    navistar will notify owners, and dealers will inspect and retighten joint screws to the proper specification, free of charge. The recall began on july 23, 2012. Owners may contact navistar at 1-260-461-1890.
    navistar?S recall campaign number is 12518.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  • Recall 95159 [USA]: If the seat cushion is not securely latched to the seat structure, the seat could become dislodged, increasing the risk of injury to the vehicle occupants.
    Navistar is recalling certain model year 2011-2012 ic bus be and ce and certain model year 2012 re school buses manufactured from april 8, 2010 through july 1, 2011, equipped with c. E. White seat cushions. The self-latching mechanism used to retain the seat cushion to the frame may not activate. Thus, these seats fail to conform to the requirements of federal motor vehicle safety standard number 222, "school bus passenger seating and crash protection."
    navistar will notify owners, and dealers will repair the seats free of charge. Owners may contact navistar at 260-461-1890.
    navistar?S recall number is 12505.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  • Recall 77948 [USA]: An electrical short may cause a vehicle fire possibly resulting in property damage, personal injury, or death.
    Navistar is recalling certain model year 2007-2012 ic ce and be school buses manufactured from june 27, 2006, through march 23, 2011, equipped with a maxxforce 7 engine feature code 12nth, 12ntd, 12nte, 12ntg, 12vyy, or 12627 and alternator feature code 0008ggr, 0008ggm, 0008gwx, or 0008gel. The positive alternator cable may rub on the engine control module mounting bracket, possibly chafing its insulation and causing an electrical short.
    navistar will notify owners, and dealers will inspect and replace, if necessary, the alternator cable and the installation of the tie straps to route the alternator cable away from the engine control module mounting bracket. Repairs will be performed free of charge. The safety recall began on september 27, 2011. Owners may contact navistar at 1-800-448-7825.
    navistar's recall campaign number is 11518.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 64816 [USA]: Noncompliance to the standard increases the passenger's risk of rearward ejection from the seat which may cause personal injury or death in the event of a crash.
    Navistar is recalling certain model year 2011 and 2012 ic ce and re school buses manufactured from october 8, 2009, through april 14, 2011. These buses were built without or incorrectly installed floor channel reinforcements. Accordingly, the buses fail to conform with the seat back rear force and displacement requirements of federal motor vehicle safety standard no. 222, "school bus passenger seating and crash protection."
    navistar will notify owners and dealers will repair the buses free of charge. The safety recall is expected to begin on or before september 16, 2011. Owners may contact navistar at 1-800-448-7825.
    navistar's recall campaign number is 11513.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 76383 [USA]: This noncompliance may reduce conspicuity of the rear door, reducing the ability of emergency personnel to identify and gain access to the rear exit during an emergency, possibly increasing the occupant's risk of personal injury or death during an emergency.
    Navistar is recalling certain model year 2008 through 2012 ic be, ce, and fe school buses manufactured from november 1, 2006, through may 2, 2011. The reflective tape for the rear exit door may not have been totally completed. Accordingly, the buses fail to conform to the requirements of federal motor vehicle safety standard no. 217, "bus emergency exits and window retention and release."
    navistar will notify owners and dealers will inspect the buses and add reflective tape if necessary. The safety recall began on august 3, 2011. Owners may contact navistar at 1-800-448-7825.
    navistar's recall campaign number is 11514.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 75117 [USA]: Engine stall on the roadway increases the risk of a vehicle crash.
    Navistar is recalling certain model year 2011 and 2012 ic ce and be school buses manufactured from may 27, 2010, through march 8, 2011, equipped with maxxforce 7 engines. A cap on the return fuel valve may fall off, allowing air to be drawn into the fuel system, possibly resulting in engine hard start, no start, or stall conditions.
    navistar will notify owners and dealers will replace the return fuel valve cap free of charge. The safety recall is expected to begin on or about august 12, 2011. Owners may contact navistar at 1-800-448-7825.
    navistar's recall campaign number is 11506.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 86989 [USA]: An oil leak in the engine compartment may cause a fire.
    Navistar is recalling certain model year 2011 international commercial trucks models 4300 and 4400 and 2011 ic bus models ce and hc commercial buses manufactured from february 25, 2010, through september 20, 2010. The engine turbo oil supply line may rub on the frame rail possibly causing an oil leak in the engine compartment.
    navistar will notify owners and international dealers will repair the buses free of charge. The safety recall is expected to begin on or about january 14, 2011. Owners may contact navistar 1-800-448-7825.
    navistar's recall campaign number is 10518.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 81087 [USA]: The user of the lift could be injured should the lift move without the restraint belt properly buckled.
    Navistar is recalling certain model year 2009 through 2011 ic ce, fe, re, and be model non school buses manufactured from december 10, 2007 through january 12, 2010 and fitted with ricon public use lifts. The restraint belt on these lifts was designed to prevent the lift from moving, unless the tongue of the belt is fully engaged and latched in the buckle. Ricon has discovered, however, that it is possible for the operator to insert the belt tongue into the buckle without fully engaging the latching mechanism. In this case, the restraint belt would appear to be latched, and the operator could run the lift. If the restraint belt tongue is not fully engaged into the restraint belt buckle, and latched, the lift may operate with an occupant on the platform.
    navistar is working with ricon and ricon will be performing the remedy for this campaign. Please see ricon's defect report 09e-060. Ricon will provide customers with a warning decal and a dvd-based training aid. The safety recall began on july 1, 2010. Owners may contact ricon at 1-818-267-3000 or navistar at 1-800-448-7825.
    navistar's campaign number is 10509.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 83783 [USA]: A high pressure power steering fluid leak in the engine compartment may cause a fire possibly resulting in property damage, personnel injury, or death.
    Navistar is recalling certain model year 2011 ic ce school buses manufactured from january 19 through january 21, 2010 equipped with international maxxforce dt engines. The high pressure power steering hose may have been routed incorrectly possibly causing the hose to chafe on the power steering reservoir bracket potentially resulting in a power steering fluid leak in the engine compartment.
    navistar will notify owners and dealers will repair the buses free of charge. The safety recall began on june 11, 2010. Owners may contact navistar at 1-800-448-7825.
    navistar's campaign number is 10508.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 83737 [USA]: Without the reinforcement rod, the strength of the seat may be compromised, increasing the risk of personal injury or death in the event of a crash.
    Navistar is recalling certain model year 2011 ic ce transit buses manufactured from february 22 through march 16, 2010 equipped with passenger flip seats. The weld that retains a reinforcement rod inside the seat back frame tube may fail allowing the rod to fall out of the frame. The seats fail to conform to the requirements of federal motor vehicle safety standard no. 222, "school bus passenger seating and crash protection."
    navistar will notify owners and dealers will repair the seats free of charge. The safety recall began on july 16, 2010. Owners may contact navistar at 1-800-448-7825.
    navistar's campaign number is 10507.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 84901 [USA]: Release of the parking brake may cause sudden, unexpected shift in vehicle position possibly resulting in property damage, personal damage, or death.
    Navistar has notified nhtsa about a defect in certain model year 2010 and 2011 ic ce, be, and fe school buses manufactured from november 19, 2003 through february 9, 2010. The parking brake may release if the brake system electronic control unit software misinterprets input signals generated from cycling the ignition switch more than once at a specific frequency.
    navistar will notify owners and will repair the buses by reprogramming the vehicle's brake system ecu free of charge. The safety recall began on april 2, 2010. Owners may contact navistar at 1-260-461-1890.
    navistar's recall campaign number is 10505.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 2016569 [Canada]: Heater and defroster
    On certain school buses, the formed heater hose going to the driver’s heater could rupture allowing hot coolant to leak into the operators foot area. If hot coolant were to come in contact with the operator, it could result in a burn injury and, depending on the driver’s reaction, could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the formed heater hose.

  • Recall 2015611 [Canada]: Accessories
    On certain school buses equipped with a ricon s-series wheelchair lift, the platform could potentially crack due to bent knuckle link arms and/or defective bearing. Overtime, the platform could separate of the rear portion of the pivot plate making the lift inoperable and putting the lift operator at risk of injury. Correction: owners will need to make an appointment with the local ricon dealer to have the lift inspected and repaired.

  • Recall 2014488 [Canada]: Accessories
    On certain school buses equipped with a ricon wheelchair lift, the lift platform sides may crack, which could cause the lift to lean against the vehicle door(s) and potentially fall out of the vehicle when the doors are opened, putting the lift operator at risk of injury. Correction: dealers will inspect lift platforms for cracks and repair as necessary, and install a repair kit.

  • Recall 2013271 [Canada]: Seats and restraints
    Certain school buses fail to conform to canada motor vehicle safety standard 222 – school bus passenger seating and crash protection. The seatback material may not meet the leg protection zone impact criteria of the standard, which could increase the risk of injury during a vehicle crash. Correction: dealers will install polystyrene blocks in the lower outside corners of each seat (beneath the seat upholstery).

  • Recall 2011304 [Canada]: Electrical
    On certain school buses equipped with a maxxforce 7 engine, the positive alternator cable may rub against the engine control module mounting bracket. Continued contact could wear through the alternator cable's insulation, which could cause an electrical short circuit. An electrical short could result in a vehicle fire causing property damage and/or personal injury. Correction: dealers will inspect the alternator cable for signs of abrasion damage and install tie straps to route the cable away from the engine control module mounting bracket.

  • Recall 2011201 [Canada]: Fuel supply
    On certain school buses equipped with a maxxforce 7 engine, a cap on the return fuel valve may fall off, allowing air to be drawn into the fuel system. This could result in engine hard start, no start, or stall conditions. Engine stall on the roadway may result in the evacuation and containment of multiple passengers, which could increase the risk of personal injury. In addition, lost vehicle propulsion, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: dealers will replace the return fuel valve assembly.

  • Recall 2010004 [Canada]: Visual system
    On certain vehicles, the right side rearview mirror mounting location is such that the driver's field of view through the mirror could be obscured by the unwiped portion of the windshield. This could result in a crash causing property damage, personal injury or death. Correction: dealers will replace the mounting arm of the mirror with a longer arm.

  • Recall 2010078 [Canada]: Brakes
    On certain vehicles, the parking brake may release if the brake system's electronic control unit misinterprets signals generated from turning the ignition key more than once at a specific rate. The release of the parking brake may cause a sudden, unexpected shift in vehicle position, resulting in property damage, personal injury or death. Correction: dealers will reprogram brake system electronic control unit.

  • Recall 2010198 [Canada]: Other
    On certain buses equipped with a ricon f9 series cassette wheelchair lift, an improperly manufactured switch in the wheelchair lift restraint buckle may allow operation of the lift with the safety belt not fully latched. If the belt is not properly fastened, a wheelchair may not be adequately protected against unwanted movement, resulting a fall risk, potentially causing serious injury or death. Correction: the manufacturer will provide instructional information and warning decals.

  • Recall 2010413 [Canada]: Engine
    On certain vehicles, the engine turbo oil supply line may interfere with the frame rail, possibly causing a high pressure oil leak in the engine compartment. A high pressure oil leak in the engine compartment may cause a fire possibly resulting in property damage, personal injury, or death. Correction: dealers will replace the engine turbo oil supply line.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • IK0400037 - SERVICE BRAKES, AIR: This document is to guide users to eliminate brake pedal rattle noise.
  • IK08000403 - ENGINE AND ENGINE COOLING: This document details the procedure that must be followed to ensure proper alternator troubleshooting.
  • IK0800482 - ELECTRICAL SYSTEM: This document covers battery diagnostics, maintenance and storage requirement.
  • IK0800351 - ELECTRICAL SYSTEM: J1939 data link source address information
  • IK2600069 - ENGINE AND ENGINE COOLING: How to request a horsepower quote; all international and cummins engines
  • IK2200109 - SEATS: Bus seat back foam inspection guidelines
  • IK0400040 - BRAKES (PWS): General wheel speed sensor troubleshooting
  • IK0300010 - STEERING: Diagnosis of chassis wander complaints.
  • IK0800351 - ELECTRICAL SYSTEM: J1939 data link source address information
  • IKo800080 - ELECTRICAL SYSTEM: J1939 data link troubleshooting
  • IK0800407 - ENGINE AND ENGINE COOLING: Starter diagnostics and warranty claim procedure for all engines and all chassis excluding vehicles equipped with psi engines or cummins isb engine with allison transmissions
  • IK0800351 - ELECTRICAL SYSTEM: J1939 data link source address information
  • IK1201472 - ENGINE AND ENGINE COOLING: Pico scope ccos (crankcase separator test)
  • IK1201469 - ENGINE AND ENGINE COOLING: Picoscope test one channel rct
  • IK0800610 - ELECTRICAL SYSTEM: Picoscope test resistance and ohmmeter
  • IK0800609 - ELECTRICAL SYSTEM: Picoscope test for datalink (can) health shorts & opens
  • IK0800607 - ELECTRICAL SYSTEM: Picoscope test - battery loss of charge - parasitic draw test
  • IK2600052 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Calculating pulses per mile (speedometer setting); only models equipped with international engines
  • IK1201241 - EQUIPMENT: Ecm calibration for dpf replacement; applies to maxxforce engines
  • IK0800351 - EQUIPMENT: J1939 data link source address information
  • IK1000003 - STEERING: Power steering diagnostics flow / pressure specifications for power steering gears and power steering pumps
  • IK0800080 - ELECTRICAL SYSTEM: J1939 data link troubleshooting
  • IK0400046 - PARKING BRAKE: Wabco full power brake diagnostic code (dtc) index
  • IK0400028 - PARKING BRAKE: How to program parameters after changing wabco fpb ecu (parking brake shows n/a)
  • IK1201299 - ENGINE AND ENGINE COOLING: Engine oil capacities. All international electronic engines 1994 to present and cummins isb, ism, or isx engines
  • IK0400040 - SERVICE BRAKES, AIR: General wheel speed sensor troubleshooting
  • IK0700112 - ENGINE AND ENGINE COOLING: Aftertreatment clamp corrosion; single can aftertreatment systems
  • IK1201241 - EQUIPMENT ADAPTIVE/MOBILITY: Ecm calibration for dpf replacement; only trucks and busses built with 2007- 2009 maxxforce dt/9/10. 2010-2012 maxxforce dt/9/10, 2007-2009 maxxforce v8, 2008-2009 maxxforce 11/13 engines
  • IK1400005 - ENGINE (PWS): Driveline information center and troubleshooting procedures
  • IK0800504 - ENGINE (PWS): Repair procedures for vehicles struck by lightning
  • IK2200150 - STRUCTURE: This document will guide the user through determining if there is a sealing issue with the rear emergency door on a ce bus.
  • IK2200149 - EQUIPMENT: This article is for adding additional protection to the driver's area of the bus to help mitigate the transmission of germs.
  • IK2200088 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Factory installed air conditioning, ec4.0 system operating instructions and the service manual
  • IK2200001 - EQUIPMENT ADAPTIVE/MOBILITY: Bus air conditioning service contacts for hvac information
  • IK1600258 - UNKNOWN OR OTHER: Cleaning and disinfecting trucks and buses
  • IK0800080 - ELECTRICAL SYSTEM: J1939 data link troubleshooting
  • IK0800417 - STRUCTURE: How to reboot a body controller
  • IK0800411 - STRUCTURE: Body controller resource center
  • IK0800374 - ELECTRICAL SYSTEM: How to get a helios capture; only 1939 and 1708 multiplexed buses and trucks
  • IK1600174 - ELECTRICAL SYSTEM:SOFTWARE: Updating body controller software
  • IK0800411 - STRUCTURE: Body controller resource center
  • IK2200145 - EXTERIOR LIGHTING: Bus strobe light replacements
  • IK2200073 - STRUCTURE:BODY:DOOR : Bus body entry door switch, lh panel mounted
  • MIN13112 - ELECTRICAL SYSTEM:SOFTWARE: Eaton hybrid software improvement release
  • IK2200088 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Factory installed air conditioning, ec4.0 system operating instructions and service manual; only models built with feature code 48adc, 48add, 48ade, 48adg, 48cva, 48cvc, 48cvh, 48cvj, 48cvl, 48cvm, 48utx, 48vhg, or 48vhh.
  • IK2200031 - STRUCTURE: Bus body electrical test points
  • IK2200020 - EQUIPMENT ADAPTIVE/MOBILITY: Service and support information for the espar auxiliary fuel fired heater field service kit (p/n 2592385c91); only bus models equipped with vt365 or maxxforce 7 engines.
  • IK1300085 - EQUIPMENT ADAPTIVE/MOBILITY: Wabco fpb/quadraulic brake uneven wear
  • IK0500007 - STEERING:COLUMN: Adjustment procedure for tilt only steering column; only models with feature code 0005708
  • IK0400020 - SERVICE BRAKES, HYDRAULIC: Proper brake bleeding procedure for vehicles with wabco full power brakes; only models with wabco full power hydraulic brakes
  • IK0400018 - SERVICE BRAKES, HYDRAULIC: Uneven brake pad wear between the inner and outer pads on hydraulic brake /pin slide vehicles; only models built after 1/2004
  • IK1201299 - ENGINE AND ENGINE COOLING: Oil capacities; all electronic international engines 1994 - present. Cummins isb, ism & isx
  • IK1400023 - SUSPENSION: Suspension lean diagnostics; all models
  • IK0800351 - ELECTRICAL SYSTEM: J1939 data link source address information
  • IK0200013 - SUSPENSION: Suggested alignment target values when performing a vehicle axle alignment
  • IK2200116 - STRUCTURE:BODY:DOOR : Bus door adjustment procedure for electric and air; only models built 09/15/11 or later
  • K1200716 - ENGINE (PWS): Engine emission label replacement, certificate of conformance and clean idle sticker addition procedure
  • IK2600215 - ELECTRICAL SYSTEM: Applying advanced logic templates; only models equipped with a bcm or esc
  • IK2600008 - ELECTRICAL SYSTEM: How to diagnose electrical problems with diamond logic builder; only models equipped with a bcm or esc
  • IK2600007 - ELECTRICAL SYSTEM: How to get from history and program a bcm or esc; only models equipped with a bcm or esc
  • IK0400016 - PARKING BRAKE: Aggressive brakes with air brake foot valve leak on bus; only models with feature code 04wea - parking brake interlock - with air brakes only
  • IK2200143 - EQUIPMENT: Diagnosis and repair of intermittent operation of the child checkmate reset button.
  • IK1900022 - ENGINE (PWS): A/c refrigerant and oil capacities
  • IK1201360 - ENGINE (PWS): Cylinder performance analyzer (cpa) resource center
  • IK1201299 - ENGINE (PWS): Engine oil capacities all electronic international engines 1994 - present. Cummins isb, ism & isx
  • IK0800475 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: Radio diagnostics and information
  • IK0800411 - ELECTRICAL SYSTEM: Body controller resource center
  • IK0400056 - ELECTRICAL SYSTEM: Brake light operation; only models equipped with meritor wabco full power brakes
  • REC13511 - SEATS: The occupant of the adjacent seat located to the rear of the flip seat could suffer a pinch point injury to their toes and/or foot as a result of this condition.
  • IK2200128 - EQUIPMENT ADAPTIVE/MOBILITY: Driver heater resistor; only with feature code 48ghb and 48ghc, produced 2011 through march 2013.
  • IK1201009 - ENGINE (PWS): Medium duty cole weather operation / solid winter front; excluding high cab durastar
  • REC12523 - ENGINE AND ENGINE COOLING: The engine high pressure oil line may develop a leak or possibly rupture.
  • IK2200116 - STRUCTURE:BODY:DOOR : Bus door adjustment procedure for electric and air; only models built on 9/15/2011 and later
  • IK0900077 - FUEL SYSTEM, GASOLINE: Fuel fired engine coolant heaters may require the fuel system to be primed prior to use.
  • IK1201359 - ENGINE AND ENGINE COOLING: Breather filter and crankcase tube freezing issue in below freezing temperatures; only models with cummins isb 6.7 and qsb 6.7
  • IK1200634 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Aftertreatment resource center; all models equipped with epa 2007 and newer engines
  • TSI-134701 - SEATS: Passenger seat back pan inspection and repair
  • IK1200636 - ENGINE AND ENGINE COOLING: Epa 2010 maxxforce 7 engine calibration releases
  • AFC12941 - ENGINE AND ENGINE COOLING: Engine warning light with fault codes or engine misfire due to open injector circuits caused by spread terminals on the under valve cover (uvc) injector harness.
  • IK0900007 - ENGINE AND ENGINE COOLING: Ethylene glycol coolant color change to be phased-in approximately april 1, 2004
  • IK0800169 - FUEL SYSTEM, GASOLINE: How to change from a 5 wire fuel transfer pump to a 2 wire fuel transfer pump
  • TSI-131219 - FUEL SYSTEM, DIESEL: Fuel cooler valve (fcv) screen removal to reduce high fuel temperature; only vehicles built prior to 01 september 2011 with epa 2010 maxxforce 7 engines
  • TSI-130401 - STRUCTURE:FRAME AND MEMBERS: Frame mounted battery box - air drier service procedure
  • REC13512 - SEATS: The lower outside corners of the passenger seat back may not have sufficient padding to conform to all requirements of fmvss 222 or cmvss 222; only school bus models equipped with ic bus passenger seats.
  • IK1300085 - BRAKES (PWS): Wabco fpb/ quadraulic brake lining replacement and uneven wear
  • IK0800037 - ELECTRICAL SYSTEM: Location of 1000 ohm resistor in the hvac wiring
  • IK0400114 - BRAKES (PWS): Wabco toolbox error message when downloading wabco file; only models equipped with wabco full power brakes.
  • IK0400057 - EXTERIOR LIGHTING:BRAKE LIGHTS: 2007 and newer brake light operation; only equipped with air brakes
  • IK0400028 - BRAKES (PWS): How to program parameters after changing a wabco fpb ecu ( park brake shows na ); only models equipped with wabco full power brakes
  • IK1300055 - POWER TRAIN:MANUAL TRANSMISSION: Transmission upshifting too fast; only with allison gen 4 lct (1000 and 2000 series) transmission
  • IK0800478 - EXTERIOR LIGHTING:HEADLIGHTS: Headlight condensation or frost; excludes sealed beam headlights such as on workstar, paystar and 9900i)
  • IK2200130 - STRUCTURE:BODY:DOOR : Ic bus electric entrance door fuse
  • IK1900158 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: 2010 dash cluster lamp operation with new dpf lamp locations , functions and regeneration instructions
  • IK1600023 - VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR: Mirror repair procedures and replacement parts availability
  • IK0800374 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : To get a helios capture; all 1939 and 1708 multiplexed trucks only
  • IK0800080 - ELECTRICAL SYSTEM:SOFTWARE: J1939 data link troubleshooting; only models with 250k baud data link (black 9 pin diagnostic connector)
  • IK0800080 - EQUIPMENT:ELECTRICAL: J1939 data link troubleshooting
  • IK0400154 - SERVICE BRAKES, HYDRAULIC: Hydraulic brake system park brake inspection and adjustment procedures; only models with hydraulic brake system equipped with 04gbj park brake
  • IK0800546 - ENGINE AND ENGINE COOLING: Hvac fault 2609-19 with 4th gen bcm; only models equipped with 4th generation bcm
  • IK0700097 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: New ultrasonic def tank sending unit; only models with scr aftertreatment system.
  • IK0700096 - ELECTRICAL SYSTEM: Urea quality sensor (uqs) supplemental diagnostic and service information; only models with scr aftertreatment system and n9, n10, n13, a26 or cummins isb, isl, isx engines built from january 2016
  • IK0400155 - BRAKES (PWS): Ic bus service brake switch inspection
  • IK0800080 - ELECTRICAL SYSTEM:SOFTWARE: J1939 data link troubleshooting
  • IK0800352 - ELECTRICAL SYSTEM: Body controller/esc software updates
  • IK0800196 - ELECTRICAL SYSTEM: Asterisk in lower right quadrant of dash display
  • IK2500511 - ELECTRICAL SYSTEM:SOFTWARE: Using supplier software to check dtcs
  • IK2200139 - SEAT BELTS:FRONT: Driver?S seat belt tongue button; only with seat belt part numbers 4091405c1 thru 4091408c1
  • IK2200116 - STRUCTURE:BODY:DOOR : Bus door adjustment procedure for electric and air; only models built 9/15/11 or later
  • IK2200087 - STRUCTURE:BODY:DOOR : Bus entrance door adjustment procedures; only models built prior to 9/15/2011
  • IK0400056 - SERVICE BRAKES, HYDRAULIC: Brake light operation on hpv with full power brakes; only models equipped with meritor wabco full power hydraulic brakes
  • REC16511 - EQUIPMENT: The formed heater hose to the driver?S heater over time may fatigue, resulting in a split hose.
  • REC16510 - ENGINE (PWS): The formed heater hose to the driver?S heater over time may fatigue, resulting in a split hose.
  • IK1201248 - ENGINE AND ENGINE COOLING:COOLING SYSTEM: Cooling system flush procedure
  • IK0800351 - ELECTRICAL SYSTEM:SOFTWARE: J1939 data link source address information
  • IK0500058 - STEERING: Steering fluids
  • IK0400147 - SERVICE BRAKES, HYDRAULIC: Wabco hydraulic power brake cap/grounds diagnostics and repair procedure
  • IK4300001 - ELECTRICAL SYSTEM:SOFTWARE: Updating oncommand link with accelerator
  • IK2700100 - ELECTRICAL SYSTEM:SOFTWARE: Oncommand ez-tech
  • IK2200137 - EQUIPMENT:EMERGENCY:ESCAPE/EGRESS/EXIT: Bus passenger window troubleshooting; only buses built after 4/17/17
  • IK2200070 - STRUCTURE: Bus body tie down, floor sill repair
  • IK1201398 - ENGINE (PWS): Bus with isb frequent regeneration; only models with cummins isb engine
  • IK1201299 - ENGINE (PWS): Engine oil capacities
  • IK1201009 - ENGINE (PWS): Winter front usage
  • IK2900029 - EQUIPMENT:ELECTRICAL: Diagnostic interface cable reference guide
  • IK2700090 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Oncommand ez-tech download center
  • IK2700065 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Ez-tech download center
  • IK2500127 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Using vehicle health report faults
  • IK1900203 - EQUIPMENT:ELECTRICAL: Troubleshooting & resetting hvac doors; only vehicles with feature codes 0016wct and 0016wcs
  • IK1201299 - ENGINE (PWS): Engine oil capacities
  • IK0800482 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Battery testing, diagnostics, and maintenance information
  • IK0800374 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : How to get a helios capture
  • IK0800284 - EQUIPMENT: Ambient air temperature (aat) sensor faults/location/diagnostics
  • IK0800092 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : First check to make when troubleshooting any body controller or esc issue
  • IK0700100 - ENGINE (PWS): 2010 maxxforce 7 engine dpf cracking
  • IK0700096 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Urea quality sensor (uqs) supplemental diagnostic and service information
  • IK0600020 - WHEELS: Determine wheel speed or driveline vibration using a smart phone and free vibsensor application
  • IK2200016 - ELECTRICAL SYSTEM: Post trip inspection system will not disarm or does not operate correctly; excludes child reminder system or child check mate.
  • IK1900158 - ENGINE (PWS): Dash cluster lamp operation, functions and regeneration instructions, with international engines
  • IK2900030 - ELECTRICAL SYSTEM:SOFTWARE: Dealer ez-tech and diagnostic software support resource center
  • IK2700100 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Oncommand eztech
  • IK2700090 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Oncommand ez-tech download center
  • IK1900022 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: A/c refrigerant and oil capacities
  • IK1201363 - FUEL SYSTEM, GASOLINE: Cpa injector misfire detection; only models with 2004 thru 2017 international engines.
  • IK1201360 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Cylinder performance analyzer (cpa) resource center; only models with 2004 thru 2017 international engines.
  • IK0700079 - FUEL SYSTEM, DIESEL: Scr vehicles setting 3363-16 (fC1713) due to crossed def tank coolant lines or inverted defthv
  • IK1900228 - ENGINE (PWS): 2010 and newer vehicle air conditioning diagnostics (start here)
  • IK1900158 - EQUIPMENT ADAPTIVE/MOBILITY: 2010 dash cluster lamp operation with new dpf lamp locations , functions and regeneration instructions
  • IK1900228 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: 2010 and newer vehicle air conditioning diagnostics (start here)
  • IK1900218 - EQUIPMENT ADAPTIVE/MOBILITY: Espar airtronic low run time.
  • IK1900212 - ENGINE AND ENGINE COOLING: Front blower motor runs breifly at initial power up
  • IK0700032 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Dpf snap accel test - quick test to all vehicles with dpfs
  • IK2200088 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Factory installed air conditioning, ec4.0 system
  • IK0800503 - ELECTRICAL SYSTEM: Isb starting system diagnostics
  • IK0800092 - ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC): The first check to make when troubleshooting any body controller or esc issue
  • Rec15V-870 - EQUIPMENT ADAPTIVE/MOBILITY: Ricon public use,"s" 2000 and 5500 series lift recall
  • IK0800478 - EXTERIOR LIGHTING:HEADLIGHTS: Headlight condensation or frost; excludes sealed beam headlights such as on workstar, paystar and 9900i)
  • IK0400046 - SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE: Wabco full power hydraulic brake diagnostic code (dtc) index
  • IK0400024 - SERVICE BRAKES, HYDRAULIC: Wabco full power brakes park brake troubleshooting; only with sahr (hydraulic powered) praking brake
  • 121602 - SEAT BELTS: Change in seat belt manufacturer - inspection and replacements
  • IK1900228 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: 2010 and newer vehicle air conditioning diagnostics (start here)
  • IK1900223 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Air conditioning electrical diagnostics
  • IK1300085 - SERVICE BRAKES, AIR:DRUM:SHOES/LININGS: Wabco fpb/quadraulic brake uneven wear
  • IK0400143 - SERVICE BRAKES, AIR:DISC:PADS: Chassis with quadraulic brakes; quadraulic brake pads
  • IK1900228 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: 2010 and newer vehicle air conditioning diagnostics (start here)
  • IK1900172 - EQUIPMENT: Espar airtronic heater diagnostic guide
  • IK1900228 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: 2010 and newer vehicle air conditioning diagnostics (start here)
  • IK1200029 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY: Radiator internal restriction and flush procedure
  • IK2200132 - SEAT BELTS: Driver and passenger seat belts
  • IK1500051 - FUEL/PROPULSION SYSTEM (PWS): Only vehicles equipped with davco fuel pro 382; technical manual installation diagnostics and service
  • IK1400033 - EQUIPMENT: Torque change for 5/8 inch rear axle shaft flange mounting stud with cone locks and flat washer type hardware.
  • IK0900104A - ENGINE AND ENGINE COOLING: Charge air cooler (cac) leak test (air decay test)
  • IK0800475 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: Radio diagnostics and information
  • IK-0500013 - SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY: Ik0500013 - iros suspension auxiliary leaf spring rattle
  • IK1300085 - SERVICE BRAKES, AIR:DRUM:SHOES/LININGS: Iknowledge: navistar ce bus, be bus, and durastar models due to vehicle vocation, loading, operating environment, and driving habits, may experience brake lining wear rate that will vary. *ta
  • AFC-12949 - ENGINE (PWS): Navistar: the recalibration of engine electronic control module (ecm) is required to be updated, with latest software, to prevent possible downtime of trucks, due to diesel particulate filter (dpf) overload. Models 2011-2012 workstar, du
  • SP-G-12520 - STRUCTURE:BODY:ROOF AND PILLARS: Navistar: greater force may be needed, on certain buses, to open an emergency roof mounted exit, for emergency, where passengers may exit, without increase risk of injuries. Models ce and re. 2011-2012. *pe
  • AFC-12913 - ENGINE (PWS): Navistar: click document search button for owner letter. On certain models, information is provided regarding update of electronic control module (ecm) recalibration. *pe
  • IK-2600176 - ELECTRICAL SYSTEM:SOFTWARE: International: configurations regarding identifying the esc/bc programming affecting pupil warning light. *pe
  • AFC-11926 - STRUCTURE:BODY:HOOD: Navistar: see document search button for owner letter. Certain model year truck has a condition where the air intake pipe contacts hood and causes wear on pipe resulting in small hole worn in pipe where engine wear and dirt ingestion ca
  • AFC-11919 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN: Navistar: on certain models ce, fbc, fe, re, sfc bus 4300, 4400, 7300, and 7400 a service procedure is provided, the gauge cluster and the fan, which may not turn off or function correctly. *pe
  • AFC-G-11925 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Ic bus: see document search button for owner letter. On certain trucks, recalibration of engine ecm is require for prevention of a drop in engine power during regeneration exhaust cycle. *pe
  • AFC-11925 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Navistar: see document search button for owner letter. Recalibration of engine ecm for certain trucks are require for prevention of a drop in engine power during exhaust regeneration cycle. Models 1300, durastar, workstar, ce bus, hc
  • AFC-11924 - ELECTRICAL SYSTEM: Navistar: certain trucks may allow water intrusion into module where seal, between two halves of eaton ecu, is located causing the 30 amp transmission fuse failure. *pe
  • SB-IK-2200069-5 - STRUCTURE:BODY:DOOR : Navistar: forward door bracket pulled loose from the door. Improper adjustment, loose attachment bolts, or an obstruction limiting door travel are the most common cause. *rm
  • MIN-11132 - ENGINE AND ENGINE COOLING:ENGINE: Navistar: poor launch concerns and stored trouble codes. A software problem. *rm
  • MIN-11131 - ENGINE AND ENGINE COOLING:ENGINE: Navistar: there is updated ecm software. *rm
  • AFC-G-11907 - ENGINE AND ENGINE COOLING:ENGINE: Ic corp service campaign: see document search button for owner letter. The automatic engine shutdown feature is not working correctly due to software. *rm
  • AFC-G-11903 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Ic corp service campaign: see document search button for owner letter. Installation of new engine software for the ecm. *rm
  • IK-2200087 - STRUCTURE:BODY:DOOR : International: bus entrance door adjustment procedures. The following procedures outline the entrance door bracket, control bar, actuator rod, electric door controller, and air door cylinder and valve adjustments. No model years listed.
Known Recall Investigations
  • Lap seat belts fail to latch investigation as of 20181217

    The office of defects investigation (odi) of the national highway traffic administration (nhtsa), received a complaint from a school bus fleet alleging seat belt failures in their model year 2011 navistar ic (navistar) school buses, equipped with amsafe non-retractable passenger two-point seat belts. Following receipt of this complaint, odi reached out to multiple school bus fleets across the country operating similar buses and confirmed the problem also existed in other buses.Following confirmation of similar seat belt failures in other school districts, nhtsa opened investigation (pe18-015) on december 17, 2018 to assess the manufacturers data including warranty claims, field reports, design changes, etc.The scope of this investigation included all model year 2011 through 2016 navistar school buses. Analysis of the manufacturer data provided to nhtsa in response to this investigation showed high seat belt failure rates in model year 2011 navistar be, ce and re school buses when compared to peer vehicles. The elevated failure rates dropped on vehicles produced after two design changes made by the manufacturer during the production of 2011-2016 seat belts. Navistar implemented a dimensional change to the metal tongue on april 25, 2012 and started utilizing a more robust (car-type) seat belt starting april 3, 2015. The combination of these two changes significantly decreased the seat belt warranty rates in model year 2012-2016 buses. Navistar?S testing and engineering analysis showed that long term cycle fatigue (buckling and unbuckling the seat belt) can cause the plastic fingers attached to the metal tongue to crack and fall off. The missing fingers can result in an elevated force necessary to latch the tongue in the buckle.The elevated force required can prevent the buckle from latching, increasing the risk of an injury in the event of a crash. By a letter dated june 21, 2019 navistar notified nhtsa of a safety defect in their model year 2011 navistar ic be, ce and re school buses built with amsafe non-retractable passenger two-point seat belts and initiated safety recall 19v-478. With recall action 19v-478 taken by navistar this investigation is closed. Further use of agency resources does not appear to be warranted. The closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist on other model or my vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.

  • Failed school bus seat back pans investigation as of 20170912

    There is no summary currently available

OBD-II Error Codes

Common OBD Error codes specific to this vehicle.

  • C1713 [1] Left Front Sensor Circuit Fault
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.