Nissan Titan 2006

• Recall 79146 [USA]: This could cause engine stalling increasing the risk of a crash.
  Nissan is recalling certain model year 2004-2006 armada, titan, infiniti qx56 and model year 2005-2006 frontier, pathfinder and xterra vehicles. The intelligent power distribution module (ipdm) assembly contains an engine control module (ecm) relay that has a diode for electrical current noise reduction. The ecm relay may allow silicon vapor to form and, over time, the silicon evaporates from the diode molding which causes silicon oxide to develop on the ecm relay contact due to arcing.
  dealers will replace the ecm relay inside the ipdm assembly. This service will be performed free of charge. The safety recall began on december 6, 2010. Owners may contact nissan at 1-800-647-7261.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 86170 [USA]: If the collar weld separates, the vehicle handling will deteriorate, possibly resulting in a vehicle crash.
  Nissan is recalling certain front and rear lower links, p/nos. 54501zq00a, 54500zq00a, 551a1zq00a, 551a0zq00a , 54501ea00a, 54500ea00a, 551a1ea500, 551a0ea500, 54501zr00a, and 54500zr00a, sold between november 25, 2009 and may 14, 2010 as replacement parts for model year 2004 through 2010 titan, armada, and qx56, and model years 2005 through 2010 frontier, xterra, and pathfinder vehicles. The lower control link assembly has two cylindrical collars forming the inboard attachment points to the chassis. Due to an improper welding process some collars may contain welds that do not meet strength specifications.
  nissan will notify owners and dealers will replace any affected lower link free of charge. The safety recall began on july 12, 2010. Owners may contact nissan at 1-800-647-7261.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 68236 [USA]: This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
  Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. The instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
  dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. This service will be performed free of charge. The safety recall began on march 22, 2010. Owners may contact nissan at 1-800-647-7261.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 78410 [USA]: This could cause corrosion in the motor leading possibly to overheating and a fire.
  Nissan is recalling 180,664 my 2005-2006 titan, armada and infinity qx56 vehicles manufactured after march 17, 2005, that are equipped with a visteon air conditioning condenser fan motor. The fan motor may not be properly sealed allowing excessive water intrusion and inadequate drainage of moisture.
  dealers will install a 'thermal protector kit' and test the air conditioning condenser fan motor and replace it if necessary. The recall began on august 2, 2008. Owners may contact nissan at 1-800-647-7261.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 32375 [USA]: This harness would result in power from the trailer brake controller going to the towing vehicle dash light circuit rather than the trailer brakes. this result would be the lack of trailer braking when the towing vehicle brakes were applied. it would also result in the towing vehicles dash lights being activated when the vehicle brakes were applied. the failure of the application of the trailer brake could result in reduced ability to stop and contribute to a possible crash.
  Certain hopkins aftermarket trailer brake control connection harnesses sold for use on certain models of nissan vehicles which are listed above. The internal part numbers within hopkins are: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, and 1290376035. A wire may have been placed in an incorrect position in the electrical connector housing. This results in an incorrect routing of wires between the trailer brake controller and the towing vehicle wiring system.
  hopkins will notify owners and replace the original harness with a revised harness free of charge. The recall began august 17, 2007. Owners can contact hopkins at 800-835-0129.
  this recall only pertains to aftermarket harnesses and has no relation to any original equipment installed on vehicles manufactured by nissan.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 46498 [USA]: If the wires for the seat belts and speaker wires break and make contact, there is a possibility that the pretensioner may deploy. if this happens when the seat belt is retracted, it will not be possible to use the seat belt. if one of the wires on the right side harness for the seat belt tension sensor breaks, the passenger side front air bag will not deploy as designed in a frontal collision increasing the risk of a crash and personal injury.
  On certain king cab trucks, the wires in the harness were routed through the rear doors and into the body. These wires may break due to over bending of the harness as the door is opened and closed. The harness contains wires for the driver seat belt pretensioner and for the front passenger seat belt which is part of the occupant classification system. Wires for the rear audio speakers are also contained n the harness.
  dealers will replace the wire harness cover with a different type that prevents over bending of the harness and the harness will be rerouted free of charge. The recall began on february 19, 2007. Owners may contact nissan at 1-800-647-7261.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 51370 [USA]: This may result in the right side doors coming partially open increasing the risk of injury to occupants.
  Certain light trucks fail to comply with the requirements of federal motor vehicle safety standard no. 206, "door locks and door retention components." an arc weld is missing on some right side rear door upper latch assemblies.
  dealers will replace the upper latch assembly free of charge. The recall began on april 3, 2006. Owners may contact nissan at 800-662-6200.
  nissan recall no. Pb017.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 2012436 [Canada]: Airbag
  On certain king cab vehicles, wires routed through the rear doors and into the body may break due to over bending as the door is opened and closed. The affected wires control seatbelt pretensioners, the front passenger seatbelt tension sensor (part of the occupant classification system), and the rear audio speakers. If the wires for the seatbelt pretensioner and speaker break and make contact, a pretensioner may deploy. If this happens when the seatbelt is retracted, it will not be possible to use the seatbelt. If wires for the seatbelt tension sensor break, the passenger side front airbag will not deploy as designed in a frontal crash. Correction: owners of vehicles with malfunctioning front outer seatbelt(s), malfunctioning rear audio speakers, or where the supplemental restraint system (srs) indicator light is on are advised to bring their vehicle to a dealer for inspection. If there is a malfunction of the rear door wiring harness, the harness will be replaced. Note: this campaign follows recall 2006323 (nissan r117) where dealers previously inspected and repaired or replaced the wiring.

  Show Content

• Recall 2010060 [Canada]: Fuel supply
  On certain vehicles, the material used on fuel level sending unit contacts can wear and contaminate the sender. This causes the instrument panel fuel gauge to display that the vehicle still has some fuel left in the tank when the fuel tank is empty. An inaccurate fuel gauge can lead to engine stalling while driving, which may increase the risk of a crash causing property damage, personal injury or death. Correction: letters will be sent to owners in two stages. The first letter will advise owners of fuel gauge inaccuracy and recommend maintaining a fuel level above the one half position. The second letter will follow, requesting owners bring their vehicles to a dealer for replacement of the fuel sender unit.

  Show Content

• Recall 2010373 [Canada]: Engine
  On certain vehicles the intelligent power distribution module (ipdm) assembly contains an engine control module (ecm) relay that has a diode for electrical current noise reduction. The ecm relay may allow silicon vapor to form and over time the silicon evaporates from the diode molding which causes silicon oxide to develop on the ecm relay contact due to arcing. In certain instances, this oxidation could cause engine performance issues (hesitation, rough engine idle, slow start/no-start condition), and engine stalling at low engine speeds which may result in a crash. Correction: dealers will replace the engine control module (ecm) relay.

  Show Content

• Recall 2008221 [Canada]: Electrical
  Certain 2005-2006 model year vehicles may have been assembled with an incorrectly manufactured air conditioning condenser fan motor, which could allow excessive water intrusion and inadequate drainage. If sufficient moisture accumulates in the motor, corrosion could occur, increasing internal friction, and thereby augmenting the electrical current draw. This could cause an increase in the motors operating temperature that could eventually melt its wiring insulation and other plastic components and form a gas. If two wires without insulation touch each other and create a spark, this gas could ignite and result in a vehicle fire, which could cause property damage, personal injury or death. Note: 2004, and some 2005 model year vehicles are equipped with a different fan motor that is not subject to this campaign. However, it is possible that a limited number of these vehicles may have received the subject condenser fan as a service replacement part, thereby being included in this action. Correction: dealers will affect repairs.

  Show Content

• Recall 2006049 [Canada]: Structure
  Certain king cab vehicles fail to comply with the requirements of cmvss 206 - door locks and door retention components. The right side rear door upper latch assembly may not sustain loads specified by the standard. Correction: dealers will replace the latch assembly.

  Show Content

• Recall 2006323 [Canada]: Seats and restraints
  Certain king cab vehicles. Wires in the harness routed through the rear doors and into the body may break due to over bending of the harness as the door is opened and closed. On the left side, the harness contains wires for the driver seatbelt pretensioner, and on the right side the harness contains wires for the front passenger seatbelt pretensioner and for the seatbelt tension sensor, which is part of the occupant classification system. Wires for the rear audio speakers are also contained in the harness on each side. If the wires for the seatbelt pretensioner and speaker break and make contact, there is a possibility that the pretensioner may deploy. If this happens when the seatbelt is retracted, it will not be possible to use the seatbelt. If one of the wires in the right side harness for the seatbelt tension sensor breaks, the passenger side front airbag will not deploy as designed in a frontal crash. Correction: dealers will inspect and, if necessary, replace the wiring harness with an updated version.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Engine compartment fire investigation # PE08037

  On may 30, 2008, the office of defects investigation (odi) opened a preliminary evaluation based on consumer complaints alleging that smoke and/or fire erupted in the engine compartment of model year (my) 2005-2006 nissan armada and titan vehicles.By letter dated june 24, 2008, nissan notified the national highway traffic safety administration (nhtsa) that it will conduct a safety recall (nhtsa #08v284) for my2005-2006 nissan titan, armada and infiniti qx56 vehicles manufactured from march 17, 2005 to august 21, 2006 that are equipped with a 90-watt air conditioning condenser fan.The recall involves approximately 180,664 vehicles.This also includes approximately 5,689 subject condenser fans, some of which may have been installed in my2004 and pre-march 17, 2005 my nissan titan, armada or infiniti qx56 vehicles as a service replacement part.Nissan dealers will install a special thermal protector kit on existing fans that will eliminate the potential for a fire to occur.Nissan north america, inc. (nissan) informed odi that the 90-watt air conditioning condenser fan was manufactured out-of-specification allowing for excessive water intrusion and inadequate drainage of moisture that may accumulate in the motor as a result of water intrusion or condensation.If sufficient moisture accumulates in the motor without adequate drainage, corrosion may occur.The corrosion can cause an increase in internal friction and an increase in the electrical current draw, resulting in an increase in the temperature of the motor that could melt its wiring insulation and other plastic components and form a gas.If two wires without insulation touch each other and create a spark, this gas could ignite and result in a fire.The action taken by nissan is sufficient to resolve the issue raised by this investigation.Accordingly, this investigation is closed.
  

  Show Content

The part that failed was the delta stroke sensor i was coming home from the store and suddenly i noticed the brake light came on and when i pressed the brakes it made a grinding noise like it was trying to lock the brakes so it was almost impossible to stop

I have had to replace my transfer case 2 times, my front drive side hub assembly 2 times in less than 2 years. I have replace front axle and and rear. Now my passenger side leaks out from under the glove box every time it rains into my floor keeping it wet. Just yesterday my transmission went itno limp mode and i know it can be a number of things . I look at the 04 thru 07 titans and they have a lot of issues like have but haven't listed them all, but the issues iam having are not on recall list for my 2006, but are for the other years??? This is my only vehicle and i can't afford to keep dropping $ into it. Back driver window motor stopped and window fell and broke, manifold ticking is a recall for the 2005, but not my 2006. I could keep going but i am getting so frustrated. I was going down the road at about 45 mhp when it just went into limp mode, so i pulled over turned it off and back on then it would work for about 3 min. Stop do it again to get home. It will go into gear, and the rpm's rev and go up ,but i am not getting very far at all. My trans fluid is good. I have also replaced the throttle position sensor. All fuses are good and codes reset and it still goes limp mode.

I have had to replace my transfer case 2 times, my front drive side hub assembly 2 times in less than 2 years. I have replace front axle and and rear. Now my passenger side leaks out from under the glove box every time it rains into my floor keeping it wet. Just yesterday my transmission went itno limp mode and i know it can be a number of things . I look at the 04 thru 07 titans and they have a lot of issues like have but haven't listed them all, but the issues iam having are not on recall list for my 2006, but are for the other years??? This is my only vehicle and i can't afford to keep dropping $ into it. Back driver window motor stopped and window fell and broke, manifold ticking is a recall for the 2005, but not my 2006. I could keep going but i am getting so frustrated. I was going down the road at about 45 mhp when it just went into limp mode, so i pulled over turned it off and back on then it would work for about 3 min. Stop do it again to get home. It will go into gear, and the rpm's rev and go up ,but i am not getting very far at all. My trans fluid is good. I have also replaced the throttle position sensor. All fuses are good and codes reset and it still goes limp mode.

Tl* the contact owns a 2006 nissan titan. The contact stated while idling, the front of vehicle caught fire. The contact stated no warning light was illuminated. The contact was able to extinguish the vehicle with a fire hydrant his neighbor provided at the moment. A fire department did file a report. The vehicle was not diagnosed or repaired. A dealer was not contacted. The vin was associated to nhtsa campaign number: 10v517000 (engine and engine cooling). The manufacturer had not been informed of failure. The failure mileage was approximately 120,000.

Tl* the contact owns a 2006 nissan titan. The contact stated while idling, the front of vehicle caught fire. The contact stated no warning light was illuminated. The contact was able to extinguish the vehicle with a fire hydrant his neighbor provided at the moment. A fire department did file a report. The vehicle was not diagnosed or repaired. A dealer was not contacted. The vin was associated to nhtsa campaign number: 10v517000 (engine and engine cooling). The manufacturer had not been informed of failure. The failure mileage was approximately 120,000.

Airbag light is constantly flashing and nothing on the steering wheel works. Cruise control, volume for the radio, mode select and etc. This seems to be a common issue after looking at other forums with nissan titan owners complaints.

Airbag light is constantly flashing and nothing on the steering wheel works. Cruise control, volume for the radio, mode select and etc. This seems to be a common issue after looking at other forums with nissan titan owners complaints.

Brake light will come on and brakes will grind and crunch when trying to stop. After shutting of and restarting vehichle the problem will go away temporarily.

Brake light will come on and brakes will grind and crunch when trying to stop. After shutting of and restarting vehichle the problem will go away temporarily.

Common OBD-II Error Codes

• P0448 [2] Evaporative Emission Control System Vent Control Circuit Shorted
• U1000 [3] CAN bus network code
• U1001 [1] SCP (J1850) Invalid or Missing Data for Primary Id
• U1002 [1] SCP (J1850) Invalid or Missing Data for Primary Id
• U1010 [3] SCP (J1850) Invalid or Missing Data for Engine Air Intake
• P0456 [2] Evaporative Emissions System Small Leak Detected
• C1179 [1] Speed Control Actuator Assembly Cable Slack Failure
• P0335 [1] Crankshaft Position Sensor A Circuit Malfunction