Toyota Sequoia 4wd 2018

• Recall 190560 [USA]: An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
  Toyota motor engineering & manufacturing (toyota) is recalling certain jtekt power steering gear assembly service parts for 2007-2021 tundra and 2008-2022 sequoia, part numbers 44250-0c160, 44250-0c131, 44250-0c170, and 11250-0c121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
  dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on february 17, 2022. Owners may contact toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21th01.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

• Recall 145019 [USA]: If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.
  Toyota motor engineering & manufacturing (toyota) recalled certain 2018-2019 4runner, highlander, camry, land cruiser, sequoia, sienna, tacoma and tundra, and lexus rc 300, rc 350, gs 350, gx 460, is 300, lc 500, ls 500, lx 570, rx 350l, and 2019 toyota avalon and corolla, and certain lexus nx 300, and es 350 vehicles on january 13, 2020. On march 4, 2020, toyota expanded the recall to include certain 2014-2015 toyota 4runner and land cruiser, 2018 avalon, corolla, 2014 fj cruiser, 2017 sienna and lexus 2018 es 350, 2018-2019 gs 300, 2013-2014 gs350, 2014-2015 gx 460, is 350 and lx 570, 2014 is f, 2018-2019 is 350, lc 500h and ls 500h, 2013-2015 ls 460, 2015 nx 200t and rc350, 2017 rc 200t and rx 350. Toyota also removed the 2018-2019 toyota 4runner and land cruiser and 2018-2019 lexus gx 460 and lx 570 and 2019 nx300 from inclusion in this recall. On march 19, 2020, toyota expanded the recall to include 2015 lexus gs350 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
  toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began may 4, 2020. Owners may contact toyota customer service at 1-888-270-9371 or lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are 20tb02 and 20ta02 for toyota vehicles and 20lb01 and 20la01 for lexus vehicles.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

• Recall 134919 [USA]: If the air bags do not deploy as intended, it can increase the risk of injury in a crash.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2018-2019 toyota tundra and sequoia vehicles and 2019 toyota avalon and avalon hybrid vehicles. The air bag electronic control unit (ecu) may erroneously detect a fault during the vehicle start-up self check. If this occurs, the ecu may not deploy the airbags as intended, in the event of a crash. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 208, "occupant crash protection," and 214, "side impact protection."
  toyota will notify owners, and dealers will update the software for the air bag ecu, free of charge. The recall began october 26, 2018. Owners may contact toyota customer service at 1-888-270-9371. Toyota's number for this recall is j0x. Note: 18v-122 was superseded by this recall. The software remedy also includes the updates to the software for 18v-122.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

• Recall 134178 [USA]: Deactivation of the vehicle stability control system can increase the risk of a crash in certain conditions.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2018 toyota tundra and sequoia vehicles. Electrical interference within the power supply circuit may cause the vehicle's electronic stability control system to be deactivated. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 126, "electronic stability control systems."
  toyota will notify owners, and dealers will update the vehicle's software, free of charge. The recall began march 14, 2018. Owners may contact toyota customer service at 1-888-270-9371. Toyota's number for this recall is j0h. Note: this recall has been superseded by 18v-685. The software remedy for 18v-685 includes the updates to the software for this recall.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

• Recall 2021723 [Canada]: Accessories
  Issue: this recall is for certain block heater kits installed on certain vehicles or sold as accessories at toyota or lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: this recall only affects the following block heater/cord part numbers: C014003034 pk5a408j09 pU14000904 C014003151 pk5a408j13 pU14000905 C014000885 pk5a489j11 pU14000907 C014000888 pk5a489j22 pU14000909 C014000907 pk5a410h00 pU14000911 C014100904 pU14000900 pU14000913 C014100907 pU14000901 pU14003571 C014100911 pU14000902 pk5a408j05 pU14000903 safety risk: engine block heater wiring that overheats or melts could create the risk of a fire. Corrective actions: toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

• Recall 2020514 [Canada]: Fuel supply
  Issue: on certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: this recall is an expansion of recalls src r95/src r96 and src ra2/src ra3 (transport canada recall numbers 2020-005 and 2020-088). Safety risk: a sudden loss of engine power could increase the risk of a crash. Corrective actions: the company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Recall 2020088 [Canada]: Fuel supply
  Issue: on certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: this recall is an expansion of recall src r95/src r96 (transport canada recall no. 2020-005) safety risk: a sudden loss of engine power could increase the risk of a crash. Corrective actions: the company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Recall 2020005 [Canada]: Fuel supply
  Issue: on certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Safety risk: a sudden loss of engine power could increase the risk of a crash. Corrective actions: the company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.

• Recall 2018547 [Canada]: Airbag
  Certain vehicles may not comply with the requirements of canada motor vehicle safety standard (cmvss) 208 - occupant protection in frontal impacts and cmvss 214 - side impact protection. The airbag (srs) control unit may incorrectly detect a fault in one or more of the front or side airbag impact sensors during vehicle start up. In the event of a crash where airbag deployment is required, this may result in the airbags not deploying as designed, increasing the risk of injury. Upon detection of a fault in the airbag system, multiple warning lights would activate, a warning buzzer would sound, and a warning message would display on the instrument panel display. Correction: dealers will update the airbag control unit software. Note: this recall supersedes recall 2018-100. Vehicles repaired as part of the previous recall will require re-inspection and repair.

• Recall 2018100 [Canada]: Electrical
  Certain vehicles may fail to comply with the requirements of canada motor vehicle safety standard (cmvss) 126 - electronic stability control systems. Electrical noise could be introduced into the yaw rate sensor within the airbag ecu, which could result in deactivation of the vehicle stability control and pre-collision systems and limited function of the trailer brake controller system. This would be contrary to the requirements of the standard, and could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will update the software of the ecu. Note: this recall is superseded by recall 2018547. Please see recall 2018547 for more information.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Common OBD Error codes specific to this vehicle.

• C0140 [1] C0140
• C0141 [1] C0141
• U1400 [1] U1400
• P0087 [1] Fuel Rail/System Pressure - Too Low
• P0171 [1] System too Lean (Bank 1)
• P0174 [1] System too Lean (Bank 2)

In the past few months the automatic braking feature was activated without any reason. No obstruction in front, no unusual weather or driving conditions. Fortunately nobody was close behind and no accident occurred. Today the blind spot and cross traffic indicators stopped working. I have not taken it into the dealer yet. I will do so soon.

The contact owns a 2018 toyota sequoia. The contact stated while driving at 55 mph, the lane departure and rear cross passing warning light illuminated and the vehicle failed to turn off. The contact took the vehicle to the local dealer to inspect the vehicle however, the mechanic was unable to duplicate the failure. Several months later, the failure recurred. The contact took the vehicle back to the same local dealer to be inspected. The contact was informed that the rear bumper sensor was not properly aligned to the brackets on the bumper, causing the failure. The vehicle was repaired however, the contact was concerned that at some point the failure might recur. The manufacturer was made aware of the failure. The failure mileage was 45,000.

I took my 2018 toyota sequoia (vin: [xxx]) on september 23, 2020 for the six-month toyotacare service to american toyota located at 5995 alameda blvd ne, albuquerque, nm 87113 with the assumption that the six-month toyotacare service will include fixing any pending safety recall. However, after the service, when i checked the paperwork, i found out that the pending safety recall (manufacturer recall: 20ta02, nhtsa recall: 20v012) was not fixed and it was claimed that there were no safety recalls associated with the vehicle (see the attached paperwork). I called the service department at the american toyota and the service representative didn't give me a reasonable reason so i demanded to talk a manager. The manager didn't know why the safety recall was not fixed so he promised to do some investigations and get back to me. Later, a senior manager from the american toyota called me and gave me the following reasons for not fixing the safety recall: - i specifically didn't ask for safety recall to be fixed - american toyota didn't have a certified technician available at that time to fix the safety recall - american toyota made false statement on the service paperwork that there was no safety recall associated with the vehicle when i talked to the senior service manager at american toyota, he promised to get the database and paperwork updated soon but as of today (three weeks later) i have not received a corrected paperwork from the american toyota. I see this a systematic issue at american toyota to falsely mark the service paperwork as no pending safety issue if the customer didn't ask for fixing a safety issue and/or if a certified technician is not available. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

I took my 2018 toyota sequoia (vin: [xxx]) on september 23, 2020 for the six-month toyotacare service to american toyota located at 5995 alameda blvd ne, albuquerque, nm 87113 with the assumption that the six-month toyotacare service will include fixing any pending safety recall. However, after the service, when i checked the paperwork, i found out that the pending safety recall (manufacturer recall: 20ta02, nhtsa recall: 20v012) was not fixed and it was claimed that there were no safety recalls associated with the vehicle (see the attached paperwork). I called the service department at the american toyota and the service representative didn't give me a reasonable reason so i demanded to talk a manager. The manager didn't know why the safety recall was not fixed so he promised to do some investigations and get back to me. Later, a senior manager from the american toyota called me and gave me the following reasons for not fixing the safety recall: - i specifically didn't ask for safety recall to be fixed - american toyota didn't have a certified technician available at that time to fix the safety recall - american toyota made false statement on the service paperwork that there was no safety recall associated with the vehicle when i talked to the senior service manager at american toyota, he promised to get the database and paperwork updated soon but as of today (three weeks later) i have not received a corrected paperwork from the american toyota. I see this a systematic issue at american toyota to falsely mark the service paperwork as no pending safety issue if the customer didn't ask for fixing a safety issue and/or if a certified technician is not available. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

Audio multimedia (including handsfree driving devise and gps) without any reason and while they are in use rebooting and rebooting, and can cause distract the driver

Sunroof exploded while driving on freeway. I was doing 65 mph in the carpool lane. No apparent debris from surrounding vehicles. Front car was far away, side vehicles driving slower and no trucks. All the edges of the remaining glass are facing outward as if there was too much pressure inside the vehicle. I had complained earlier to the dealer about a wind whistling noise which they were unable to confirm. 10:15 am, 58 degrees, spotted rain, 5-16-2019

Pre collision system(pcs) is not working. The two problems are 1. The pcs off light comes on dash when the pcs is on as evidenced by the photos. 2. The pcs system does not apply the brakes in a near collision. Car was taken into toyota of greenville and we were told that this was a problem with other toyotas but they did not have a solution. Now we are stuck with a car with a faulty safety feature.

Rented vehicle from hertz in oklahoma city, ok on 10/14/18. When i returned vehicle on 10/18/18, the rental car associate wrote "safety" on the window. When i asked what the "safety" was for, he said, "... This vehicle is under recall and should have never been rented to you." nhtsa #18v685 - air bag may disabled due to faulty programming. Additionally, recall number 18v122000 recall date 02/20/2018 component electronic stability control may be relevant.

The seats from 2 and 3 row vibrates and makes noise,seat belts gets stuck and doesn't retrack back completely inside and get twisted every single time.Every single time i have to put the belt inside manually

Received toyota recall notice for my vehicle; specifically by vin. Called a local toyota dealer who could not find this recall. Called toyota who said it was fixed on my vehicle at a time when they did not have possession!! So is it ok to drive??

Blind spot monitor malfunction. Rear traffic alert malfunction. Pre collision warning system malfunction. This has been happening since odometer reading of 312 miles. Told by toyota that a recall was issued and a software update would remedy this. Went today 3/21/18 to have update installed. Within 25 miles of leaving the dealership the warnings and malfunctions we're back on. The software update did not work. Car continues to have stability control malfunctions and sensor malfunctions related to collision warnings, blind spot, and rear traffic alert.

I am having a recurrent problem with my 2018 sequoia in that i am consistently getting warning lights and alarms going off for 'brake warning,' rear cross traffic alert, 'blind spot monitor malfunction' and 'front camera malfunction.' it has been in the shop 5 times and they keep saying there are computer gliches and keepnupdating the software over and over again. Toyota sent down a tech from denver to take a look at it and instead of repairing the problem, they have disarmed all of my alarms because what they said was that they were set too sensitive?! This is a huge safety issue as two of the times that the 'brake warning' flashes the truck starts to slow itself down. What if this happens when an 18-wheelerbis behind me? The brake lights don't come on to let them know that my vehicle is slowing down!! I am very scared of driving this vehicle and toyota says it's safe to drive? I'm at a loss as what to do now given that all of these software updates are being done and alarms are disabled i feel like i'm driving in a vehicle that is unsafe!!

Every time the vehicle is started and upon initially moving forward the first 50 feet, a loud clunk is heard and it can also be felt in the foot pedals and the steering wheel. This issue happens every time the car is started and the vehicle moves forward the first 50 feet or so. It does not occur any other time during the drive. I feels as if it's a front suspension issue.

I purchased this vehicle new from mark miller toyota on fri dec 29th, left the dealership at 12:10pm with 39 miles on it. Ran a few errands and showed my friends, we went to leave after eating some food and at 45 miles in my odo i got 2 error messages. "blind spot monitor malfunction, visit your dealer" and "rear cross traffic alert malfunction, visit your dealer". I had only put 6 miles on this and i contacted the dealership right away at 6:47 pm and was told that the service dept wouldn't hang around for me to get there in 10 mins or less and that i could bring it in another day or to any dealership. Light has come on 2 more times since, the 3rd time total, i drove it to a different dealership(that's closer to me) but they had no one available to look at it. The service lady did see it but all she did was make an appt for me for wed jan 3rd to have it look at. I've talked to another gentleman through a forum and he had this same problem and sent me the name of his investigator at your offices. His name is [xxx]. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

The vehicle has a malfunction on the rear cross traffic, blind spot monitor and possible adaptive cruise control - at only 30 miles.

Tl* the contact owns a 2018 toyota sequoia. On several occasions, when the vehicle was started, the adaptive collision warning sensor illuminated. The contact stated that the vehicle was turned off and back on, and the vehicle would reset itself. The failure recurred several times. On several occasions, while driving various speeds with no other vehicles ahead, the auto braking feature independently activated and the "brake, obstacle ahead" warning message illuminated. The vehicle would then suddenly brake independently. The vehicle was taken to the dealer (hoover toyota, 2686 john hawkins pkwy, hoover, al 35244, (205) 978-2600) where the forward facing cameras and sensors were replaced; however, the failure recurred. The contact stated that several warning indicators illuminated at times, including the blind spot monitoring system malfunction, adaptive collision sensor, brake obstacle ahead warning indicator, and adaptive cruise control. The vehicle was taken back to the dealer to be diagnosed. The contact was informed that the bumper sensors and sideview mirrors where the forward collision sensors were housed needed to be replaced. The vehicle was repaired; however, the failure recurred. The vehicle was taken back to the dealer and was replaced with a similar vehicle. The contact stated that the replacement vehicle experienced similar failures. The contact stated that the vehicle was taken back to hoover toyota where the contact was informed that the issue was due to a software failure, and that the engineers at toyota were actively working on the software update. The vehicle was not repaired. The manufacturer was notified of the failures. The approximate failure mileage was 12.*bf *tr

Issue: safety features failing at less than 500 miles problem statement: at less than 500 miles the safety sensors ( collision prevention, cruise control adaptable speed, rear cross traffic, blind spot monitor ) are failing repeatedly. Dealer has contacted toyota for support. No eta at present.