NTB12055E

Classification:
Reference:
FA12-001e
Date:
NTB12-055e
July 10, 2015
CLICKING NOISE FROM FRONT OR REAR AXLE
DURING TAKE-OFF/ACCELERATION
This bulletin has been amended to add models and update to the current model year
Please discard previous versions.
2010–2016 370Z Coupe & Roadster (Z34)
APPLIED
2010–2013 Rogue (S35)
VEHICLES: 2010–2013 Altima Coupe (CL32)
2010–2011 Altima Hybrid (L32H)
2014–2015 Rogue Select (S35)
2010–2015 Altima Sedan (L32/L33) 2014–2015 Rogue (T32)
2011–2014 Cube (Z12)
2010–2015 Sentra (B16/B17)
2011–2015 Juke (F15)
2007–2015 Versa Sedan (C11/N17)
2011–2015 LEAF (ZE0)
2007–2012 Versa Hatchback (C11)
2010–2014 Maxima (A35)
2014–2015 Versa Note (E12)
2010–2014 Murano (Z51)
2013–2015 NV200 (M20)
2010–2015 Pathfinder (R51/R52)
2014–2015 NV200 Taxi (M20)
2011–2015 Quest (E52)
IF YOU CONFIRM
“Clicking” noise coming from either left or right front/rear CV-type axles during takeoff/acceleration.
ACTION
Apply Molykote® M77 grease (P/N 44003-7S000) to the hub bearing surfaces.
NOTE:

Do not remove the axle from the hub or transmission for this bulletin.

Refer to the Electronic Service Manual (ESM) for model-specific torque
specifications.
 For 2007-2015 Versa and 2013 LEAF vehicles, see the Service Procedure
torque specifications on page 3.
IMPORTANT: The purpose of “ACTION” (above) is to give you a quick idea of the work you will be
performing. You MUST closely follow the entire Service Procedure as it contains information that is
essential to successfully completing the repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/5
SERVICE PROCEDURE
NOTE: The photos in this procedure are examples and may not look exactly like the vehicle
you are working on.
Lock Nut
1. Remove the front or rear (depending on
model) wheel bearing Cotter Pin and
Lock Nut from the axle.
NOTE: Do not remove the axle from
the hub or transmission for this bulletin.
Cotter pin
Figure 1
2. Push axle back to allow application of
Molykote® M77 Grease.
3. Apply a moderate coat of Molykote®
(P/N 44003-7S000) to the entire
(front or rear) wheel hub bearing
surface (see Figure 2).
Bearing surface
4. Re-install the (front or rear) wheel
bearing Lock Nut and Cotter Pin.

Figure 2
Refer to the model-specific
ESM for wheel bearing Lock
Nut replacement requirements and torque specifications.

For LEAF vehicles: Install the washer listed in the Parts Information before
installing the new Lock Nut.
IMPORTANT: Please see page 3 for important torque information on:
 2007-2015 Versa (Hatchback, Sedan, Note)
 2013 LEAF
2/5
NTB12-055e
IMPORTANT (for 2007-2015 Versa Sedan, Versa Hatchback, Versa Note only):

Tighten the center Lock Nut to 180 N•m (18.4 kg-m, 133 ft-lb) with a torque
wrench.
 If the center Lock Nut is tightened more than 180 N•m (18.4 kg-m, 133 ftlb), the clicking noise could occur.
 If the center Lock Nut is tightened less than 180 N•m (18.4 kg-m, 133 ft-lb),
looseness could occur.
 If the center Lock Nut is reused, the clicking noise could occur.
IMPORTANT (for 2013 LEAF only):

Install the washer.

Tighten the center Lock Nut to 121 N•m (12.3 kg-m, 89 ft-lb) with a torque
wrench.
 If the center Lock Nut is tightened more than 121 N•m (12.3 kg-m, 89 ft-lb),
the clicking noise could occur.
 If the center Lock Nut is tightened less than 121 N•m (12.3 kg-m, 89 ft-lb),
looseness could occur.
 If the center Lock Nut is reused, the clicking noise could occur.
5.
Test drive the vehicle to confirm the issue is resolved.
3/5
NTB12-055e
PARTS INFORMATION
DESCRIPTION
Cotter Pin
PART NUMBER
40073-0L700
QUANTITY
As Needed
Molykote M77 Grease
Nut-Lock, Wheel Bearing
44003-7S000
(2)
As Needed (1)
As Needed (3)
Nut-Lock, Wheel Bearing (For LEAF only)
40262-1CA0A
As Needed
Washer (For LEAF only)
40037-1CA0A
As Needed
(1) Order from your local Parts Distribution Center (PDC).
(2) Refer to the Electronic Parts Catalogue (FAST or equivalent) for model specific part
number.
(3) Refer to the applicable ESM for replacement requirements.
NOTE: P/N 44003-7S000 (Molykote M77 Grease) is considered a shop supply. DO
NOT include it on your warranty claim.
CLAIMS INFORMATION
Submit a Primary Part (PFP) line claim using the following claims coding:
ONE SIDE
Versa & Cube
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
APPLY GREASE TO FRONT BEARING
(1)
MX22AA
ZL
21
0.4
SURFACE (ON CAR, ONE SIDE)
(1) Reference the FAST part catalog and use front hub bearing part number as the PFP.
Altima, Sentra, Quest, Juke, Rogue, Maxima, Murano, 370Z, LEAF, Pathfinder, NV200,
NV200 Taxi
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
APPLY GREASE TO BEARING SURFACE
(ON CAR, ONE SIDE)
(1)
MX22AA
ZL
21
0.5
(1) Reference the FAST part catalog and use front hub bearing part number as the PFP.
4/5
NTB12-055e
BOTH SIDES
Versa & Cube
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
APPLY GREASE TO FRONT BEARING
SURFACE (ON CAR, BOTH SIDES)
(1)
MX23AA
ZL
21
0.5
(1) Reference the FAST part catalog and use front hub bearing part number as the PFP.
Altima, Sentra, Quest, Juke, Rogue, Maxima, Murano, LEAF, Pathfinder, NV200,
NV200 Taxi
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
APPLY GREASE TO BEARING SURFACE
(ON CAR, BOTH SIDES)
(1)
MX23AA
ZL
21
0.6
(1) Reference the FAST part catalog and use front hub bearing part number as the PFP.
370Z
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
APPLY GREASE TO REAR BEARING
SURFACE (ON CAR, BOTH SIDES)
(1)
MX23AA
ZL
21
0.7
(1) Reference the FAST part catalog and use front hub bearing part number as the PFP.
5/5
NTB12-055e