ITB10-067C

Classification:
Reference:
Date:
FA10-007C
ITB10-067C
February 22, 2023
WHEEL BEARING COLLISION DAMAGE
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
All Infiniti
SERVICE INFORMATION
Impacts to wheel bearings (such as a collision or other suspension damage) may create slight indents in the
bearing surfaces. These indents may not be visible but can cause bearing noise.
HINT: Hub/bearing replacement due to impact (collision or other suspension damage) is not a warrantable
repair.
If a vehicle has visible wheel or suspension damage due to impact (collision or other suspension damage), it is
recommended that the wheel bearing assembly be inspected as follows:
1. Remove the hub/bearing assembly from the vehicle.
2. Hold the hub/bearing assembly with both hands.
3. Rotate the hub/bearing assembly in both directions
(clockwise and counterclockwise).
4. If any gritty or rough feeling is detected in the bearing,
replace it with a new one.
Figure 1
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe
that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this
applies to your vehicle.
1/2
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
October 21, 2010
ITB10-067
December 17, 2020
ITB10-067a
November 18, 2021
ITB10-067B
February 22, 2023
ITB10-067C
DESCRIPTION
Original bulletin published
Publication date updated to include the latest models and
model years
Publication date updated to include the latest models and
model years
Publication date updated to include the latest models and
model years
2/2
ITB10-067C