TSB-GEN085

GROUP
GEN
MODEL
ALL
NUMBER
085
DATE
November 2016
TECHNICAL SERVICE BULLETIN
MANDATORY REPLACEMENT OF
LOCKING/SECURITY HARDWARE
SUBJECT:
By design, certain fasteners utilized in various Kia models are strictly intended for “one time
use”. Though not limited to the following, some examples are: axle shaft nuts with stake collar,
cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners
with pre-applied “thread-locking adhesives.”
WARNING
Do not re-use these parts during re-assembly. Always replace with new parts to
maintain the proper locking feature of the design. Failing to do so may result in
unintended loosening and/or loss of the fasteners, which in turn could lead to the
loss of an assembly’s integrity.
Always use the appropriate tools (e.g., torque wrench) to follow the tightening
specifications for the fastener.
Cotter Pin
Pre-Applied Thread Lock
Axle Nut with Stake Collar
File Under: General
Circulate To:
X General Manager


X Service Advisors

X Technicians

X Service Manager

X Parts Manager

X Body Shop Manager 
X Fleet Repair