TSB-GEN085R1

GROUP
GEN
MODEL
ALL
NUMBER
085
(Rev 1, 01/18/2017)
DATE
November 2016
TECHNICAL SERVICE BULLETIN
MANDATORY REPLACEMENT OF
LOCKING/SECURITY HARDWARE
SUBJECT:
 NOTICE
This bulletin has been revised to include additional information. New/revised
sections of this bulletin are indicated by a black bar in the margin area.
By design, certain fasteners, which are designed to lock into place once fully attached, are
utilized in various Kia models and are strictly intended for “one time use.” Some examples are:
axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar
hardware, including threaded fasteners with pre-applied “thread-locking adhesives.” It is critical
for technicians to be aware that ALL such locking fasteners, regardless of type, are for “one
time use” only.
WARNING
Do not re-use these parts during re-assembly. Always replace with new parts to
maintain the proper locking feature of the design. Failing to do so may result in
unintended loosening and/or loss of the fasteners, which in turn could lead to the
loss of an assembly’s integrity and serious personal injury or death.
Always use the appropriate tools (e.g., torque wrench) to follow the tightening
specifications for the fastener.
Cotter Pin
Pre-Applied Thread Lock
Axle Nut with Stake Collar
File Under: 
Circulate To:
X General Manager


X Service Advisors

X Technicians

X Service Manager

X Parts Manager

X Body Shop Manager 
X Fleet Repair