PIC5088F
Service Bulletin Details
Public Details for: PIC5088F
This preliminary information communication advises the technician on the steps to diagnose and repair the concern. The vehicle's xm radio only has xm preveiw channels.
- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 -
Models from 2017
Models from 2016
Models from 2015
Models from 2014
Models from 2013
Models from 2012
Models from 2011
Models from 2010
Models from 2009
Models from 2008
Models from 2007
Models from 2006
Models from 2005
Models from 2004
Models from 2003
Models from 2002
Bulletin No.: PIC5088F Date: Apr-2016 Subject: XM Band Not Receiving All Channels (Preview Mode) Models: 2002-2017 GM Passenger Cars & Light-Duty Trucks With XM Radio (RPO U2K, UBS, or U2M) This PI was superseded to update Model Years. Please discard PIC5088E. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition/Concern Some customers may report that they are not receiving all channels on the XM band. Usually they will only be receiving up to 10 channels (preview mode). Recommendation/Instructions In most cases this has been found to be an account activation concern. Technicians should connect the Scan Tool and verify and record the current Digital Radio Receiver Status under Data Display. Note: It is important to record this information for reference Note: The following information currently cannot be obtained on the 2008 - 2014 Cadillac CTS, 2009 - 2013 Chevy Aveo/Pontiac G3 using the Tech2 due to the XM receiver being integrated into the radio assembly. The first line labeled Digital Radio Receiver status will show one of the following: Unknown, OK or Failed. The second line labeled Digital Radio Receiver Status will display a number of 00 - 04. 00 - Binding Unknown (Have not completed power up sequence) 01 - Binding OK and Unit Activated 02 - Binding OK, Activation Required 03 - Binding Fail - CAP Error 04 - Unbound C90 IC If the DRR status is showing 00, back out of menu and recheck. The DRR may not have powered up completely. If 01 or 02 are displayed the system may need to have a refresh (procedure below) sent or further account research performed to correct the concern. If either 03 or 04 are displayed then the DRR will need to be replaced. Refer to eSI for the specific vehicle for module replacement instruction. A replacement DRR or Radio can be obtained through the local radio exchange center. Be sure to follow all current restriction processes for DRR and Radio replacements. To Reactivate/Refresh the XM Digital Radio Receiver, follow the steps below: 1. Tune radio to XM Channel 1 (Preview Channel), verify audio is heard. Tune to XM Channel 0 to obtain 8 digit XM radio ID. Allow 3-5 seconds for the text to page from XM RADIO ID to the actual ID number (press the clock button on the top-left bank of buttons if the display times out and returns to the date/time page). If Channel 0 cannot be tuned, connect the scan tool and navigate to the Module ID Information page and record the Radio ID. The Radio ID info is 8 alphanumeric characters. 2. Go to XM refresh website www.xmradio.com/oemrefresh and enter the 8 digit XM radio ID. 3. Park the vehicle where it may receive a clear satellite signal and have the vehicle running. 4. Tune radio to XM Channel 1 (Preview Channel). 5. The process may take up to 30 minutes to receive the complete XM. Channel list. Notice: The refresh signal will be sent for 3 hours. The vehicle must be powered up within the 3 hour window to receive the refresh signal. 1 6. Verify the channels in the current channel lineup are available, to verify if the activation is complete. Notice: Occasionally XM will run an expanded preview mode where more than the normal preview channels will be heard (holidays, promotions, etc.) If the radio is also intended to receive data services (e.g. NavTraffic, local forecast, Travel Link fuel and movie info, etc.), verify these authorized services are also received. If the channels are not available, tune back to XM. Channel 1 and continue the refresh. 7. If the Digital Radio Receiver refresh was not successful, a second refresh attempt should NOT be performed within 3 hours of the first refresh request expiring. 8. If the online refresh is unsuccessful then it will be necessary to contact a live XM Customer Assistance Advisor for assistance. US: www.xmradio.com or 1-800-556-3600 prompt 2 Canada: www.xmradio.ca or 1-877-438-9677 The advisor may need to manually make changes to the account to resolve the activation concern. Warranty Information The correction for this concern may be one of several repairs described above. For vehicles repaired under warranty, please use the appropriate warranty labor operation based on the actual cause and repair. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information. WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION 2