NTB16-028D
Service Bulletin Details
Public Details for: NTB16-028D
Intelligent key buttons inoperative but request switches work this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.
- 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 -
Models from 2021
2021 NISSAN ALTIMA |
2021 NISSAN KICKS |
2021 NISSAN MAXIMA |
2021 NISSAN MURANO |
2021 NISSAN ROGUE |
2021 NISSAN ROGUE SPORT |
2021 NISSAN SENTRA |
2021 NISSAN TITAN |
2021 NISSAN TITAN XD |
2021 NISSAN VERSA |
Models from 2020
Models from 2019
2019 NISSAN ALTIMA |
2019 NISSAN KICKS |
2019 NISSAN MAXIMA |
2019 NISSAN MURANO |
2019 NISSAN PATHFINDER |
2019 NISSAN ROGUE |
2019 NISSAN ROGUE HYBRID |
2019 NISSAN ROGUE SPORT |
2019 NISSAN TITAN |
Models from 2018
2018 NISSAN ALTIMA |
2018 NISSAN KICKS |
2018 NISSAN MAXIMA |
2018 NISSAN MURANO |
2018 NISSAN PATHFINDER |
2018 NISSAN ROGUE |
2018 NISSAN ROGUE HYBRID |
2018 NISSAN ROGUE SPORT |
2018 NISSAN TITAN |
Models from 2017
2017 NISSAN ALTIMA |
2017 NISSAN JUKE |
2017 NISSAN MAXIMA |
2017 NISSAN MURANO |
2017 NISSAN PATHFINDER |
2017 NISSAN ROGUE |
2017 NISSAN ROGUE HYBRID |
2017 NISSAN ROGUE SPORT |
2017 NISSAN TITAN |
Models from 2016
2016 NISSAN ALTIMA |
2016 NISSAN JUKE |
2016 NISSAN MAXIMA |
2016 NISSAN MURANO |
2016 NISSAN MURANO HYBRID |
2016 NISSAN PATHFINDER |
2016 NISSAN ROGUE |
2016 NISSAN TITAN |
Classification: Reference: KS16-015D Date: NTB16-028D June 7, 2021 INTELLIGENT KEY BUTTONS INOPERATIVE BUT REQUEST SWITCHES WORK This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. APPLIED VEHICLES: 2015-2018 Altima (L33) 2019-2021 Altima (L34) 2015-2017 Juke (F15) 2018-2021 Kicks (P15) 2016-2021 Maxima (A36) 2015-2021 Murano (Z52) 2016 Murano Hybrid (Z52H) 2015-2021 Pathfinder (R52) 2016-2020 Rogue (T32) 2021 Rogue (T33) 2017-2019 Rogue Hybrid (T32H) 2017-2021 Rogue Sport (J11) 2020-2021 Sentra (B18) 2016-2021 Titan/Titan XD (A61) 2020-2021 Versa (N18) SERVICE INFORMATION For the Applied Vehicles: If all buttons (lock / unlock / panic / trunk) on an Intelligent Key(s) do not work, AND With the Intelligent Key in range, the doors will lock and unlock when pressing either front door request switch (see Figure 1), THEN Figure 1 Front door request switch That specific Intelligent Key may have become de-synchronized with the vehicle. NOTE: Intelligent Key de-synchronization may occur if the Intelligent Key is not used for an extended period of time, or if the Intelligent Key was not operating due to low battery condition and the battery has been replaced. DO NOT replace the BCM, Intelligent Key, or any other parts if an Intelligent Key only needs to be re-synchronized. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/4 Test Intelligent Key Synchronization 1. Start the engine with the Intelligent Key inside the vehicle. If successful: Turn the engine OFF, and then exit the vehicle. Proceed to step 2. If unsuccessful: Push the ignition button to ON (engine OFF), and open the driver’s side window. Skip to step 4. 2. Press any button on the Intelligent Key to confirm that the vehicle responds correctly. If OK: The issue is resolved and no further action is required. If NG: Proceed to step 3. 3. Re-enter the vehicle with the Intelligent Key, push the ignition button to ON (engine OFF), and open the driver’s side window. 4. Turn the ignition OFF and exit the vehicle. 5. Place the Intelligent Key outside the vehicle, a minimum distance of 10 feet away to avoid detection of the Intelligent Key by the vehicle. See Figure 2 below. Vehicle antennas must not detect key during this procedure Place Key at least 10 feet from vehicle Figure 2 2/4 NTB16-028D 6. Re-enter the vehicle and close the door. NOTE: DO NOT open the driver’s or passenger’s side door during steps 7-9. IMPORTANT: The next three steps MUST be performed in close time and sequence together in order for the test to be performed correctly. It is recommended that you read and understand the steps before continuing. 7. Press the ignition button, and then immediately perform step 8. 8. Within 30 seconds, have an associate hand the Intelligent Key to you through the open window, and then immediately perform step 9. 9. Without pressing the ignition button, place the Intelligent Key in front of the ignition button, as shown in Figure 3 (upper back of the key aligns with center of the ignition button), and listen for two short tones. Figure 3 If two short tones are heard: The Intelligent Key is now re-synchronized and should function normally again. Proceed to step 10 on the next page. If no tones are heard, and the Intelligent Key buttons still do not work: Refer to ASIST or the applicable Electronic Service Manual for further diagnosis. 3/4 NTB16-028D 10. Confirm “PUSH BRAKE AND START BUTTON TO DRIVE” is displayed in the vehicle information display in the combination meter (see Figure 4). Figure 4 11. Confirm Intelligent Key operation by testing all the buttons. AMENDMENT HISTORY PUBLISHED DATE March 15, 2016 REFERENCE DESCRIPTION NTB16-028 Original bulletin published June 24, 2016 NTB16-028A Title, SERVICE INFORMATION section, and page 3 revised February 4, 2019 NTB16-028B APPLIED VEHICLES and Test Intelligent Key Synchronization procedure revised March 15, 2021 NTB16-028C Classification number updated June 7, 2021 NTB16-028D APPLIED VEHICLES revised 4/4 NTB16-028D