MT-002-21a

Service Bulletin Details

Public Details for: MT-002-21a

Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include e10 and e85. E10: a blend of 10% ethanol and 90% gasoline. E85: a blend of


- 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -

Models from 2003
2003 MAZDA MAZDA6
BULLETIN NOTES
This M-Tip supersedes the previously issued M-Tip listed below. The changes are noted in Red text.
Previous M-Tip
Date(s) Issued
MT-002/21
9/24/2021,10/13/2021
MT-005/09
2009
APPLICABLE MODEL(S)/VINS
2003-2021 Mazda6
2006-2015 Mazda5
2007-2021 CX-9
2016-2021 CX-3
2004-2021 Mazda3
2006-2021 MX-5
2011-2014 Mazda2
2020-2021 CX-30
2004-2011 RX-8
2007-2012 CX-7
2013-2021 CX-5
DESCRIPTION
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline
station. Typical blends of ethanol include E10 and E85.
• E10: A blend of 10% ethanol and 90% gasoline
• E85: A blend of 85% ethanol and 15% gasoline
All Mazda vehicles can run on gasoline containing up to 10% ethanol (E10) but only some 1999-2001 B3000 trucks can
run on gasoline with more than 10% ethanol blended.
• E10 compatible vehicles: All Mazda vehicles
• E85 compatible vehicles: 1999-2001 B3000 Mazda trucks with the 8th VIN digit is V.
What if a customer puts E85 in there Mazda vehicle?
Symptoms include:
•
•
•
•
•
•
Rough Running
Engine hard start
Lean Codes (Examples: P0171 and/or P2096)
Misfires and/or misfire codes (Examples: P0300, P0301, P0302, P0303 OR P0304)
Lack of power
Poor fuel economy
Page 1 of 3
10/15/2021 09:44 AM tlawrenc
• Spark knock
• Mechanical engine damage
How do I test for Ethanol in gasoline?
We can add water to a gasoline sample to determine how much ethanol is in the gasoline.
1. Pour 8ml of the fuel sample into the graduated cylinder.
2. Add 2ml of water to the fuel sample bringing the total height of the fuel and water mixture to 10ml.
3. Cover the open end of the graduated cylinder and shake the fuel sample.
4. Let fuel sample sit until the water and gasoline separate.
5. Inspect the water/fuel separation. If the separation line on graduated cylinder is:
• 2ml = No ethanol in gasoline
• 2ml – 3ml = 10% ethanol in gasoline
• 3ml – 10ml = More than 10% ethanol in gasoline
Page 2 of 3
10/15/2021 09:44 AM tlawrenc
Page 3 of 3
10/15/2021 09:44 AM tlawrenc


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.