Mazda Mazda3-5-door-turbo-4wd 2022
Vehicle Details: Safety Ratings, Decoded VIN Details, Service Bulletins
Below you will find all available information on the 2022 Mazda Mazda3 4 DR FWD, manufacturered by Auto Alliance International, Usa.
The vehicle is described as a 4x2 5-door/4-door hatchback.
The overall safety rating for this vehicle is: 5
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| MAZDA | 1YV 3MZ JM1 JM3 | Regular Gasoline |
MAZDA VIN Decoder
Use the box here to look up VINs from MAZDA as well as other manufacturers
Frequently Asked Questions
-
What is the MPG of a 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD?
- The 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD has an EPA estimated city efficiency of 6.7 MPG and an estimated highway efficiency of MPG.
-
What is the safety rating of the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD?
- The overall safety rating of the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD is 5 stars.
-
What is the annual fuel cost for the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD?
- EPA estimated annual fuel cost for the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD is $1540.
-
Where is the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD produced?
- The 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD is produced in Hofu Yamaguchi, Japan.
-
Does the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD work with Apple Carplay?
- The MAZDA3-5-DOOR-TURBO-4WD does support Apple Carplay.
-
Does the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD work with Android Auto?
- The MAZDA3-5-DOOR-TURBO-4WD does have Android Auto support.
-
How much horsepower does the 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD have?
- The 2022 MAZDA MAZDA3-5-DOOR-TURBO-4WD has 186 horsepower.
Available Engine & Drive Classes
- 2L 4 cylinder 6-speed automatic with select shift
- 2.5L 4 cylinder 6-speed automatic with select shift
Safety details for the 2022 Mazda Mazda3 4 DR FWD
The overall safety rating for this vehicle is: 5
| Front Crash Rating | Front Drivers Side | Front Passenger Side |
|---|---|---|
| 5 | 5 | 5 |
| Side Crash Rating | Side Drivers Side | Side Passenger Side |
| 5 | 5 | 5 |
| Side Pole Crash Rating | Rollover Rating | Rollover Possibility |
| 5 | 5 | 0.101 |
Safety details for the 2022 Mazda Mazda3 4 DR AWD
The overall safety rating for this vehicle is: 5
| Front Crash Rating | Front Drivers Side | Front Passenger Side |
|---|---|---|
| 5 | 5 | 5 |
| Side Crash Rating | Side Drivers Side | Side Passenger Side |
| 5 | 5 | 5 |
| Side Pole Crash Rating | Rollover Rating | Rollover Possibility |
| 5 | 5 | 0.101 |
Safety details for the 2022 Mazda Mazda3 5 HB FWD
The overall safety rating for this vehicle is: 5
| Front Crash Rating | Front Drivers Side | Front Passenger Side |
|---|---|---|
| 5 | 5 | 5 |
| Side Crash Rating | Side Drivers Side | Side Passenger Side |
| 5 | 5 | 5 |
| Side Pole Crash Rating | Rollover Rating | Rollover Possibility |
| 5 | 5 | 0.101 |
Safety details for the 2022 Mazda Mazda3 5 HB AWD
The overall safety rating for this vehicle is: 5
| Front Crash Rating | Front Drivers Side | Front Passenger Side |
|---|---|---|
| 5 | 5 | 5 |
| Side Crash Rating | Side Drivers Side | Side Passenger Side |
| 5 | 5 | 5 |
| Side Pole Crash Rating | Rollover Rating | Rollover Possibility |
| 5 | 5 | 0.101 |
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- SA-022-24 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
- SA-017-24a - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / st
- 09-001-24c - UNKNOWN OR OTHER: Some customers may experience a a??Telematics malfunctiona?? Message in the instrument cluster with dtc U3000:04-tcu (telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the t
- 07-003-24 - ELECTRICAL SYSTEM: Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 a?F (10 a?C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by in
- SA-024-24 - ENGINE AND ENGINE COOLING: A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to mazda dealers (due to loading and unloading from transport trucks or customers moving their v
- SA-007-24a - SERVICE BRAKES, HYDRAULIC: This information will give you the necessary knowledge to respond to customers concerns of smart brake support (sbs) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the ve
- 09-023-24 - ELECTRICAL SYSTEM: Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: the touch sensor of the front door outer handle does not lock the doors after rai
- SA-026-24 - AIR BAGS: A customer may complain of a rattle noise from the right side of the dash. The noise may be coming from the passenger side airbag.
- SA-023-24 - STRUCTURE:BODY:HOOD: The customer may report a rattling noise from the front of the vehicle under load. It may sound as if it is coming from the dashboard, but it is coming from the hood prop rod (aka lock-bonnet stay). The prop rod diameter was increased in no
- SA-021-24 - ELECTRICAL SYSTEM: Some customers may complain about intermittent audio no sound from the mazda connect infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the mazda connect center display a
- SA-017-24 - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / st
- SA-016-24 - SERVICE BRAKES, HYDRAULIC: Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
- PF-24-03 - POWER TRAIN: Due to limitations, certain vehicles from 2016 to current models might display an inaccurate transmission part number in the global electronic parts catalog (gepc). To provide support in such cases, a temporary lookup guide has been develop
- 09-020-24 - ELECTRICAL SYSTEM: Some customers may experience that, with a specific operation, the touch sensor of front door outer handle does not lock and unlock the doors but the remote transmitter operates correctly. Description of the specific operations: specific o
- 09-014-24 - STRUCTURE:BODY: When encountering a vehicle with paint damage, refer to the "mazda paint warranty guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
- 09-001-24b - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Some customers may experience a a??Telematics malfunctiona?? Message in the instrument cluster with dtc U3000:04-tcu (telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the t
- 04-001-24 - SERVICE BRAKES, HYDRAULIC: Symptom 1: some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. Symptom 2: some vehicles may exhibit a squeal noise from the rear brakes
- SA-009-24a - ENGINE AND ENGINE COOLING: Frequently asked questions (faq): general questions, reception level inspection, setup and getting started, dealer processes, registration / enrollment, tcu activation, wi-fi general information, conditions for remote engine start will not
- SA-009-24 - ENGINE AND ENGINE COOLING: Frequently asked questions (faq): general questions, reception level inspection, setup and getting started, dealer processes, registration / enrollment, tcu activation, wi-fi general information, conditions for remote engine start will not
- SA-011-24 - STEERING: Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
- SA-006-24 - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- SA-014-24 - TIRES: Some customers may complain that the tire sidewalls are distorted or "damaged". Sidewall waviness/indentations/undulations are common on radial tires and are more noticeable on tires with taller sidewalls. The higher the tire pressure, the
- SA-013-24 - SUSPENSION: Some vehicles may exhibit a steering shimmy or body vibration during the pdi test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be
- SA-007-24 - SERVICE BRAKES, HYDRAULIC: Note: before proceeding, perform mgss vehicle inquiry (mgss -> other applications -> warranty veh. Inq. -> recalls / special service programs -> status) and check for open campaigns. If any of the following campaigns are open, complete the
- 09-001-24a - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Some customers may experience a a??Telematics malfunctiona?? Message in the instrument cluster with dtc U3000:04-tcu (telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the t
- 09-001-23a - ELECTRICAL SYSTEM: Some vehicles may exhibit an a??In vehicle network malfunctiona?? Message appearing in the instrument cluster with dtc U3000:04-tcu (telematics communication unit internal malfunction) stored after the connected service contract has been di
- 01-005-23a - ENGINE AND ENGINE COOLING: Some customers may experience the check engine light on with dtc P0126:00 (thermostat stuck open) and one or more of the following symptoms: the engine takes longer to warm up the engine temperature gauge fluctuates the low coolant tempe
- SA-081-23 - ENGINE AND ENGINE COOLING: There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. This service alert is to inform you about the water pump sealing mechanism and the criteria if r
- SA-082-23 - STEERING: Before judging a steering wheel as having premature wear or a defect, first clean the steering wheel as explained in the repair information. Some vehicles may have steering wheel stains caused by chemicals such as hand lotions.
- SA-025-23a - ELECTRICAL SYSTEM: When the telematics control unit (tcu) replacement is necessary due to a failure, use mdars to activate the new tcu after replacement. Use the information in this service alert to initialize the new tcu until the procedure on mgss is update
- SA-021-23b - ELECTRICAL SYSTEM: Qi wireless charger symptom troubleshooting
- SA-015-23e - ELECTRICAL SYSTEM: Frequently asked questions (faq): general questions reception level inspection setup and getting started dealer processes registration / enrollment tcu activation wi-fi general informatio conditions for remote engine start will not
- SA-079-23 - VISIBILITY: Some customers may complain about color discrepancies (brightness differences) of the image displayed on the screen when using the 360a?View monitor. As this phenomenon is not a system failure, do not make any repairs or replace any parts.
- SA-077-23 - SERVICE BRAKES, HYDRAULIC: This information will give you the necessary knowledge to respond to customers concerns of smart brake support (sbs) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the ve
- SA-027-23c - ELECTRICAL SYSTEM: In-vehicle network malfunction error message and master warning light on with dtc U3000:04 (telematics communication unit internal malfunction) stored.
- 09-039-23 - ELECTRICAL SYSTEM: Some customers may experience no sound from the audio system and/or the audio source cannot be changed. This concern may be caused by the remote tuner not operating properly under certain situations. To eliminate this concern, the remote tu
- 09-038-23 - SUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM: Some customers may complain about the poor appearance due to an uneven rear beltline molding joint. This concern is caused by the rear beltline molding not being manufactured according to the original designed shape. To eliminate this conce
- 09-029-23a - ELECTRICAL SYSTEM: Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: the touch sensor of the front door outer handle does not lock the doors after rai
- 09-007-23c - SEATS: At pdi or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.
- 05-005-23a - POWER TRAIN: Some vehicles may exhibit a chirp noise (stick-slip noise) from the automatic transaxle (at) when shifting from 3 to 4 while driving. This may be caused by the automatic transaxle fluid (atf) being contaminated by iron powder due to excessi
- 01-007-23a - ELECTRICAL SYSTEM: The mazda dca-8000 is required for all warranty battery testing. If the mazda dca-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to test
- SA-032-23a - ENGINE AND ENGINE COOLING: If you encounter any type of electrical concern (e.G, dead battery, engine no start, dtc(s) stored...), interview the customer before proceeding with normal mgss diagnosis by asking if any aftermarket devices have been installed. Aftermarke
- 05-005-23 - POWER TRAIN: Some vehicles may exhibit a chirp noise (stick-slip noise) from the automatic transaxle (at) when shifting from 3 to 4 while driving. This may be caused by the automatic transaxle fluid (atf) being contaminated by iron powder due to excessi
- 01-010-23a - ENGINE AND ENGINE COOLING: Some customers may complain about engine surging 100-200 rpm when accelerating up a hill at altitudes around 6,700 feet or higher. This concern may be caused by improper pcm control software in particular situations. To eliminate this conce
- SA-009-23i - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / stop
- SA-042-23a - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): Some customers may complain about the active driving display not displaying turn by turn (tbt) travel direction or navigation information.
- SA-059-23 - ELECTRICAL SYSTEM: When the power windows are operated many times without being fully closed, small errors of the window position sensor may accumulate and cause improper operation of the jam-safe function. To reduce the risk of this occurrence, the auto func
- SA-068-23 - STRUCTURE:BODY:ROOF AND PILLARS: Some vehicles may have a water leak and/or a technician may find water inside the cabin or within a component. The source of the leak may be from between the doors at the b-pillar. To correct this concern, there was a mass production change
- SA-039-23a - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
- SA-003-23a - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur
- PF-23-09 - EQUIPMENT: Mnao has recently found an increase in non-returned cores within the united radio (ur) exchange program. As a reminder, dealers have 90 days, after the order is placed, to return the exchanged part. Failure to return the exchanged part wil
- 09-033-23 - STRUCTURE: Some vehicles may exhibit that the glass run channel of the front door interferes with the rear door garnish. Since the front door glass run channel is not fixed to the door strongly enough for the following situations, cycles of door opera
- 04-002-23c - BRAKES (PWS): Symptom 1: some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. Symptom 2: some vehicles may exhibit a squeal noise from the rear brakes
- SA-050-23 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Some customers may complain about scratches on the instrument cluster lens.
- SA-021-23b - ELECTRICAL SYSTEM: Qi wireless charger symptom troubleshooting
- SA-021-23a - ELECTRICAL SYSTEM: Qi wireless charger symptom troubleshooting
- SA-009-23h - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / stop
- SA-009-23g - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / stop
- SA-049-23a - EQUIPMENT:ELECTRICAL:INFOTAINMENT: Some customers may experience infotainment door rattle noise. Follow the repair procedure to help determine the cause.
- SA-048-23 - EQUIPMENT:ELECTRICAL:INFOTAINMENT: Some customers may experience an infotainment sub-woofer rattle noise. Follow the repair procedure to help determine the cause.
- SA-037-23a - ENGINE AND ENGINE COOLING: A new cylinder head assembly for service parts has been newly established for skyactiv-g 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (in/ex) are included in the new assem
- 01-010-23 - ENGINE AND ENGINE COOLING: Some customers may complain about engine surging 100-200 rpm when accelerating up a hill at altitudes around 6,700 feet or higher. This concern may be caused by improper pcm control software in particular situations.
- SA-039-23 - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
- SA-027-23b - ELECTRICAL SYSTEM: Some customers may experience the following: in-vehicle network malfunction error message, master warning light on, connected vehicle reception icon shows "x".
- SA-042-23 - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): Some customers may complain about the active driving display not displaying turn by turn (tbt) travel direction or navigation information.
- SA-009-23F - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start /
- 16-008-23 - ELECTRICAL SYSTEM: Updated software release for concerns with mazda connect infotainment system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (ver. 7000c0a-na01_12006 or later).
- 16-006-23 - ELECTRICAL SYSTEM: Updated software release for concerns with mazda connect infotainment system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (ver. 7000c0a-na06_12018 or later).
- 09-029-23 - ELECTRICAL SYSTEM: Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: the touch sensor of the front door outer handle does not lock the doors after rai
- 09-028-23 - EQUIPMENT:ELECTRICAL: Some cx-5 and cx-30 customers may find that the liftgate does not close when pressing the power liftgate (plg) rear switch (a) located on the interior liftgate trim. This may be caused by plg switch corrosion. Water from a high pressure c
- 09-014-23a - VISIBILITY:REARVIEW MIRRORS/DEVICES: Some vehicles may experience white-streak stains appearing on the front door that look like they seeped out from under the outer mirror base. This is caused by water intruding from gaps of the outer mirror body and/or the hinge of the oute
- 09-012-23b - ELECTRICAL SYSTEM: Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. Dtcs B1030:13 and/or b10
- 08-003-23a - AIR BAGS: Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with dtc B1126:13 and/or B1127:13 stored in memory. B1126:13 - driver-side side air bag module circuit open circuit or resistance hig
- SA-037-23 - ENGINE AND ENGINE COOLING: A new cylinder head assembly for service parts has been newly established for skyactiv-g 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (in/ex) are included in the new ass
- SA-036-23 - STRUCTURE: Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surf
- SA-027-23a - ELECTRICAL SYSTEM: In-vehicle network malfunction and master warning light on. Dtc U3000:04 stored (does not apply to 09-001/23)
- SA-015-23d - ENGINE AND ENGINE COOLING: Connected services, frequently asked questions (faq)
- SA-009-23e - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start /
- SA-008-23a - TIRES: Some vehicles may exhibit a steering shimmy or body vibration during the pdi test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be
- 09-024-23 - ELECTRICAL SYSTEM: Some customers may experience that the out-of-area (reception area) type auto lock function sometimes fails. When the front door is being closed with a hand touching one or both of the touch sensors on the front outer handle, the out-of-are
- 09-007-23b - SEATS: At pdi or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.
- SA-032-23 - ENGINE AND ENGINE COOLING: If you encounter any type of electrical concern (e.G, dead battery, engine no start, dtc(s) stored...), interview the customer before proceeding with normal mgss diagnosis by asking if any aftermarket devices have been installed. Aftermarke
- SA-031-23 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
- SA-015-23c - ENGINE AND ENGINE COOLING: Frequently asked questions (faq)
- SA-009-23d - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following:1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / stop,
- SA-005-23a - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- 16-003-23 - ELECTRICAL SYSTEM: Some customers may complain that mazda connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the cmu failing at startup due to a d
- 09-021-23 - VISIBILITY:GLASS, SIDE/REAR: Some vehicles may experience a gap between the glass and the rear door glass run-channel due to run-channel deformation. This causes poor appearance and wind noise when driving at high speed. This concern is due to the incorrect shape of th
- 09-018-23a - VISIBILITY:GLASS, SIDE/REAR: Some vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the
- 08-003-23 - AIR BAGS: Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with dtc B1126:13 and/or B1127:13 stored in memory.
- 01-007-23 - ELECTRICAL SYSTEM: The mazda dca-8000 is required for all warranty battery testing. If the mazda dca-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to test
- SA-018-23a - ELECTRICAL SYSTEM: This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in
- SA-026-23 - ENGINE AND ENGINE COOLING: A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to mazda dealers (due to loading and unloading from transport trucks or customers moving their v
- SA-022-23 - ELECTRICAL SYSTEM: Some customers may complain about an intermittent beep sound (popping sound) every 1-2 minutes while driving. This may be cause by a software error in the navigation sd card.
- SA-025-23 - ELECTRICAL SYSTEM: When the telematics control unit (tcu) replacement is necessary due to a failure, use mdars to activate the new tcu after replacement. Use the information in this service alert to initialize the new tcu until the procedure on mgss is update
- SA-027-23 - ELECTRICAL SYSTEM: In-vehicle network malfunction error message. Dtc U3000:04 (telematics communication unit internal malfunction) stored. Note: the vehicle does not apply to 09-001/23 because csp04 is not "open".
- SA-021-23 - ELECTRICAL SYSTEM: Qi wireless charger symptom troubleshooting
- SA-020/23 - FUEL SYSTEM, GASOLINE: Some customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in tsb 09-019/21 - fuel-filler lid panel is deformed for 2019-2021 mazda
- SA-015-23b - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Mazda connected services - frequently asked questions (fqa)
- SA-009-23c - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following:1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative.Engine start / stop,d
- 09-018-23 - STRUCTURE:BODY:DOOR: Some vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the
- 09-007-23a - SEATS: At pdi or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.
- 01-006-23 - ENGINE AND ENGINE COOLING: Some vehicles may exhibit oil seepage or oil leak onto the engine front cover, which becomes more apparent with dust adhesion.
- SA-012-23 - VISIBILITY: Some customers may report an odor or water in the hvac system and upon inspection, the cabin air filter may be found to be wet.
- SA-018-23 - ELECTRICAL SYSTEM: This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in
- SA-009-23b - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / st
- SA-015-23 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Mazda connect services - frequently asked questions (faq)
- SA-016-23 - EQUIPMENT:ELECTRICAL: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary key trace cut method. B. Auxiliary key code cut method
- eFC-1-21-00443a - AIR BAGS: A technical service bulletin (tsb 08-001 /22 - air bag warning light on with otc B1126: 13 or B1127:13) has been released to repair 2019-2022 mazda3 with otc B1126:13/B1127:13. Follow the tsb to repair the vehicle before replacing the airba
- 09-012-23a - SEATS: Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. Dtcs a??B1030:13a?? And/
- 16-003-23 - ELECTRICAL SYSTEM: Some customers may complain that mazda connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the cmu failing at startup due to a d
- SA-009-23a - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: 1. Infotainment center display does not provide the authorization code (otp) during the mymazda app connected vehicle enrollment. 2. Remote function(s) inoperative. Engine start / stop
- 09-007-23 - SEATS: At pdi or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair spec
- SA-010-23 - SERVICE BRAKES, HYDRAULIC: Some customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection.
- SA-009-23 - ENGINE AND ENGINE COOLING: Some customers may complain about any of the following: infotainment center display does not provide the authorization code during the mymazda app connected vehicle enrollment. Remote function(s) inoperative. Engine start / stop, door lock
- SA-008-23 - STEERING: Some vehicles may exhibit a steering shimmy or body vibration during the pdi test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be
- 07-002-23 - ELECTRICAL SYSTEM: Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 a?F (10a?C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by ina
- 09-014-23 - VISIBILITY: Some vehicles may experience white-streak stains appearing on the front door that look like they seeped out from under the outer mirror base. This is caused by water intruding from gaps of the outer mirror body and/or the hinge of the outer
- 09-012-23 - SEATS: Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. Dtcs a??B1030:13a?? And/
- 01-005-23 - ENGINE AND ENGINE COOLING: Some customers may experience the check engine light on with dtc P0126:00 (thermostat stuck open) and one or more of the following symptoms: the engine takes longer to warm up. The engine temperature gauge fluctuates. The low coolant temper
- 09-006-23 - STRUCTURE: When encountering a vehicle with paint damage, refer to the "mazda paint warranty guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
- 09-001-23 - ELECTRICAL SYSTEM: Some vehicles may exhibit dtc U3000:04 (telematics communication unit internal malfunction) stored after the connected service contract has been discontinued (only vehicles in which the customer opted out of cv services are affected - csp04
- 01-003-23 - ENGINE AND ENGINE COOLING: Some vehicles may have a "low engine oil level" warning message and an engine oil level warning light on in the instrument cluster with dtc P250F:00 stored in memory, and the oil level has actually decreased to near low. - dtc P250F:00 - e
- SA-006/23 - ELECTRICAL SYSTEM: Some customers may complain about the infotainment system and/or the mymazda app showing incorrect clock and/or tire pressures and/or tire pressure missing. This may be caused by: - incorrect calendar entry (month/day/year) after a batter
- SA-005/22 - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- SA-003/23 - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
- RF-23-02 - ELECTRICAL SYSTEM: Due to the supply chain shortages for bdgf-66-5g0g, hardware has been confirmed compatible between bdgf-66-5g0b up to the g suffix. This can be used for repair with vehicles originally equipped with c to g level suffix parts.
- RF-23-01 - ENGINE AND ENGINE COOLING: When servicing skyactiv engine vehicles requiring to replace the oil galley plug and crush washer, order the required part numbers below. These parts are not listed in gepc and were previously listed as "non-serviceable" in the cylinder blo
- 09-001-22b - STRUCTURE: Some vehicles may experience white-streak stains appearing on the front door that look like they seeped out from under the outer mirror base. This is caused by water intruding from gaps of the outer mirror body and/or the hinge of the outer
- 07-004-22b - ELECTRICAL SYSTEM: Some customers may complain the a/c blows warm. This may be caused by one of two things. Cause 1: after accelerating in hot weather, the a/c blows warm air for a longer time than other models. This is caused by improper control software
- 04-006-22 - SERVICE BRAKES, HYDRAULIC: Some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate.
- 01-017-22 - ENGINE AND ENGINE COOLING: Some vehicles may experience an engine stall when hard accelerating from a stop (often difficult to reproduce on a test drive), no codes are stored and the vehicle easily restarts with no other drivability concerns. This is only caused in c
- SA-078-22 - SERVICE BRAKES, HYDRAULIC: Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
- SA-045-22a - VISIBILITY:GLASS, SIDE/REAR: The purpose of this service alert is to remind dealers to keep the protective films on the piano black door garnishes attached until just before delivering the vehicle to the customer. The protective films are attached on new vehicles when
- SA-019-22c - ELECTRICAL SYSTEM: Mazda connected services frequently asked questions (faq)
- SA-017-22d - ELECTRICAL SYSTEM: Some customers may complain about any of the following: * infotainment center display does not provide the authorization code during the mymazda app connected vehicle enrollment. * remote function(s) inoperative. - engine start / stop
- SA-016-22a - EQUIPMENT: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary key trace cut method b. Auxiliary key code cut method
- SA-004-22g - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- MT-004-22 - ENGINE AND ENGINE COOLING: Some vehicles may experience the check engine light on with dtc P0171 (fuel trim too lean) and possibly dtcs p030x (misfire). Vehicles having this concern should use the following inspection/repair procedure.
- SA-075-22 - ELECTRICAL SYSTEM: If you encounter any type of electrical concern (e.G, dead battery, engine no start, dtc(s) stored...), interview the customer before proceeding with normal mgss diagnosis by asking if any aftermarket devices have been installed. Aftermarke
- SA-074-22 - ELECTRICAL SYSTEM: Some customers may complain the hvac system not maintaining the correct temperature or the ambient (outside) temperature reading incorrectly. This is caused by a failure in the ambient temperature sensor. To correct this issue, the ambient
- SA-070-22 - ELECTRICAL SYSTEM: Some customers may complain about intermittent audio no sound from the mazda connect infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the mazda connect center display a
- SA-064-22a - ELECTRICAL SYSTEM: Some customers may comlpain about an intermittent beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation sd card.
- 16-004-22a - ELECTRICAL SYSTEM: Some customers may complain that mazda connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the cmu failing at startup due to a d
- 16-001-22d - ELECTRICAL SYSTEM: Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 7000c0a-na01_12004 or later). Ver. 7000c0a-na01_12004 fixes these software errors (bugs): * album artwork may not appea
- 09-046-22 - ELECTRICAL SYSTEM: Some customers may experience that, with a specific operation, the touch sensor of front door outer handle does not lock and unlock the doors but the remote transmitter operates correctly. Description of the specific operations: - specifi
- 09-044-22 - ELECTRICAL SYSTEM: Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. Dtcs "B1030:13" and/or "
- 09-019-22a - ELECTRICAL SYSTEM: Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. - symptom 1: the touch sensor of the front door outer handle does not lock the doors after r
- 01-011-22a - ENGINE AND ENGINE COOLING: Some vehicles may have a "low engine oil level" warning message and a check engine light illuminated in the instrument cluster with dtc P250F:00 stored in memory, and the oil level has actually decreased to near low. - dtc P250F:00 - engin
- 02-004-22a - SUSPENSION: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
- 16-005-22a - ELECTRICAL SYSTEM: Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (ver. 7000c0a-na06_12012 or later).
- 09-016-22a - EQUIPMENT: Some customers may complain that the rear console lid does not slide smoothly. This may be caused by improperly positioned felt pads attached to the rear console lid lock, which may have moved out of position after repetitive use. The expos
- 07-004-22a - ELECTRICAL SYSTEM: Some customers may complain the a/c blows warm. This may be caused by one of two things. Cause 1: after accelerating in hot weather, the a/c blows warm air for a longer time than other models. This is caused by improper control software of
- 01-012-22 - ENGINE AND ENGINE COOLING: Some vehicles may exhibit accumulation of dried coolant (1) around the water pipe (2). This is caused by a gap between the housing and pipe due to a press fitting during the manufacturing process. The accumulated coolant is solidified and p
- 01-011-22 - ENGINE AND ENGINE COOLING: Some vehicles may have a "ow engine oil level" warning message and a check engine light illuminated in the instrument cluster with dtc P250F:00 stored in memory, and the oil level has actually decreased to near low. * dtc P250F:00 - engine
- SA-068-22 - POWER TRAIN: The new skyactiv-drive fw6a-el at uses "automatic transmission fluid (atf) type: fz". Only use "atf-fz" to fill or top off the fluid level. Atf-fz is specially designed for use in the skyactiv-drive series at. It is a low viscosity formula
- SA-067-22 - ELECTRICAL SYSTEM: Some customers may complain about the following message displayed in the multi-information display: in the following cases, the mrcc with stop & go function system is canceled when the vehicle is traveling at 19 mph (30 km/h) or less: * t
- SA-066-22 - ELECTRICAL SYSTEM: Some vehicles may have one of the following dtcs stored in memory along with a system status notice on the multi-information display or display a system status notice with no dtc: * C1001:92 - forward sensing camera (fsc) poor field of vie
- SA-065-22 - ENGINE AND ENGINE COOLING: Some vehicles equipped with a coolant control valve may exhibit difficulties when refilling the coolant because the control valve is closed and air in the engine cannot escape during ignition on. Therefore, turn the ignition off when refill
- SA-064-22 - ELECTRICAL SYSTEM: Some customers may comlpain about an intermittent beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation sd card.
- SA-019-22b - EQUIPMENT: Mazda connected services frequently asked questions (faqs)
- SA-017-22c - ELECTRICAL SYSTEM: Some customers may complain about any of the following: * infotainment center display does not provide the authorization code during the mymazda app connected vehicle enrollment. * remote function(s) inoperative. - engine start / stop
- SA-008-22a - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
- SA-004-22f - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- 09-030-22a - ELECTRICAL SYSTEM: Some vehicles may experience the mymazda app not communicating to the vehicle properly which may result in the condition monitor information is not refreshed or remote door lock/unlock not functioning. This is caused by a failure in communi
- SA-061-22 - ELECTRICAL SYSTEM: The blind spot monitoring (bsm) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. - bsm system indicates vehicle on the opposite side. - i-activsense indicator ring
- SA-004-22e - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- SA-025-22a - EQUIPMENT: Some customers may experience infotainment door rattle noise. Follow the repair procedure to help determine the cause.
- SA-024-22a - STRUCTURE: Some customers may experience an infotainment sub-woofer rattle noise. Follow the repair procedure to help determine the cause.
- SA-004-22d - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- SA-017-22b - ELECTRICAL SYSTEM: Some customers may complain about any of the following: - infotainment center display does not provide the authorization code during the mymazda app connected vehicle enrollment. - remote function(s) inoperative. - engine start / stop
- SA-059-22 - STRUCTURE: Some customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in tsb 09-019/21 - fuel-filler lid panel is deformed are present.
- SA-057-22 - SUSPENSION: Some vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface
- SA-054-22 - EQUIPMENT ADAPTIVE/MOBILITY: This information will give you the necessary knowledge to respond to customers concerns of smart brake support (sbs) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the ve
- SA-052-22 - VISIBILITY: Some customers may complain that their interior rear view mirror fell off and/or will not stay in place after it is reinstalled. This is due to some mirrors having lower tension on the retaining clips. To eliminate this concern, there was a
- 16-005-22 - ELECTRICAL SYSTEM: Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (ver. 7000c0a-na06_12012 or later).
- 16-004-22 - ELECTRICAL SYSTEM: Some customers may complain that mazda connect does not start or that it takes a long time to restart after starting the vehicle. This is caused by the initialization process with the cmu failing at startup due to a defective circuit board
- 16-001-22c - ELECTRICAL SYSTEM: Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 7000c0a-na01_12002 or later).
- 09-030-22 - ELECTRICAL SYSTEM: Some vehicles may experience the mymazda app not communicating to the vehicle properly which may result in the condition monitor information is not refreshed or remote door lock/unlock not functioning. This is caused by a failure in communi
- 09-028-22 - STRUCTURE: Some vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the
- 09-025-22 - EQUIPMENT: Some vehicles may exhibit a rear console lid with a sticking feeling or a squeaking noise when opening and/or closing. This is caused by an inappropriate shape of the console lid hinge pin where the position of the hinge pin (1) becomes mis
- 09-004-22a - LATCHES/LOCKS/LINKAGES: Some cx-5 and cx-30 customers may find that the liftgate does not close when pressing the power liftgate (plg) rear switch located on the interior liftgate trim. This may be caused by plg switch corrosion. Water from a high pressure car was
- 08-001-22c - AIR BAGS: Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with dtc B1126:13 and/or B1127:13 stored in memory. - B1126:13 - driver-side side air bag module circuit open circuit or resistance h
- SA-050-22 - LATCHES/LOCKS/LINKAGES: Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (plg) not opening automatically. If you confirm that the customer's concern is that the l
- SA-051-22 - SERVICE BRAKES, HYDRAULIC: A customer may complain that they have a brake squeal at the rear brakes.
- SA-045-22 - EQUIPMENT: The purpose of this service alert is to remind dealers to keep the protective films on the piano black door garnishes attached until just before delivering the vehicle to the customer. The protective films are attached on new vehicles when
- 01-006-22 - ELECTRICAL SYSTEM: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in st
- SA-043-22 - FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA: Fsc dynamic aiming (mid-drive aiming) may not complete if the vehicle is driven on a road as described below: - the road lane markings are covered by snow and are not visible. - there are no road lane markings on the road surface. - the
- SA-039-22 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Some customers may complain about scratches on the instrument cluster lens.
- SA-038-22 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE: Service part automatic transaxles (atx) manufactured on or after july, 2018 are shipped with a blank tcm that requires configuration.
- SA-004-22c - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- 16-001-22b - ELECTRICAL SYSTEM: Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 7000c0a-na01_12002 or later).
- 16-001-22a - ELECTRICAL SYSTEM: Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 7000c0a-na01_12002 or later).
- 08-001-22b - AIR BAGS: Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with dtc B1126:13 and/or B1127:13 stored in memory. * B1126:13 - driver-side side air bag module circuit open circuit or resistance h
- 02-004-22 - SUSPENSION: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
- SA-034-22 - ELECTRICAL SYSTEM: When the telematics control unit (tcu) replacement is necessary due to a failure, use mdars to activate the new tcu after replacement. Use the information in this service alert to initialize the new tcu until the procedure on mgss is update
- SA-033-22 - WHEELS: Some vehicles may exhibit a steering shimmy or body vibration during the pdi test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be
- SA-028-22 - EQUIPMENT:ELECTRICAL:WIRELESS CHARGER/CRADLE: Qi wireless charger symptom troubleshooting
- SA-019-22a - UNKNOWN OR OTHER: Mazda connected services frequently asked questions (faqs)
- SA-017-22a - LATCHES/LOCKS/LINKAGES:DOORS:LOCK: Some customers may complain about any of the following: *infotainment center display does not provide the authorization code during the mymazda app connected vehicle enrollment. **remote function(s) inoperative. **engine start / stop **
- SA-004-22b - ELECTRICAL SYSTEM:SOFTWARE: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- 09-012-22 - EQUIPMENT: At pdi or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair spe
- 02-003-22 - STEERING: Some customers may complain that the steering wheel is off center more than 3ÿ° even when driving straight on a flat road.
- SA-026-22 - EQUIPMENT: Apple carplay / android auto frequently asked questions (faqs)
- SA-025-22 - ELECTRICAL SYSTEM: Some customers may experience infotainment door rattle noise. Follow the repair procedure to help determine the cause.
- SA-024-22 - ELECTRICAL SYSTEM: Some customers may experience an infotainment sub-woofer rattle noise. Follow the repair procedure to help determine the cause.
- SA-023-22 - ENGINE AND ENGINE COOLING: A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to mazda dealers (due to loading and unloading from transport trucks or customers moving their v
- SA-019-22 - ELECTRICAL SYSTEM: Mazda connected services frequently asked questions (faq).
- SA-018-22 - ENGINE AND ENGINE COOLING: The wsm shows 3 possible crankshaft sprocket and timing chain combinations (type a, b and c), but some vehicles have been produced with a combination of type a timing chain with 2 yellow-colored links with a type b crankshaft sprocket.
- SA-017-22 - ELECTRICAL SYSTEM: Some customers may complain about any of the following: infotainment center display does not provide the authorization code during the mymazda app connected vehicle enrollment. *remote function(s) inoperative. *engine start / stop **doo
- SA-016-22 - EQUIPMENT: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary key trace cut method b. Auxiliary key code cut method
- SA-015-22 - EQUIPMENT: If both auxiliary keys are lost, the key cutting machines cannot cut new replacement keys using the vehicle key code.
- SA-004-22a - ELECTRICAL SYSTEM: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- 16-001/22 - ELECTRICAL SYSTEM: Some vehicles entertainment system may experience the symptoms mentioned, which can be fixed with the latest software update (version 7000c0a-na01_11012 or later).
- 08-001/22 - EQUIPMENT: Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with dtc B1126:13 and/or B1127:13 stored in memory. *B1126:13 - driver-side side air bag module circuit open circuit or resistance hi
- 01-003/22 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The mazda dca-8000 is required for all warranty battery testing. If the mazda dca-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to test
- SA-014-22 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Accessory instructions can be found on onemazda under dealer resources - parts & accessories.
- SA-012-22 - EQUIPMENT ADAPTIVE/MOBILITY: Some customers may complain about the infotainment system and/or the mymazda app showing incorrect tire pressures and/or tire pressure missing. This may be caused by: incorrect calendar entry (month/day/year) after a battery disconnect *i
- SA-006-22a - EQUIPMENT:MECHANICAL: There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warr
- DRW45 - STRUCTURE: It is possible that white paint spots may be present on certain affected areas of body surface of each vehicle. The affected vehicles were potentially exposed to overspray from a construction site near the mmvo (mazda mexico) plant. All ve
- SA-009-22 - POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT: The new awd rear differential does not come with a breather cap on the rear of the differential, therefore a new one will need to be ordered and installed when replacing the differential. Note: the breather threads have a sealant and lock
- SA-008-22 - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
- SA-007-22a - EQUIPMENT:ELECTRICAL:INFOTAINMENT: Some vehicles equipped with siriusxm travel link and a navigation sd card added by dealer/customer may experience a siriusxm travel link error when selecting parking information.
- SA-007-22 - EQUIPMENT:ELECTRICAL:INFOTAINMENT: Some customers may experience a siriusxm travel link error when selecting parking information.
- SA-006-22 - POWER TRAIN: There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warr
- SA-004-22 - EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE: Customers having mazda connect concerns should have their vehicle repaired using the following repair procedure.
- SA-002-22a - ELECTRICAL SYSTEM: Some vehicles may have a "low battery risk. Start vehicle to charge 12v battery" warning message in the instrument cluster and a 30 second alarm sound. This is caused by the vehicle's electrical control area network (can) entering "sleep mo
- 00-001-22 - POWER TRAIN: Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
- MT-001-22 - UNKNOWN OR OTHER: Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.G.: steering wheel, door panels, shifter...Etc.). This may be caused by skin oils or chemicals such as hand lotions. Use a cle
- 09-004/22 - LATCHES/LOCKS/LINKAGES: Some cx-5 and cx-30 customers may find that the liftgate does not close when pressing the power liftgate (plg) rear switch (a) located on the interior liftgate trim. This may be caused by plg switch corrosion. Water from a high pressure car
- SA-002/22 - EQUIPMENT: Some vehicles may have a "low battery risk. Start vehicle to charge 12v battery" warning message in the instrument cluster and a 30 second alarm sound. This is caused by the vehicle's electrical control area network (can) entering "sleep mo
- SA-027-21c - EQUIPMENT: Mazda connect symptom troubleshooting (7th generation vehicles): customers having mazda connect concerns should have their vehicle repaired using the following repair procedure. No. 1 blank screen no. 2. Rear view camera is not displaye
- SA-013-21h - EQUIPMENT: Connected vehicle symptom troubleshooting: some customers may complain about any of the following: - infotainment center display does not provide the authorization code during the mymazda app connected vehicle enrollment. - remote functi
- DRW43-Warranty - LANE DEPARTURE: (warranty information-part 3 of 3) lane departure warning concern: on certain subject 2022 mazda3 vehicles, the ldws lane may not be displayed properly in the active driving display when the language of mazda connect is set to spanish.
- DRW43-Repair - LANE DEPARTURE: (repair procedure-part 2 of 3) lane departure warning concern: on certain subject 2022 mazda3 vehicles, the ldws lane may not be displayed properly in the active driving display when the language of mazda connect is set to spanish.
- DRW43-Dealer - LANE DEPARTURE: (letter to dealers-part 1 of 3) lane departure warning concern: on certain subject 2022 mazda3 vehicles, the ldws lane may not be displayed properly in the active driving display when the language of mazda connect is set to spanish.
- 16-002-21-3858 - EQUIPMENT: Audio, navigation, and phone concerns with mazda connect infotainment system (7th generation models): some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 7000c0a-na01_11012
- 01-006-21-3779b - ELECTRICAL SYSTEM: Battery maintenance: this service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost.
- SA-056-21 - EQUIPMENT: Auxiliary key blank replacement procedure if all keys lost (temporary procedure): if both auxiliary keys are lost, the key cutting machines cannot cut new replacement keys using the vehicle key code.
NHTSA decoded information from VIN
139 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
| Variable | Value |
|---|---|
| Air Bag Loc Curtain | 1st and 2nd Rows |
| Air Bag Loc Front | 1st Row (Driver and Passenger) |
| Air Bag Loc Knee | 1st Row (Driver and Passenger) |
| Air Bag Loc Side | 1st Row (Driver and Passenger) |
| Body Class | Hatchback/Liftback/Notchback |
| Cooling Type | Water |
| DisplacementCC | 2500.0 |
| DisplacementCI | 152.55936023683 |
| DisplacementL | 2.5 |
| Drive Type | 4x2 |
| Engine Configuration | In-Line |
| Engine Cylinders | 4 |
| EngineHP | 186 |
| EngineKW | 138.7002 |
| Engine Manufacturer | Mazda |
| Engine Model | PY |
| Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
| Fuel Type Primary | Gasoline |
| Make | MAZDA |
| MakeID | 473 |
| Manufacturer | MAZDA MOTOR CORPORATION |
| Manufacturer Id | 1041 |
| Model | Mazda3 |
| ModelID | 2074 |
| Model Year | 2022 |
| NCSA Body Type | 5-door/4-door hatchback |
| NCSA Make | Mazda |
| NCSA Model | Mazda3 |
| Other Restraint System Info | 1st & 2nd Row: Seat Belt |
| Plant City | HOFU |
| Plant Company Name | MAZDA |
| Plant Country | JAPAN |
| Plant State | YAMAGUCHI |
| Seat Belts All | Manual |
| TPMS | Direct |
| Trim | Mazda3 |
| VIN | JM1BPAJL1N1507798 |
| Vehicle Type | PASSENGER CAR |
Vehicle Multimedia
MAZDA MAZDA3-5-DOOR-TURBO-4WD Vehicle Images
Latest VINs Decoded for this Manufacturer
| VIN | Year | Model | Manufactured In |
|---|---|---|---|
| JM1BPALL4N1501958 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| JM1BPAJL1N1507798 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| JM1BPAML0N1501373 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| JM1BPBAY2N1502823 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| JM1BPBMY8N1514180 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| JM1BPACL8N1508749 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| 3MZBPBCL1NM312061 | 2022 | Mazda3 | SALAMANCA GUANAJUATO, MEXICO |
| JM1BPBMY4N1522129 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| 3MZBPACL5NM311022 | 2022 | Mazda3 | SALAMANCA GUANAJUATO, MEXICO |
| 3MZBPAB74NM313963 | 2022 | Mazda3 | SALAMANCA GUANAJUATO, MEXICO |
| JM1BPAJL8N1506826 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| JM1BPBMY6N1518082 | 2022 | Mazda3 | HOFU YAMAGUCHI, JAPAN |
| 3MZBPACL1NM303841 | 2022 | Mazda3 | SALAMANCA GUANAJUATO, MEXICO |