Toyota Corolla Matrix 2012

• Recall 150622 [USA]: In the event of a crash, air bags and/or seat belt pretensioners that do not deploy as intended may increase the risk of injury.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2011-2019 corolla, 2011-2013 matrix, 2012-2018 avalon, and 2013-2018 avalon hybrid vehicles. During certain crashes, the air bag electronic control unit (ecu) may malfunction, possibly disabling the deployment of the air bags and/or seat belt pretensioners.
  toyota will notify owners, and dealers will inspect the ecu and install a noise filter between the air bag control module and its wire harness, as necessary, free of charge. Owners were notified of the safety risk beginning march 2, 2020. A second letter notifying owners of the remedy repair will be mailed between march 16, 2020 and june 27, 2020. Owners may contact toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 20tb03, 20ta03 and 20ta05.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 144345 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2010-2016 4runner, 2003-2006 tundra, 2003-2013 corolla, 2009-2010 corolla matrix, 2004-2005 rav4, 2002-2007 sequoia, 2011-2013 sienna, 2008-2012 scion xb, 2008-2009 lexus is-f, 2007-2012 yaris and lexus es350, 2010-2017 lexus gx460, 2002-2010 lexus sc430, 2006-2012 lexus is250 and is350 and 2010-2015 lexus is250c and is350c vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began november 20, 2019. Owners may contact toyota customer service at 1-888-270-9371 or lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are j0a, j0b, and j0c. Lexus' numbers for this recall are jli, jlj, and jlk.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 123048 [USA]: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2012 toyota 4runner, corolla, corolla matrix, sienna, yaris, scion xb, lexus es350, gx460, is-f, is250, is350, is250c, is350c, and lexus lfa vehicles originally sold, or ever registered, in alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.S. Virgin islands, or "zone a." additionally, unless included in "zone a" above, toyota is recalling certain 2009 toyota corolla, corolla matrix, yaris, yaris hb, scion xb, pontiac vibe, lexus, es350, is250, is350, and is-f vehicles originally sold, or ever registered, in arizona, arkansas, delaware, district of columbia, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia, and west virginia, or "zone b." additionally, unless included in "zone a" or "zone b" above, toyota is recalling certain 2006-2008 lexus is250 and is350, 2007-2008 lexus es350, toyota yaris, yaris hb, and 2008 lexus is-f and scion xb vehicles originally sold, or ever registered in alaska, colorado, connecticut, idaho, iowa, maine, massachusetts, michigan, minnesota, montana, new hampshire, new york, north dakota, oregon, rhode island, south dakota, utah, vermont, washington, wisconsin and wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
  toyota will notify the toyota, scion and lexus owners. General motors will contact the pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on february 1, 2017. Owners may contact toyota customer service at 1-800-331-4331, or pontiac customer service at 1-800-762-2737. Toyota's numbers for final remedy for this campaign are g0p (toyota zone a), g0r (toyota zone b), h0a (toyota zone c), glg (lexus zone a), glh (lexus zone b) and hla (lexus zone c).
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 96129 [USA]: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. this could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
  Southeast toyota distributors, llc (set) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 tacoma, 4runner, camry, camry hybrid, prius, and rav4; model year 2009-2010 avalon, fj cruiser, and highlander hybrid; model year 2010-2013 model year corolla, sienna and tundra; model year 2009-2013 highlander and venza; model year 2012 prius v; and model year 2010-2012 sequoia. During modification by set to include accessories such as leather seat covers, seat heaters or headrest dvd systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.
  southeast toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on march 21, 2013. Owners may contact southeast toyota at 1-800-301-6859.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall R/2014/160 [UK]: Risk of fire
  Oil may accumulate in the turbo charger and in certain circumstances flow into the combustion chamber. This may cause engine damage. In extreme cases oil can be ejected from the engine and if it comes in contact with an ignition source may result in a fire.
  depending vehicle diagnosis modify intercooler layout to improve air flow; upgrade ecu software; upgrade turbo charger and/or vacuum pump

  Show Content

• Recall 2021723 [Canada]: Accessories
  Issue: this recall is for certain block heater kits installed on certain vehicles or sold as accessories at toyota or lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: this recall only affects the following block heater/cord part numbers: C014003034 pk5a408j09 pU14000904 C014003151 pk5a408j13 pU14000905 C014000885 pk5a489j11 pU14000907 C014000888 pk5a489j22 pU14000909 C014000907 pk5a410h00 pU14000911 C014100904 pU14000900 pU14000913 C014100907 pU14000901 pU14003571 C014100911 pU14000902 pk5a408j05 pU14000903 safety risk: engine block heater wiring that overheats or melts could create the risk of a fire. Corrective actions: toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

  Show Content

• Recall 2020013 [Canada]: Airbag
  Issue: on certain vehicles, the circuits within the airbag control module could be damaged in a crash. This could cause the airbags and seat belt pretensioners to not deploy in certain crashes. Safety risk: airbags or seat belts that do not work properly in a crash could create an increased risk of injury. Corrective actions: toyota will notify owners by mail and instruct you to take your vehicle to a dealer to install an electrical noise filter to prevent damage to the airbag control module.

  Show Content

• Recall 2019008 [Canada]: Airbag
  Issue: on certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety risk: if the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective action: owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: the canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Air bag acu electrical overstress investigation # EA19001

  The office of defects investigation (odi) is expanding the investigation to include the equipment supplier and vehicle manufacturers (oems) using this unit.The investigation focuses on acus manufactured by trw, now zf-trw (zf) , the tier-one supplier to hyundai and kia and the other affected oems.The acu senses a vehicle crash to determine whether air bag deployment is required, and if so, deploys the appropriate air bags and other supplemental restraints.Zf supplied subject acus to six oems: fca, honda, hyundai, kia, mitsubishi and toyota.Internal to the acu is an electronic component (an application specific integrated circuit, or asic) that monitors signals from crash sensors.A failure of the asic may prevent deployment of the required air bags and devices, or may otherwise affect the proper operation of the acu.The acu is located in the passenger compartment, and electrical wiring connects the asic to sensors located at the front of the vehicle.Odi’s current understanding is that a crash event may, in and of itself, produce harmful signals on the sensor wiring capable of damaging the asic, although the probability of this occurring appears to be low.While the acu incorporates electrical circuitry intended to protect the asic from harmful signals, the level and effectiveness of the protective circuitry varies by oem customer.During pe18-003, hyundai and kia filed recalls (18v-137 and 18v-363 respectively) to address a defect that could result in acu disablement and non-deployments.According to the filings, the disablement occurs in certain types of frontal crash events.Both filings discussed a condition known as electrical overstress (eos) that affected the subject asic and was likely caused by electrical signals that entered the acu via sensor wiring.The recalled vehicles used acus that had the lowest levels of asic protection while non-recalled hyundai and kia products using subject acus had higher levels of protection.Odi has not identified any eos failures in the non-recalled kia and hyundai populations.In september 2016, fca filed recall 16v-668 for certain model year (my) 2010 to 2014 chrysler, dodge and jeep products also manufactured with the subject acu.In that filing, fca also discussed an eos condition that resulted in a failure of the subject asic, which caused air bag non-deployment. Fca noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle.Other fca vehicles that also used the subject acu, but not the cross-car harnessing, had not experienced eos failures, despite similar time in service. The recalled fca vehicles used a mid-level form of asic protection.Other fca vehicles that did not use cross car wiring, or used higher levels of asic protection, have not been recalled.Odi has not identified any eos failures in the non-recalled fca population.Recently, odi has identified two substantial frontal crash events (one fatal) involving toyota products where eos is suspected as the likely cause of the non-deployments.The crashes involved a my 2018 and a my 2019 corolla equipped with the subject acu that incorporated higher levels of asic protection.Additionally, both acus were found to be non-communicative (meaning the acu could not be read with an event data recorder) after the crash, a condition found in other cases where eos occurred with other oems.No other eos events have been identified for other toyota products (including corolla models that used the subject acu since my 2011), or for the honda and mitsubishi vehicles that use the subject acu.Odi plans to evaluate the susceptibility of the subject acu designs to electrical signals, as well as other vehicle factors that can either lead to, or reduce the likelihood of, an eos event.Additionally, odi will evaluate whether an unreasonable risk exists that requires further field action.
  

  Show Content

Takata recall. The contact owns a 2012 toyota corolla. The contact received notification of nhtsa campaign number: 20v024000 (air bags) however, the part to do the recall repair was not yet available. The contact called and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

My car is equipped with a 2zr-fe engine and it is known issue for all those engines as it exhibit a mil "on" with dtc P219A (bank 1air-fuel ratio imbalance) present. Same issue with most 2012-2014 corolla which has above engine plus 2012-2013 matrix (toyota) vehicles this is very dangerous as whole engine vibrats and it makes trac off plus car will breakdown any time on the road way resulting critical situations

My car is equipped with a 2zr-fe engine and it is known issue for all those engines as it exhibit a mil "on" with dtc P219A (bank 1air-fuel ratio imbalance) present. Same issue with most 2012-2014 corolla which has above engine plus 2012-2013 matrix (toyota) vehicles this is very dangerous as whole engine vibrats and it makes trac off plus car will breakdown any time on the road way resulting critical situations

I received a recall notice for the car's airbag. It has been a few months and i have not been able to schedule an appointment to remedy this recal , as it is stated in the recall notice this is an urgent safety recall. I have been to the dealer where i originally leased my care, and they are telling me this is a popular car , and that we dont have the item in stock , the dealer also had the nerve to tell me not to drive my car untill it is fixed. This recal has been going on for a few months now and they still dont have the part to fix the problem. I have to make the payment but i should not drive it until it is fixed, this is what i have been told by toyota dealer.

I received a recall notice for the car's airbag. It has been a few months and i have not been able to schedule an appointment to remedy this recal , as it is stated in the recall notice this is an urgent safety recall. I have been to the dealer where i originally leased my care, and they are telling me this is a popular car , and that we dont have the item in stock , the dealer also had the nerve to tell me not to drive my car untill it is fixed. This recal has been going on for a few months now and they still dont have the part to fix the problem. I have to make the payment but i should not drive it until it is fixed, this is what i have been told by toyota dealer.

Tl* the contact owned a 2012 toyota corolla. The contact took the vehicle to a dealer (13775 brookpark rd, brook park, oh 44142) where it was serviced under nhtsa campaign number: 19v741000 (air bags). After the recall was completed, the contact stated while driving at 30 mph another vehicle collided into them damaging the front driver side of the vehicle. The air bags failed to deploy. A police report was filed. There were injuries sustained and the contact received medical attention. The vehicle was not drivable and was towed to allen's parma towing ( 5109 pearl rd, cleveland, oh 44129). The vehicle was not diagnosed or repaired as of yet. The manufacturer was not informed of failure. The failure mileage was 112,000.

Tl* the contact owned a 2012 toyota corolla. The contact took the vehicle to a dealer (13775 brookpark rd, brook park, oh 44142) where it was serviced under nhtsa campaign number: 19v741000 (air bags). After the recall was completed, the contact stated while driving at 30 mph another vehicle collided into them damaging the front driver side of the vehicle. The air bags failed to deploy. A police report was filed. There were injuries sustained and the contact received medical attention. The vehicle was not drivable and was towed to allen's parma towing ( 5109 pearl rd, cleveland, oh 44129). The vehicle was not diagnosed or repaired as of yet. The manufacturer was not informed of failure. The failure mileage was 112,000.

Tl* the contact owned a 2012 toyota corolla. The contact received notification of nhtsa campaign number: 20v024000 (air bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while her daughter was driving 70 mph and attempting to switch lanes, the vehicle ahead abruptly stop causing the contact's daughter to crash into the rear of the vehicle. The vehicle then spun around several times and crashed into a cement barrier. The air bag did not deploy. A police report was filed. Medical attention was contacted and took the contact to the hospital where she was treated for her injuries. The contact spent one night in the hospital to reconstruct her jaw. The police towed the vehicle to a holding lot where the insurance adjustor went out and deemed the vehicle a total loss. Bill estes toyota (3232 harper rd, indianapolis, in 46240, (317) 434-6990) was contacted and informed the dealer of the failure however, no further assistance was provided. The manufacturer was not notified of the failure. The failure mileage was unknown. Parts distribution disconnect.

Tl* the contact owned a 2012 toyota corolla. The contact received notification of nhtsa campaign number: 20v024000 (air bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while her daughter was driving 70 mph and attempting to switch lanes, the vehicle ahead abruptly stop causing the contact's daughter to crash into the rear of the vehicle. The vehicle then spun around several times and crashed into a cement barrier. The air bag did not deploy. A police report was filed. Medical attention was contacted and took the contact to the hospital where she was treated for her injuries. The contact spent one night in the hospital to reconstruct her jaw. The police towed the vehicle to a holding lot where the insurance adjustor went out and deemed the vehicle a total loss. Bill estes toyota (3232 harper rd, indianapolis, in 46240, (317) 434-6990) was contacted and informed the dealer of the failure however, no further assistance was provided. The manufacturer was not notified of the failure. The failure mileage was unknown. Parts distribution disconnect.

Common OBD-II Error Codes

• C0140 [1] C0140
• C0141 [1] C0141
• U1400 [1] U1400
• P0335 [1] Crankshaft Position Sensor A Circuit Malfunction
• P219A [3] Bank 1 Air/Fuel Ratio Imbalance