Porsche 911 2019

• Recall 206384 [USA]: A loose connection may fail, causing driving instability and increasing the risk of a crash.
  Porsche cars north america, inc. (porsche) is recalling certain 2019 porsche 911 speedster, 2020 porsche 911 carrera s coupe, carrera 4s coupe, and carrera s cabriolet vehicles. The screw connection on the rear axle upper control arm may be loose.
  porsche will notify owners, and dealers will rework and tighten the screw connection on the rear axle upper control arm, free of charge. Owner notification letters were mailed may 21, 2021. Owners may contact porsche customer service at 1-800-767-7243. Porsche's number for this recall is ama6.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

• Recall 156497 [USA]: Improper crs installation increases the risk of an injury to the occupant in the event of a crash.
  Porsche cars north america, inc. (porsche) is recalling certain 2014 cayman and cayman s, 2014-2016 911 gt3, 2016 911 gt3 rs and 911 r, 2018 911 gt3 and 911 gt2 rs and 2019 911 gt3 rs, 911 gt3, and 911 gt2 rs vehicles. The child restraint system (crs) instructions within the owner's manual may not provide enough specificity for proper installation. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 225, "child restraint anchorage systems."
  porsche will notify owners, and dealers will provide a an owner's manual supplement with proper crs installation instructions, free of charge. The recall began february 7, 2020. Owners may contact porsche customer service at 1-800-767-7243. Porsche's number for this recall is akc0.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

• Recall 147808 [USA]: If the driveshaft disconnects from the wheel hub, it can increase the risk of crash.
  Porsche cars north america, inc. (porsche) is recalling certain 2019 911 gt2 rs and 2020 911 carrera s coupe vehicles. The bolts connecting the driveshaft to the wheel hub may not have been properly tightened.
  porsche will notify owners, and dealers will properly tighten the driveshaft connection to the wheel hub, free of charge. The recall began august 9, 2019. Owners may contact porsche customer service at 1-800-767-7243. Porsche's number for this recall is akb2.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

• Recall R/2021/317 [UK]: The screw connection of the pressure input rod of the brake booster was not carried out according to regulations
  The screw connection of the pressure input rod of the brake booster may not have been tightened according to regulations.
  the brake booster must be replaced or reworked depending on the vehicle type.?

• Recall R/2020/108 [UK]: There is a possibility that the hazard warning lights will not be activated after pressing the centre console button
  There is a possibility that the hazard warning lights will not be activated after pressing the button in the center console.
  re-program the operator control unit in front center console.

• Recall R/2019/207 [UK]: Fastening nuts to secure the drive shaft and wheel hub on the rear axle are incorrectly coated
  Incorrectly coated nuts were used to secure the drive shaft and wheel hub on the rear axle.
  replace the fastening nuts and torque to specification.

• Recall R/2021/126 [UK]: The threaded connections of the upper control arms at the rear axle were not tightened with the specific tigtening torque
  Threaded connections of the upper control arms at the rear axle may not be tightened with the specified tightening torque.
  the chassis bolts will be replaced and tightened with the specified tightening torque.

• Recall R/2020/211 [UK]: The four wheel final drive screw joints to the transmission mount have not been tightened to correct specifications
  The front four-wheel final drive transmission support mounts may not be tightened according to specifications.
  the front-axle final drive will be removed and the transmission support will be secured according to specifications. If necessary the front-axle final drive and any other damaged components will be replaced.

• Recall R/2019/251 [UK]: Loudspeaker cover may not have been installed in the door sub frame
  Possible missing cover in the door sub-frame.
  inspect retrofit cover if required.

• Recall 2019291 [Canada]: Powertrain
  Issue: on certain vehicles, the nut that connects the driveshaft to the wheel hub may not be tightened correctly. Over time, the nut could loosen and may result in the driveshaft disconnecting. This could cause a loss of power to the drive wheels. Additionally, if the parking brake is not applied, this could allow the car to roll away. Safety risk: a loss of power to the drive wheels or sudden, unexpected movement of the car could increase the risk of a crash. Corrective actions: porsche will notify owners by mail and instruct them to take their vehicle to a dealer to replace the nut with a new one and ensure it is tightened correctly.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Common OBD Error codes specific to this vehicle.

• P04F0 [1] P04F0
• B1096 [1] B1096

The cars auto idle off function that saves fuel by turning the engine off at stop signs and lights in inoperative. I have had it into multiple dealers 4 times since 12/2020 with the complaint. In my opinion there is a temperature sensor that is malfunctioning and not allowing the car to go into the fuel saving mode. I am told that they are not able to make this function work properly. Wasn't the car certified for emissions and fuel economy with this function in place?

The cars auto idle off function that saves fuel by turning the engine off at stop signs and lights in inoperative. I have had it into multiple dealers 4 times since 12/2020 with the complaint. In my opinion there is a temperature sensor that is malfunctioning and not allowing the car to go into the fuel saving mode. I am told that they are not able to make this function work properly. Wasn't the car certified for emissions and fuel economy with this function in place?

Complete engine failure while driving 2019 gt3rs with less than 6ki miles. While driving on a hill and accelerating, received low engine pressure warning and engine lost power. Porsche cars north america replaced entire motor.

Complete engine failure while driving 2019 gt3rs with less than 6ki miles. While driving on a hill and accelerating, received low engine pressure warning and engine lost power. Porsche cars north america replaced entire motor.