Jaguar F-type R Convertible 2018

• Recall 184006 [USA]: An air bag that tears on deployment can increase the risk of injury during a crash.
  Jaguar land rover north america, llc (jaguar) is recalling one 2018 f-type vehicle. A portion of the instrument panel may interfere with the front passenger air bag during deployment, possibly tearing the air bag cushion.
  a dealer will replace the instrument panel facia, free of charge. The owner notification letter was mailed august 5, 2021. Owners may contact jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is h365.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

  Show Content

• Recall 136625 [USA]: A fuel leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
  Jaguar land rover north america, llc (jaguar) is recalling certain 2018 jaguar xe, xf, e-pace, f-pace and f-type vehicles equipped with a 2.0l gasoline engine. The fuel rail end caps may leak, possibly resulting in fuel vapor or liquid fuel leaking into the engine bay.
  jaguar will notify owners, and dealers will replace the fuel rail, free of charge. The recall began on march 8, 2018. Owners may contact jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is h081.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 122402 [USA]: Without the change to the flash and chime rate, the driver may not know that a turn signal is not working. if the turn signal is not working, other drivers will not be aware that the vehicle is turning, increasing the risk of a crash.
  Jaguar land rover north america, llc (jaguar) is recalling certain 2018 jaguar f-type vehicles equipped with highline headlamps. If a front turn signal indicator stops working, the visual and audible turn signal reminders do not flash or chime faster as required. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 108, "lamps, reflective devices, and associated equipment."
  jaguar will notify owners, and dealers will update the vehicle's software, free of charge. The recall began on july 12, 2017. Owners may contact jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is h026.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall R/2019/048 [UK]: The vehicle failed to routinely achieve the required levels of co2 emissions
  Vehicles failed to routinely achieve the required levels of co2 emissions.
  update the vehicle software to the latest version.

  Show Content

• Recall R/2019/014 [UK]: The crankshaft pulley retaining bolt may fracture
  The crankshaft pulley retaining bolt may fracture due to a production specification error.
  replace the crankshaft pulley centre retaining bolt with one that has been manufactured to the correct specification.

  Show Content

• Recall R/2021/248 [UK]: The passenger airbag deployment door integrated in the instrument panel facia contains an additional mesh layer
  The passenger airbag deployment door integrated in the instrument panel facia contains an additional mesh layer.
  replace the affected instrument panel facia with a part manufactured to the correct specification.

  Show Content

• Recall R/2019/273 [UK]: The static noise level exceeds the regulated maximum decibel limit
  Static noise level exceeds the regulated maximum decibel limit.
  update the vehicle software to the latest version.

  Show Content

• Recall 2018066 [Canada]: Fuel supply
  On certain vehicles, the brazing fuel rail end caps may not seal properly which could cause a fuel leak over time. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: dealers will replace the fuel rail.

  Show Content

• Recall 2017281 [Canada]: Lights and instruments
  Certain vehicles may fail to conform to the requirements of canada motor vehicle safety standard (cmvss) 108 - lighting system and retroreflective devices. In the event of a front turn signal indicator lamp light emitting diode (led) failure or failure of the headlamp module which affects operation of the front turn signal indicator lamps, the required warning needed to comply with the standard is not provided. As a result, drivers may be unaware that they would not be able to clearly signal their intentions to turn and/or change lanes, which could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will upgrade vehicle software to correct the issue.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Vehicle delivered to customer with battery not secure (this battery is located in the trunk, behind occupants)

Common OBD-II Error Codes

• B11DB [1] B11DB
• U1A4C [1] U1A4C
• P026A [2] P026B, P026C, P026D, P026E, P026F ISO/SAE Reserved
• P0780 [1] Shift Malfunction
• P228F [1] Fuel Pressure Regulator 1 Exceeded Learning Limits - Too High
• P064A [1] Fuel Pump Control Module
• P0251 [1] Injection Pump Fuel Metering Control A Malfunction (Cam/Rotor/Injector)
• P0256 [1] Injection Pump Fuel Metering Control B Malfunction (Cam/Rotor/Injector)
• P025C [1] Fuel Pump Module Control Circuit Low
• P242B [1] Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 3
• U1000 [2] CAN bus network code
• B1B87 [1] B1B87
• P000B [2] "B" Camshaft Position Slow Response Bank 1
• P0014 [2] "B" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
• P054A [2] Cold Start "B" Camshaft Position Timing Over-Advanced Bank 1
• P0302 [2] Cylinder 2 Misfire Detected
• P0303 [2] Cylinder 3 Misfire Detected
• P0341 [2] Camshaft Position Sensor Circuit Range/Performance (Bank 1)
• P0011 [4] "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
• P052A [4] Cold Start "A" Camshaft Position Timing Over-Advanced Bank 1
• U3000 [3] Control Module
• P0012 [1] "A" Camshaft Position - Timing Over-Retarded (Bank 1)
• B1412 [1] Driver Power Window Motor Circuit Short To Battery
• B0034 [1] ISO/SAE Reserved
• B0035 [1] ISO/SAE Reserved
• U2109 [1] U2109